48V 500W Ebike or Electric Bike Brushless Motor Controller with Hoverboard, wiring explanation

[@Sherlockohms303]

THANK YOU SIR BECAUSE OF YOU I FIXED MY SON SCOOTER THANK YOU FROM BOTH OF US YOUR A GOOD GOOD GOOD TEACHER.

[@g3user1usa]

I'm an electrical knucklehead and I even understood your tutorial. You broke those wire functions down really well and showed how they function. I'd like to spend some time practicing with the controller, motor and throttle set to memorize each of the functions but I think I get the basics. All those wires looked overwhelming but if you break them down into groups and colors, it's not so bad. However, my scooter has dual controllers (one for each wheel), so I'd need to see how they're connected to each other, which isn't covered in this video. Both controllers must work the same so there must be shared connections if dual motors are selected. There also should be color-coded wiring diagrams given with controllers to simplify things for newbies. Thanks for the informative video, just in case I have a need for some trouble-shooting help.

[@ElectroniClinic]

I have a very detailed video on this, i built a trike electric scooter using two hover board motors and i used two controllers. I was able to control both the motors using only one switch and one throttle.

[@micjon7620]

life is soooo simple when you have real teachers. thank you sir for clearing things up for me. the numerous videos before always left me confused and therefore frustrated. you are blessed.

[@ElectroniClinic]

thank you so much for this comment.

[@marshal7102]

Very Good Tutorial, Best I've seen so far. Great explanation of all steps in wiring up the system. Very Very Useful!!

[@ashikabbas4862]

Best description of controllers I found!

[@MHsiddiqui786]

Best description controller Bundle of thanks bro

[@DarkSaber-1111]

Well this just took a load off my shoulders! I was going crazy with all these wires and colors!

[@jonspeak2807]

Thank you 🙏 I just started my journey of bldc control. I appreciate the great tutorial!😊🎉

[@johnbrowning3924]

Thank you very much with your help I got my ew 36 running really appreciate it

[@rosendopuigpichuante9076]

Great description! Clear english. Regards from Málaga.

[@goodvibes0101]

Very informative content have liked your video 👍

[@georgec7798]

Hi, great job explaining the wiring. I would really like to know if it's possible to connect a wheelchair controller to the exact setup you are showing. Thanks

[@s-tazipart1750]

This is really brief, useful and straightforward, great explanation you deserve this comment👍🏿👍🏿

[@digicabtech]

What are the other last 3 wires (green, yellow, purple) for? This is where I 've got stuck!! Can you explain in details for each of them?

[@arjanv.daalen9686]

Thanks man. You have been a great help. Not even the supplier gave this kind of info. Superhappy.

[@fesacendoncillo7239]

Thanks for you, i understand your eplaination so clear or me.from samar

[@deoz5620]

So very clear and easily understandble and you make it look so simple and easy knowing how an ebike controller works! Maybe next time, you can show how to wire a digital display speedometer and how it works. Thanks and more power !

[@StarTrooper47]

Thank you for sharing this video as the fist controller has burned because I hook up alarm wires (all of them lol) and sparking joy lol. I have learned A lot from your videos. I will purchase another motor controller and give it another try.

[@wimalihalawela8948]

Your this presentation is very helpful to solve my problems.Thank you very much.

[@chiefmight142]

Very Informative Video👍🏿👍🏿👍🏿👍🏿

[@AscoltaNet]

You are perfect bro

[@rachidbaaira9869]

great explanation, thank you from morocco, I wish tha I see you made a scooter with this motors

[@ElectroniClinic]

@@rachidbaaira9869 I have done it. Check the playlist.

[@teroa7l117]

Ur the best man, i was looking so long for a good titoriel vid for this

[@azimzain1211]

Good explanation, now i can replace my scooter controller Myself. Thanks

[@MyAssassin36]

Very slow paced imo but all the information is there and it's a very good video for beginners.

[@John_Smile]

Thanks so much for all the explanations ! I watched this clip because I ordered a Throttle with a wrench (5 wires) and I don't know where to tie the blue wire. But I learned many other things.

[@johnbennett8087]

U are very good at explaining this

[@themastereal8345]

really helpful for my ebike conversion, thanks 👍

[@bhaskargvv3540]

Wonderful explanation

[@vinodnadoni5047]

Really very informative video.

[@LuisMacias-p4q]

wow, high quality teaching in here

[@Rockcastlekid]

Simply amazing ! I subbed . thank you. Have a Blessed day.

[@noearias2006]

THANK YOU FOR YOUR VIDEO. EXCELLENT INSTRUCTIONS JUST TALKING WHEN YOU NEED TO ❤😊

[@howitstartsmm]

Thank you for your time and knowledge. I appreciate your clear explanation and practical application. Very well done

[@Histoshape]

That video helped alot wiring a Controller to my hooverboard motor 👍👌 THANK YOU

[@AlejandroFelix-ir3hu]

Ok sir it's going to be 2 in the morning , I'll continue watching more videos tomorrow, see if I could fix my bike tomorrow , goodnite

[@______________740]

On 14:47 can you put a wire with a switch so it can switch between fast mode and slow mode?

[@wimalihalawela8948]

Your this presentation is very helpful to sole my problems. Thahk you very much.

[@gunghoadventures871]

Awesome presentation.

[@colintinker7778]

I really appreciate your time in producing this video. Exactly what I have been looking for to control the same motors as you have in your demonstration. Thank you.

[@ElectroniClinic]

Thank you so much Colin for appreciating my work.

[@ФеофанЭтополедолжнобытьзаполне]

TLDR: connect all wires by their color, if you have extra wires just ignore them. That's some tutorial.

[@brayden3435]

Bro thank you this helped me out a lot. U a real one.

[@danielb5337]

OMG THANK YOU SIR!!! You are a genius!!! Never understood the function of programing cable! You fixed my bike!

[@ZoomyWheelz]

This guy is the best

[@MrD-w2i]

Really helpful, many thanks

[@techhho2791]

Very good job boss

[@woodcarvingworkshops]

thankyou your video very good. plenty of gratitude to you

[@miserabledoubt9251]

I would like to know how you modified the wires to fit in, did you cut them and add an external part or did you just remove a mark of it and taped it?

[@estebanbravo6407]

A very good and easy to understand video! Appreciate it a lot!

[@almen1594]

very clear explanations and perfect timing. thanks

[@terrorent]

The last 4 wires you can use for other things? I wanted to know exactly what the last wires you show are for. The instructions say the single green is a meter line. What would that connect to? The single purple says it is for LCD instrument line. How would that work? And by the way the single yellow line is the high brake wire.

[@muslimspeechchannel]

Thank you, Amazing video

[@kenmcfarland4287]

Thank you for your video, very helpful. 👏👏👏👏

[@suryabejibun]

can the controller immediately forcing the motor to switch direction before the motor stop spinning ?(close throttle, switch reverse/forward, open throttle before motor stop spinning)? Like 15:53 but faster

[@saadialahmer2706]

Good video ❤

[@curliecardenas]

Great video.. thanks 👍

[@mattwilliams1635]

Great video; is there an easy way to increase the max speed by modifying the signal from the speed control connector?

[@randywhite7434]

Thanks a lot you really helped me on understanding

[@SharafatAli-ts8dm]

Very good sir.god bless u

[@zkillzixx6692]

Thank you so much sir, you saved me a lot of time. much love

[@DJSpannamanUK]

Excellent bro

[@renegarcia1807]

Very interesting, very well explained clear and easy to understand congratulations on the job well done

[@marcdannan5655]

Thank you this video has helped me with the final information I needed

[@miketayse]

Very useful, thank you!

[@NightSeed_0]

Can i ask what is the max W we can use on a hoverboard wheel?

[@bobdebouwer7835]

1500 watt

[@michaelconnor5922]

Very well explained. Thank you. Subscibed

[@rizzman6671]

Thank you sir. Because it enlightens the pldc and the way the connection works. I have a question. I've been following, how you show me in this video.But the tayer still does not spin. Can you please explain what my scooter electric bike problem is?

[@Clystuff19]

Hello, the max speed(3rd speed) is the max speed the motor can do? Or it is limited by the controller ? Thx If u have the 3rd speed and change the motor with another type it cand be different speed?

[@fluidmind3629]

can i get 3rd speed if i short the wires, i dont have the speed botton

[@pedieasuncion6875]

I fixed it I guess I used the two green plugs to program it ty so much bro I’m happy ty

[@murraymadness4674]

Great example of how to hook them up. However, how can I get braking with these controllers? They only have off as 'brake', not actual braking.

[@ElectroniClinic]

Ya, this is the main issue everyone is facing. It needs to be modified. I think we can add disk brakes.

[@HouseMixProductions]

Hello Sir Thank you for a very educational video. If I want to remove the speed limiter on my electric scooter, how do I do this? Is this one of the wires on the HALL sensor? My wires have the same colors as your first controller in the video. I have a Velocifero Minimad plus.

[@AndrewSinka-ni5xe]

I have this exact controller but I have a 1000w pexmore moter and I can not get my 3wire throttle to work for the life of me what can I do to make it work

[@jayk2k]

on my controller for the throttle cable , (well I think it is the throttle cable) here is four wires , red , black , green and a yellow . What might the yellow wire be ? I do not actually a twist throttle grip to try connect . Also is there a way to test the circuit without a twist throttle ? is the a diy throttle I can make ?

[@nayakacreativity3639]

Does the motor get super hot if I upgrade to 500w controller ? Please reply sir thanks 🙏

[@ElectroniClinic]

i am using 500W controller, the motor doesn't get super hot. you can check my video on trike electric scooter. i tested it with guys standing on the scooter :)

[@nayakacreativity3639]

@@ElectroniClinic Ok sir, what voltage did you use 36v or 48v ?

Thank you very much for this. I have just one aditional question. I'm building a eBike from a Hoverboard too. I will use the hoverboard ON/OFF switch, connect it to the thin red wire that you showed and explained, but how/where should I connect the plug for the charger? I was thinking I should connect it also to the Red/Black thick cables from the battery. Is this correct?

[@unlimitedchaos347]

I think so 🤣 how'd it turn out

[@mdarojmechanic]

ধন্যবাদ ভালো ভিডিও ভাই

[@pedieasuncion6875]

Firs of all tank you for the video,is t. mandatory to conect the sencer wires

[@abdullahyousef3596]

9:10 I don't have this red wire (switch wire), I don't know how to turn on the motor controller, can you please help me.

[@beauty.produc.t]

Hi where you able to fix your problem? If so how? I also don’t have the switch wire in my controller.

[@tobiasblackler8255]

Mine doesn’t work, I hooked everything up as in the video but the motor moves for a split second then stops, I have no clue what it could be?

[@lucasankone9555]

Fixed it?

[@HalfonsoSPRAGGUS-gs5gx]

Y dose,not work either 😢

[@SanelKeys]

Try different motor wire combination for set hall sensor wires.

[@tobiasblackler8255]

@@lucasankone9555 not yet😪

[@tobiasblackler8255]

@@SanelKeys I tried different combination for the three motor wires and nothing changed :(

[@azam2821]

GREAT VIDEO

[@xerejuneseve6333]

The ground wire is the same black in all sockets,so we can use one ground cable for all functions?.

[@Mursu5555]

Hey, i have a question, do these have a speed limiter and how can u remove it if needed, keep up the great content🎉

[@electronic7979]

Super

[@ElectroniClinic]

Thanks

[@hajjism]

Hi . its always nice to watch your videos with a lot of amazing projects, thanks. I am not cleaver onto electronics but I just have some hobbies. I want to make my first mini bike using water from my old hoverboard and controller. The problem I notices is when I put up the speed the motor slowing down and the speed control displace also switch off. Could you please help on this case? Thanks in advance🙂

[@ankurbhatnagar4609]

Very nice and informative video! Would you have a video about implementing all these functionalities in this video (start, stop, speed, reverse, brake, etc) using a Raspberry Pi/Pico/Arduino?

[@ElectroniClinic]

Ya I am designing an Android app for this.

[@megavoltelectrocycles]

Very helpful video ! Thanks a lot. We use the QS Hub Motor 3000W 12”. Can you tell me what type of programmer I can get to adjust the controller settings ? Are these motors considered sinusoidal ? Thanks a lot for your help !

[@carolsjukebox]

How did you wire the battery charger plug on a controller thanks

[@Jehutynd]

Awesome video! Thank you!

[@fauzi_ahmad.7363]

if the motor is given a voltage of 48 volts and we use it to transport the load it won't be damaged?

[@krzysztofbaran9342]

can you connect 2 motor to 1 controler ?

[@rocknaveed2512]

Good bro 👍🤯

[@mharoon5741]

Very good Information

[@reaksmeiam7372]

Hello How i buy it ?

[@leskeometv]

Yo i have the brushless motor controler 48v and 250w, motor 48v 250w so max speed on e bike is 36kmh what to do on the controller to go faster

[@MrIntercoolers]

Thank you great help

[@adammajerczak2493]

thanks for this video

[@JohnKimble-v6l]

Where does the kickstand switch sensor connect to the controller? I bought a kickstand switch for my scooter but can’t find a connection on the controller.😊

[@Lamoboos223]

Hi, my controller doesn't have the ignition red wire but i have two wires called power lock(red and orange), how do i connect them without switch? I mean to which wires i should solder these two wires?

[@OK-st9st]

Is it possible to connect multiple of those motors to one controller. If it was 2000 watt esc with 4 500 watt motors. For a ebike

[@ElectroniClinic]

Every motor should have its own controller.

[@ElectroniClinic]

I did try when I was working a trike scooter but it didn't work. Then I used two controllers. You can watch that video.

[@FerozKhan-c2v7s]

issue with BMS I am trying to buy new BMS and my battery pack is 52v will work with this BMS ?