4Runner Low-Profile Off Road Bumper - How To Install C4Fab!

Today we are adding a low profile metal off roading bumper and winch to my Dads 4Runner. HERE is the bumper: www.c4fabrication.com/product... Here in Utah we get a lot of snow on the roads in the winter. And cars get stuck quite often. This winch will most likely spend time helping other people get unstuck.
If you want to know how to remove the bumper on your 2018 Toyota 4Runner TRD Pro this video shows the process. Installing a winch and led light bar on a 2018 toyota 4runner is not too complicated. Especially after watching someone else do the same project first.
This is the winch I used: amzn.to/2KkfYl8
(winch install video: • Smittybilt X20 Waterpr... )
C4Fab's own instructions: www.toyota-4runner.org/c4-fabr...
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
Snapchat: bit.ly/1UAb2Fq
GooglePlus: bit.ly/1YyKice
TO SEND ME STUFF: See my P.0. Box on my 'About page': / jerryrigeverything
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

[@paritosh4361]

00:56 yeah.. Get the time from your invisible watch agent 47.

[@rugvedk109]

New HITMAN 2 Gameplay has introduced cloning ability it seems

[@zaidKhan-pj3gg]

family of Hitmans 😁

[@jericosunio9673]

Or Luthors 😂😂😂😂😂

[@MichelPostma]

Love seeing these Car upgrade videos! 3 and a half hours is not a lot of time for such a project, great job!

[@TechDove]

Something about seeing that perfectly slot in where the black plastic was, while adding additional functionality is so satisfying 😍

[@ohhepster1138]

So great to see you and your dad working together! My dad passed last year and I miss him every day! Cherish those moments! @ZacksJerryRig

[@purposelygaming]

Need more videos on this channel. I love all the DIY stuff you do away from your main channel.

[@_thegreasemonkey_]

You are the best KZbinr in the world. You are my inspiration. I love watching your videos. Please upload some more Automobile related stuff. Love from India ♥️

[@NAVYABHAN]

I am very happy that I found you! It gives me more information to modify my own 2016 Toyota 4Runner. My biggest drawback has been on ow to approach installing electronic's. On an "Old School Car", it was never a problem. Now I have to learn all over again, but that's okay!

[@kyleburns9439]

Gotta love the toyota loyalty haha! I'm undecided what to do for a bumper on my FJ Cruiser. I feel like the stock bumper on my rig doesn't look good enough to invest in something like this, but I love it on both of the trucks you guys have

[@abishekiyer8419]

Lol you're an actual pro at these. Nice job!

[@luckistryke13]

Jerry, love your voice, you could make hellA money with voice-over job for Hollywood and commercial lol. Thanks for the video. I’m planning to get this bumper for my TRD pro. It looks so OEM.👌

[@loudandclearmedia]

Nice, clean install and great step-by-step. Subscribed.

[@tomthorn2887]

I really like this design! It looks good on the 4Runner without making it look drastically different. I can see this going on my 4Runner for sure!

[@BhanuPratapSingh-fz8fl]

Love the colour of your truck and the fact that its a manual 👍

[@schip624]

What watch model is that at 0:56? A new Apple Watch Edition where they removed the watch and charged you 8 times more just to look at your wrist? LOL

[@CP-kb1du]

Obviously your here to Support Apple ..instead of the Mod... apple makes products only to not support them shorty after ... hopefully your watch will be a paper weight soon.

[@CACressida]

When I installed my winch bumper on my FJ, I wrapped those tubes with rubber hose i sliced and zip tied to protect them from rubbing from vibrations offroad. Just a piece of mind.

[@rostamr4096]

Nicely done and looks good.

[@mikeaustin5670]

I like your thinking in trying to keep the OEM look by using a low profile bumper - I'm considering the same approach.

[@needtoknow204]

Awesome video, learned a lot!!

[@rommelrivera1186]

Great job and it looks cool. I don't feel like doing the work, though. Having trouble finding a shop that can install it for me in Phoenix, AZ. Thanks for the video!

[@maminparvaresh]

Thanks a ton for uploading.

[@rubenvf9772]

Nice Bumper and the good thing is that it doesn't change the front of the truck to much.

[@ch.illmatic]

That's a good looking truck👌

[@shahzaibkazmi1888]

Good video brother Good luck for the future ❤️👍 👍

[@peterdamson5705]

I always trust a good bald man. And you the man, my man!

[@TanjimTheTechGuy]

Nice job 👍

[@ggchrisbeast6240]

That looks so nice

[@lordtrini]

father and son... perfect...

[@hussientv8398]

best youtuber ever

[@travisbaird9243]

Hey, Jerry. I love the video awesome stuff man. Thanks for sharing this. Just curious as this was posted coming up on six months ago, but what are your thoughts post-install? Do you guys like it? Any pros or cons? How is it holding up, Winch on, light bar good, performance etc? I’m looking at doing a similar type install and wanted to get your thoughts if you would have done anything differently. Thanks in advance. Maybe a quick follow up video. Keep up the great work. Digging the channel can’t wait to see more stuff related to the 4Runner.

[@leeboat]

Nice Wilier bike in the background!

[@mohammeda1409]

good relationship between father and son

[@syahirsofian2588]

thank you for your exiting videos

[@umairnoman786]

Zack’s dad looks like “Hisenberg” from Breaking Bad.

[@abc32119]

Well done!!

[@RomboutVersluijs]

Dang your pa has a sweet ride :)

[@istiakahmad4727]

we want more of this please... and make these videos longer also. seems so fast

[@caiobhp]

0:56 is the proof that you are a robot

[@MichaelKeelphotography]

Looks great, I had one put on a few days ago. Everything good, except today when I went up a driveway into parking lot, there was a light clunk on the passenger front side. I tested it again at a little faster speeds going up and then down different driveways into parking lots etc. Same clunk, thump sound. This is a 2019 trd pro 4runner with only 15,000 on it. Thought I'd ask if you might have an idea of what it is. Bushings, sway bar, something else the auto place didn't do right. Torque not correct etc. It wasn't there at all before. The winch I can see is attached correctly, bumper is in there, everything is bolted down tightly, my skid plate is bolted down tightly etc.

[@pjninja9546]

Your dad seems cool Zack, more videos with dad in it please! Also - is it safe to remove that big beefy crash bar? Would the bumper's metal strength adequately compensate the strength lost from the crash bar?

[@paritosh4361]

You look like your dad's son. Lol.

[@SA-kc3iu]

I love my dad

[@elmedinii.n]

good work

[@timher6300]

Video is awesome. Subscribing

[@5nickers]

ok so for real, some lab just cloned the "dad" so dad can have a younger version of himself to make all the stuff he still wants to :D

[@AsgerMadsen96]

Sweet!

[@mayankpatel1053]

Good to see your dad though.

[@jjbasilis3280]

thanks for the video. your 4 runner definitely looks more beasty! do toyota dealers do this mods, for those who dont have your skills?

[@b.lemire7453]

I live in a two-plate state. Is there a mount for the license plate on the C4? Great install video. Thank you for taking the time to show us the install.

[@JohnRivers-ol5tv]

Me too 🤷🏽‍♂️

[@damianflores2091]

The moment you check the time on your "wrist watch" hahaha

[@nolimits63]

So by removing the plastic and the rebar you’d changed some physics around. Those impact sensors you saw won’t operate the same. If a vehicle is in a loss and has an aftermarket brush guard or steep fancy bumper we won’t reinstall it because you change drastically the reaction time of the srs system

[@JohnRivers-ol5tv]

Proud daddy 🤩

[@HumbertoCristobal]

Dayum I was like I know this guy

[@jericosunio9673]

Jesus, like father like son baldness👌👌👌👌 Lex Luthor will be proud

[@700_Hunter]

Nice

[@TheCoxClan]

Wanna put one of those on my Toyota Corolla? 😂

[@gutslayer3687]

Yea on the old XLi versions

[@paritosh4361]

Get your vehicle tip top for the mission agent 47.

[@BoeBoeCooks]

Which selection of light bar did you go with here? There’s like 4 options I think. I wanted to make sure mine were white like this. Thanks!

[@b.roa2366]

How I wish we got those 4runner here in the Philippines. That looks cool

[@ptolemyp-w]

Hi again on the small channel

[@iceplanetchris2052]

More Toyota videos please

[@francowj]

Curious, how much weight was added to the vehicle with the new set up, winch, light bar and all??

[@fromdusktodawn509]

Is the c4 LP bumper’s impact resistance rated higher than the Toyota aluminum crash bar?

[@jkuoverland8507]

Any added noise from the interface of the bumper and skid plate? Thanks

[@OSAbsolam]

with the added steel bumper and winch. did this add weight to the front end. Does it sag down a bit more. Or do you guys have lifts or leveling kits on there.

[@JohnSherman2]

How do you access the manual lever on top of winch?

[@DavidLee-ts7pb]

What size exactly is the bolt you put into the sides? I think you said 19 but I’m having a hard time finding one similar to fit mine.

[@seandanielsen8311]

If you don’t mind me asking how much was it to Powder coat

[@cosmiclyrics2307]

Now i know where you get that cool hairstyle of yours from :v

[@300zxdriver]

How hard is it to remove the fender liners? Wouldn’t that ease access to fog light plugs?

[@FairladyZ808]

Your dad should have gotten the Southern Style Off-road slimline Hybrid front bumper instead cause they sell a High clearance side protector that makes the 4Runner look more aggressive looking

[@TheGeerty]

Looks like you guys are in Utah. Where did you get the powder coating done?

[@adam10532]

Did you notice the front end lower due to added weight?

[@dreamer9071]

JerryKnowsEverything

[@4bvenom733]

4runner have the evo x headlight

[@nelsonrodriguez7390]

this kind of bumber c4 fab is not making it anymore?

[@axios76]

@ZacksJerryRig , did it really take 14 weeks to manufacture as per the website note?

[@rastaman2525]

With the crashbar removed, won't the shock of impact be directly transmitted to the frame and likely cause much more significant damage? A low speed impact might have been absorbed previously prior to frame damage but that might now not be the case?

[@dallas5374]

rastaman2525 soy boy?

[@eduardonarvaez6205]

did you or your father sold the crash beam. If not, I would like to buy it 😬.. I’m planning a facelift for my 2013 4Runner and need a 2014 up crash beam

[@violinist86]

Mr Clean Sr!!!

[@centermass3454]

Can I get that low profile bumper for a 2011 4R without the winch, but with the light bar ?

[@omegabeta3305]

you dont void warranty with those?

[@subiemon]

nice

[@986C]

Please detail how to install an elevator in your 4Runner

[@lanelee1736]

do you still have the trd black bumper valance? if so I will buy it off of you

[@itsnotcris]

Where did you allocate the fog light wire?

[@bretstutler9830]

What did you do with the black plastic you took off the front?

[@brian4984]

Did the weight pull the front end down much?

[@David-Dumont]

GL

[@egzibr7950]

could it fit on a toyota prius

[@oem9929]

How much weight did everything add to the front . ?

[@TheDrakanMaster124]

Will this work on a 2014 trail model

[@NoibatYayya122345554339]

I love a car

[@pauleinsig]

You should join the Tacoma World.

[@theskeletonking4895]

I really think you should add some kit on it or maybe also a bull bar and also led headlamps and led taillamps. It would give the truck a much better appearance

[@vicerichter1163]

omg the comments just crack me up, ranging from "hitman" to "heisenberg", and constant references of porn stars. ahahah xD

[@Socaloverlander]

Did you powder coat or sprayed it ?

[@esi178y6]

Did you want to sell the black part of the bumper that was removed? I would be interested in purchasing it if you are.

[@samirwalieddine5516]

Agent 47 got buffed

[@eliashyberg4743]

7:30 in the morning but wheres tje clock?