45O Case Dozer. FOR SALE $4500. Will it START this time ?!!!

In this video we head back to the Dozer to try to see if with a little bit more help we can get it started. Will it start?? Stick around and find out.. and remember DontbeWily..
If interested in purchasing this machine email us at [e-mail].
SERIOUS offers only. Thank you.
FOR BUSINESS INQUIRIES EMAIL ME:
[e-mail]

[@slick12284]

Good to see Wily in charge for a change 🤣🤣 Love the video Wily!!!!!!!

[@DontbeWily]

Lol Thanks for watching

[@jsimm4587]

I’m glad to see you two I seen Hank has the classic channel now but it should only have one video and that’s the John deer 310 !!!!!! You two are so much better together but apart it’s awful serious !!!

[@richardphelan8414]

Instead of don't be a Wily ,it really should be don't be a Hank

[@eatsinabeat]

Hank is better off sticking to machines with tyres...

[@ruchknruchkn6575]

@@eatsinabeat ya bicycles!!! Just joking!!

[@staind288]

Poor hanky

[@marksaunders2500]

In this position i used kinda reverse psychology on steel tracks as a went over and between few stumps caught debris and pushed track inside so i used branches etc working up to smallish kinda 10" 15" log jammed it into track and drive spocket creating a (""frictionable surface "" ) ↩️ (word of the day "" frictionable 😂) and steered it on drive sprocket first then leveraged front over idler as you did with blade and chain but excellent job and valiant effort guy's as always👌

[@DontbeWily]

Thanks for sharing We are back on it

[@marksaunders2500]

@DontbeWily good luck from across the pond thanks you always for your time be safe and see you soon 👋

[@tomgriffin286]

It was good to see Hank helping on one of your projects. You did well to get it started after the water sitting in the engine. Keep the videos coming I appreciate all the effort you put into them.

[@timjustice2953]

Put a block behind the blade, loosen the tightened cylinder,pull the blade backward which will back the front drive wheel back more. I use a come a long to hook the track on put it on the dozer housing. Crank the come a long up put front track on.

[@marqlocklear9526]

Miss you and Hank together , please when you both have time , the subscribers will love to see will it start to together again ❤

[@DontbeWily]

Thank you for that.

[@RODALCO2007]

That was a very wet engine. Brilliant! That was a fast cold start. It looks like that there is a heater element on the air intake, for cold days. Nice running engine.

[@DontbeWily]

Thank you

[@nelsonprice7018]

Great job anyway God bless all of y'all

[@justinvickery446]

Put the check behind it get it up in the air you've got to spin the track while you put it on and there's a square knot up by The idler that you have to take off your grease fitting is in there you pull that and you'll be able to take the grease fitting off and it'll release the tension and then you can spin the track 2 release and then it should slide right on you can take the truck right back up and you'll be good to go. The grease fitting square cap over it.

[@DontbeWily]

Thanks for sharing We are back on it

[@williamallen6934]

Put the idler in the front on first then pull the back out with a chain then move the dozer forward 10 minutes it's on I got lots of practice lol.

[@DontbeWily]

Thanks for watching

[@allenmoore4400]

They can be a pian in the butt need to take grease fittings out a push the tensioner in to give you slack for the track to go on

[@DontbeWily]

We are back on it Thanks for watching

[@Joe.M]

The greese fitting to release the front idler was right on the ldler yoke.

[@randyownby4714]

Was that a battery that I saw Hank carrying? Nice to see Willy in charge 😄

[@DontbeWily]

Lol. Thanks for watching

[@juliangerardcascio1111]

❤😂 Wily & Hank , both of you Men are Great 👍 for a great 👍 Laugh 😃, and Thank you 😊 Both 😊!!!!!

[@danswartwood4580]

Thank you for your APPRECIATION to your subscribers Wily too.

[@sksoundman]

Nice video Glad to see ya got it started. To bad the trac is so hard to get on. Looks like a nice little unit. Great team work 🙏

[@ncadburns1020]

I'm sorry but Hamiltonville Farms ain't got nothin' on Don'tbeWily. I enjoy Wily's get to it type attitude. I don't need all the jokes and silliness. Wily is on the serious level!

[@barneysmithers9542]

Love watching your videos Wiley. Great job with that one. Keep up the good work and you are still my hero

[@theodoredugranrut8201]

So glad to see someone that knows what he (Wily) is doing

[@DontbeWily]

Thank you.

[@fester73666]

Cool video Wily, Jacob and master mechanic Hank, good job on getting the dozer running again 😎👍👍👍

[@floridagunrat1625]

I've got the same exact machine sitting here at my place over by the space coast. I parked it when the 08 crash hit, and I had to shut my little construction business down. I don't think mine will be as easy to start as this one was, but I put a new bottom on it just a couple hundred hours before I last parked it, so at least I don't have to worry about the tracks coming off. Like the other folks had said, I would focus on the drive sprocket first. If you can catch a few teeth, it'll pull the track back on, and that'll help a lot to walk it over the Idler.

[@DontbeWily]

Thank you for watching and sharing

[@bluerebel01]

Well, guys you gave a hell of a good try. Thanks for sharing and looking forward to more.

[@DontbeWily]

We are back on it Thanks for watching

[@davida.p.9911]

Great job on getting it running. 👍 im sure if those bolts hadn't been rusted up, it probably would have been easier to get the track on. Ya'll gave it a good effort! 👍 Thanks for sharing, Wily!

[@rirebel6029]

Howboutcha! You guys got to get the tension off that track adjuster then the track will go right on like you said !!

[@lucmarchand617]

Can't believe the knowledge you have about the stuff you pick up in field.i saw lot people around in canada but you guys is top my list.all iron left and move this is cool for people educate about machine Thank you video

[@DontbeWily]

Thank you and thanks for watching

[@JerryMcDowell-ex6rx]

You two make my day I wish I could do that stuff with yall

[@DontbeWily]

Thank you

[@stevemilligan727]

Hey Wily! Great episode again Sir! I always enjoy watching you and Hank working on the farm and Construction Equipment. Me and Daddy used to work on Construction Equipment together and I miss those days very much with him. My Daddy was a mechanic for Brandeis Machinery here in Kentucky and I followed him in that career and even on the weekends we would work on different dozers and front in loaders together, Engine, Steering Clutch, other hydraulic and tracks were part of the things we would tackle. Try getting the track on the sprocket first and like the other guy in the comments said with the blocks and putting it in reverse it could walk the track onto it. God Bless you and Hank along with your Families. Maybe someday when I visit Florida I could meet you both😂

[@DontbeWily]

Thank you for sharing Thanks for watching

[@makariosoconnor7380]

Need to bring a tool set to loosen up The idler so you can easily get it on back on and bring a a 50-ton bottle jack Gagarin they're really easy

[@garymessina1609]

Great job you got it running but tracks are another story great video thanks Wylie and Jacob and Hank

[@DontbeWily]

Thank you We are back on it

[@markm1964]

the grease plug for track tensioner under the square headed plug right behind the idler thumbs up i used to run one just like it had tilt jack only diffrence

[@DontbeWily]

We eventually found it Thanks for watching

[@MikeMcCue849]

GREAT VIDEO WILEY, THE BEST VIDEOS ARE YALL LOADING SKEETERS ON HAUL TRUCKS, I HAVE NEVER LAUGHED SO HARD IN MY LIFE.

[@RobertGregory-ix6hs]

I think 🤔 you Hank will be able to get it to run 🏃 you’ll have a great day

[@slick12284]

It’s SAD that it is harder to get out of the USA than it is to get in 😳😳

[@stevewhyte8476]

No comprende !!

[@slick12284]

@@stevewhyte8476 Wily was talking about how long the guys had to wait at the border

[@stevewhyte8476]

exactly@@slick12284

[@anthonypiligno7618]

🎉 as always thank you for the video guys...🎉 That Andrew guy would have had that done with his bare hands...😂😂 LoL LoL...🎉 thanks 🙏👍... JJ.. Jonjon...😊😊

[@Chi-TownHound87]

Good one, Wiley. Engine sounded great.

[@stevenicoson6670]

Thanks for another great video. It was interesting and enjoyable. You got that one running good Wiley and hank. Amazing the amount of water that came out. That machine runs nice yet. With some talc would be ok for someone. Nice work guys. Good job. Thanks The Iowa Farm Boy.

[@DontbeWily]

Thank you We are back on it

[@allensharlow7763]

Good job Wily

[@RustyInventions-wz6ir]

Thanks. Love your channel

[@ralphriddle8864]

Very nice job and God bless y'all

[@dalehartley-vd9qo]

You guys gave it really good try in some cases that's all a man can do you and Hank will get it next time

[@pavil58yt]

Maybe attach the chain to both edges of that track and then lift with another tractor?

[@davidcolesr.8628]

Good to See You Fine Gentlemen, My Boy asked me “how Fine are they Pop?” I Told that Boy, Y’all are Finer than Frog Hair & that’s the Gospel 😂. Always a Pleasure to have you Great Minds in the Same Proximity, it’s Entertaining if Nothing Else. God Bless You Men, you keep Posting & I’ll keep Watching, until next time. Keep it Safe Out There Fella’s

[@DontbeWily]

Thank you

[@markmunro4554]

Hank and Willys rooster wears fish net stockings but they always get her done . Ether equals chug ch ug zoom.❤😂😂😂.

[@bigbill709]

I worked 5 years at a case dealership in Charleston West Virginia 1978 /1983

[@DontbeWily]

Thanks for sharing

[@anthonyyoung7344]

Don't know where Thay come up with the injection pump going bad that case188 engine is the best engine case ever had Thay never gave any trouble my dad is a licensed mechanic from case

[@1932cheytruck]

Hank that was painfully to watch ya'll try that track lol . look right behind that front idealer take out the pipe plug cap , remove the grease fitting then push idealer back in , after that the track will fit right on. (install back sprocket first) after track is on put grease fitting back in and pump grease in leaving about 1" slag in track

[@DontbeWily]

We are back on it now Hopefully we get it this time Thank you for the info and watching

[@toddfrisch737]

Dang good video. Y’all did a heck of a good try with the track. Wish I could of seen it move

[@luvtruckin]

Don’t worry you’ll sell it with the track off besides the sprocket is worn out anyway so it’s all good.

[@starlarattesnake942]

Another way is to spilt the track at its connector all unwed is a come along

[@jonbender9110]

The plug is right behind the take-up idler you take that plug out under it there will be a grease fitting take its out

[@DontbeWily]

Video is out on that now

[@mikenutt48]

Not a fan of Hank

[@stevewhyte8476]

To say the least !

[@bobward2101]

He’s about as much use as an ashtray on a motorcycle ! 🤣 but he does make the the comedy team shine.

[@lloydbethel252]

Definitely need to pull the idler back and get that track off the ground to be able to get it back on track lol

[@DontbeWily]

New Video is out if you haven’t seen it yet Thanks for watching

[@tallyman15]

The pain working on the track reminds me of the Cat you were trying to remove the injectors - very painful.

[@DontbeWily]

We are back on it Lol on the pain. I feel your pain

[@dman-ks9rf]

put the sproket on then ider after you release grease then walk it on

[@kosh7911]

Just keep “Less Hanking and more cranking!” a thing please! 😂

[@raulmarceloechenique]

Hola amigos como andan trabajando los dos yse pone en marcha y a trabajar que lindo lesando un abrazo alos dos Marcelo de argentina

[@dman-ks9rf]

take the grease fitting out right behind the idler

[@DontbeWily]

Thank you We are back on it

[@frankstandifer6307]

Not wanting to be a arm chair quarterback, but could have hooked a chain to the track right in front of the rear sprocket and pulled out and reversed the right track to get it on.

[@DontbeWily]

We are back on it Thanks for watching

[@alkennedy1124]

Ok note to self ,,, post industrial battery nuts fit right on strarter post, lol good job thanks BigAl California.I’m looking for a all wheel drive inexpensive 7000 pound to 10.000 pound cap fork lift, lol thanks.

[@DontbeWily]

Thanks for watching

[@RODALCO2007]

That is a very clever interlock on that starter lever.

[@barney2633]

Very entertaining .

[@stanmusk767]

Wiley every time I see you. I think Papa Smurf

[@DontbeWily]

Lol. Thanks for watching

[@wilfredosuganob4157]

aha...this is ur youtube channel uncle wily...im watching ur video together with sir hank im from philippines

[@DontbeWily]

Thank you for watching

[@wilfredosuganob4157]

@@DontbeWily ur welcome....

[@michelferreyrolles6434]

bonne entente entre les comperes....vue en france...

[@joepotenza1349]

If u boys had that tread moving forward and pulling at same time ,she would a popped back in place . Just sayin ..god bless y’all

[@DontbeWily]

Thanks Thank you for watching

[@jiffy399]

Wench might help to get that track back on

[@jamesnapier9328]

I could tell you a lot of things on that size dozer before video came out ive worked with one on and off for 10 years

[@jerrywatson7176]

Do you think you could rig a snach block from the blade to the back of the dozer and back to the pully on the track and use the hydrolics on the blade to pull the pully back?

[@DontbeWily]

We are back on it

[@smity7096]

Remove the greese zirk under that cap right behind the idler wheel. Im screening its right there lol.

[@DontbeWily]

LOL We are back on it Thanks for watching

[@HoseaChan-hn9kv]

You so amazin🥳😊🤟

[@thomasturco5870]

Put the back on first then the front should go on easier

[@micahhenry4998]

Those tracks can be stubborn on the 450 I had a friend who had a 450 and the track on the left side would come off every now and then he rebuilt the adjusters on both sides and after time the left one would still walk off

[@DontbeWily]

Thanks for sharing

[@neilmoore3856]

Watch Wiley Work.

[@MrBIGNAWD]

I HAD THIS SAME CASE 450.. IM TALKING TO YALL AND YALL CANT HEAR ME THROUGH THE SCREEN ON HOW TO START THE DOZER.. LOL DAM GOOD LIL DOZER,ID LIKE ANOTHER...I HAD TO GET MY INJECTION PUMP REBUILT .. COMEALONG TO COMPRESS THE FRONT,RELEASE PRESSURE .. NEED 2 BIG PRY BARS..WISH I COULD SEND YALL PICS OF MY 450 UP IN THE AIR PUTTING THE TRACK BACK ON AFTER I WALKED OVER A STUMP AND CAME OFF.. I CUT A TREE AND PUT UNDER BLADE ON THE END AND PUSHED IT IN GROUND AND ADDED ANOTHER TO GET HIGHER,ABOUT 4FT HIGH LOL...PUT UR TRUCK CLOSE TO TRACK AND USE A COME ALONG TO UR HITCH TO KEEP PRESSURE ON TRACK AS YOU PRY IT OVER AND IT WILL FALL IN PLACE THAN PUMP IT UP WITH GREASE AND ADJUST PLAY OUT AND SAME ON OTHER SIDE AND SEND IT.... USE A 4X4 FROM BLADE TO TRACK OR A COME ALONE TO COMPRESS THE IDLER, OPEN THE FILL NUT AND PULL FITTING OUT MAKE IT EASYER...WISH I WAS THERE TO HELP....

[@DontbeWily]

Thanks for sharing We are back on it now. Hopefully this time we get it. I did some of the things you said do. Thanks for watching

[@judybailey7249]

Dear wily how do you get to the seals between the transmission and rear ended on a j.d. 350c I ,m sure hank does not know

[@DontbeWily]

Lol I don’t know either.

[@peterscullion8100]

maybe a head gaskit .

[@geraldingram9351]

You guys are funny

[@morgansword]

Hey there guys.... you musta heard of easy outs before... well they make a "female" easy out and its a left handed deal like any easy out cept ya have a socket instead of a stud that sticks out, that female one slides over a nut or bolt head and you put your tool in gear to loosen it, harder ya pull the tighter it gets.... DO NOT USE THOSE CHEAP ONES AS THEY BREAK AS QUICK AS YA PUT THEM ON... NO CHROME, always when using those female easy outs to get the impact type. The cheap ones just seem to break so easy and yer a gonna use that impact on them anyhow. If ya look inside them sockets I am speaking of, you will see the swearl of the inside of the socket designed to get tighter as ya pull on it.... it might just get to be your most favorite tool... they make em for each and ever size ya got of what yer taking off. That swearl gets smaller and smaller as it tightens on the part yer trying to get out.... it will even grab a bolt stud that has the head of it broke off and just grabs the saft part. I just kinda thought ya all had seem em before

[@DontbeWily]

Thanks for sharing Thank you for watching

[@glennjukes5581]

Maybe this time-someone will stick a bucket or coffee can over the exhaust. Hello?

[@randydunn6988]

Be a willie

[@Truklodyte]

I enjoy the videos ,but why didn't you just separate the master link? It should have been a couple hr job. There is enough slack in the track. Just by how much droop in it. Using the bars to jump sprocket is dangerous, it could slap you into next week or 6ft under.

[@DontbeWily]

Lol on slap you into next week I looked for a master link but did not see one. If you haven’t seen the next video on this yet it is now out Thank you for watching

[@Truklodyte]

I have watched all, never saw anyone look for master link. I KZbin other channels they showed two different master links for that model. One needs air hammer, the other had 4 bolts and a saw tooth look that interlocking . Why build something you can't take apart, most modern vehicles are built in such away you can't fix. My transmission in my jeep is sealed.

[@anthonymerrell536]

Has this tractor sold yet?

[@DontbeWily]

Yes it has. Thanks for watching

[@kalimuthumovie1886]

👌👌👌👍👍😊🥰

[@wendellbrown2215]

What’s the price

[@DontbeWily]

4500

[@dancase9019]

Typical Case stubborn to the end

[@samdurbin6566]

Cyl full of water

[@williamallen6934]

Lol hànk gets paid to think

[@JerryMcDowell-ex6rx]

Hank needs to wash lol

[@DontbeWily]

Lol

[@Michael-hc3iw]

Preacher creature one letter different 🤓

[@s.hinote2984]

$4k where’s the dozer at?

[@DontbeWily]

Florala al

[@davidguntren4487]

😮😅😅😂😂😊

[@thomaswaxler4478]

Your 10 minutes is up

[@ft133]

Need a ball peen hammer.

[@dougshadrick9776]

Why don't you all take the grease fitting out of the Ram on the idler and let the grease out and push the ilder back give you more slack

[@DontbeWily]

We finally figured it out in the next video. Thanks for sharing

[@-mike--m-9629]

Did anyone check and see if the dozer had any oil pressure?

[@-mike--m-9629]

I like y'all's vids but you sure as $hit don't know how to put a track on a dozer. Take the grease fitting out to collapse the front idler in. I did my first one by myself when i was 15 😂😂😂

[@DontbeWily]

Thank you and i agree on putting a track on We are back on it

[@robinsnyder8877]

Glad you found the starter button, I told you it was between your knees. You have to get the track started over the rear sprocket first. After you have a few sprocket teeth gripping the track, put the track in reverse until all of the sprocket is in place. Once it is on the sprocket drive backwards over one of those big wooden blocks, the bigger the block the better. The weight of the machine on the block will hold the track in line with the bottom rollers. As you back up more bottom roller will start to line the track up with the front idler. Keep backing until the track goes in place over the front idler. Hope this helps. Robin in WV.

[@DanielTorres-xi5ru]

Or reverse

[@DontbeWily]

Yes you did and Thank you We are back on it

[@richardneale246]

Great to see you both working together, as always. 👍👍👍👍 22:17 here in the United Kingdom. Remember ........ Don't Be Wily !!!!

[@DontbeWily]

Thank you for watching

[@sherrys1566]

behind the Idler there a 3/4 pipe plug with square head on top of the tensioner under that plug is grease cert remove grease cert put a 4x4 between blade and idler and angle back toward idler and push the grease out. The Dozer Dude Oklahoma.

[@DontbeWily]

Thank you for sharing and watching

[@Jacob_Tribal]

✌️