I followed all your fixes and nothing work. I finally found my issue with the cables that run under where the front wheels come up came dislodged causing the wheel to hit the cables. Putting it back in place fixed it. Just letting people know incase anyone else finds themselves in the same boat. Thank you for this!
@taylorgunn32152 ай бұрын
@@BeTheSniper awesome! thanks for the feedback. Hopefully your experience will help someone else!
@PintorMadrid2 ай бұрын
Great info. I removed the spring on the same side you did and it did not work, put it back and removed the spring on the other side and that worked!!! Thanks for the video, really helped me
@allissondrabellile-hallibu68038 ай бұрын
THANK YOU SO MUCH😂😂😂😂 3 hours of pointless videos and yours helped us fix it!
@HustonGurley23 күн бұрын
Thank you for the video...this fix help me big time. was just about to thrash it
@FYMCODY2 ай бұрын
Searched everywhere this did the trick thank you so much
@christinafiorvante33977 ай бұрын
THIS FIXED IT!! Thank you!!
@cococarina62165 ай бұрын
Thank youuuu. I tried everything else. Nothing worked. So had to try this and it fixed the issue
@big_z3419Ай бұрын
This worked so thank you but then it wasn’t able to bear my son’s weight (13 lb). If I apply some counter resistance with my finger under the seat it works. Not sure if you had this issue at all
@TomatoKiller218 ай бұрын
Thanks a lot! I was gonna throw mine away but this fixed it and idk why either!!
@jemmarussell49494 ай бұрын
This worked for us! But before putting it back together how does this fix work with a baby in it? Will it support the weight? And any idea why this works?
@Mericuhwow4 ай бұрын
Very helpful thanks man. It also works for the 2011 model as it's pretty much the same hardware
@EatYourOwnBacon4 ай бұрын
I think I’m going to take mine apart and try this. Mine worked fine without the springs, but with a load it didn’t work well. I noticed when I put the springs on, it put WAY too much prsssure on the wheels, and it would cause the thing to think there was an obstruction. I disassembled the entire thing and clean and lubed everything, but as soon as the springs went on, it would fail immediately.
@patriciamontoya57199 күн бұрын
Same here, but my next question is will it hold the baby
@alrikelouw638410 ай бұрын
You're a genius!! Thank you!
@taylorgunn321510 ай бұрын
You're welcome!
@bmaher488210 ай бұрын
Having the same issue and was ready to throw it in the yard and then removed the spring and it runs. Wtf lol. Perhaps the up and down motor is getting weak?
@DilangizHakberdieva5 ай бұрын
thank you so much i was just about throw out mine too so i though i might as well just try out this and it worked.
@elclavo12 ай бұрын
This definitely helped! Actually it’s the only thing that worked, until it had the weight of son in it. If anyone has another life hack , I’d appreciate it
@Ezm873 ай бұрын
God bless you!!!
@kirstencook422921 күн бұрын
What is the jam like substance on the wheel ?
@taylorgunn321521 күн бұрын
@@kirstencook4229 grease
@tanzilakavkaz626919 күн бұрын
Lube
@Joshua-c2r9 ай бұрын
I was just about to throw mines away until I seen this video
@brytneybrewer17076 ай бұрын
Mine isn’t turning on at all??
@Mojo1468 ай бұрын
My fix was the belt underneath of the roo
@yellowslug1437 ай бұрын
What did you do to fix it? I think the belt is my problem as well, and I was thinking of replacing it with a vacuum belt, but I need to figure out the size.
@HollyRupert6 ай бұрын
@@yellowslug143 use an o-ring, like for a faucet. The size is 1 3/4 in. O.D., 1 9/16 in. I.D. (Size#38) Your local hardware store should have one.