4Runner PreCut Kit v1

If ordered after Sept 18, 2022 please watch this build video: • 4Runner PreCut Kit Bui...
During this video, I will walk you through the steps needed to assemble the Toyota 4Runner PreCut Kit 2001+. The kit will be shipped flat packed, when unpacking you will find all the precut wood pieces shown in the video needed to build your system in 1-2 hours.
This kit will build dual 36" slide-out drawers with locking drawer slides. Inside each drawer are 2 removable dividers to organize your supplies. You can choose between 3 options of false tops to turn each drawer into a cooking or workspace. The system is cut out of a high-quality 7ply poplar core wood, then CNC'd to make the building process effortless.
Buy Our Kit Today!
www.SolidWoodWo...
GET 10% OFF SOLAR PANELS, INVERTERS, BATTERY CHARGERS, AND MORE!
I've partnered up with RENOGY to get my SUBSCRIBERS a discount on the best solar products in the industry! To receive the discount follow this link renogy.sjv.io/... then enter "SolidWoodWorx" in the coupon section for 10% OFF!

[@jeepncj7]

This is like Ikea meets overland (but 1000x more fun). Well done! I am just finishing my build, but now kind of wish this was an option!

[@TheMfmccarthy]

Dude I'm really impressed with your business model

[@gregnorvell9730]

Awesome idea and design. Pretty much made it idiot proof. Don't have a 4runner but if I did, I'd have it in mine.

[@yadadameet]

This is soooo rad dude! Been following ya ever since your 1st gen 4runner walkaround. I own both an ‘86 and ‘07 4runner and would love your systems in each of my rigs. Ya down for it??

[@SolidWoodWorx]

Sure send an email [e-mail]

[@wagul4650]

Is the4runner the only car you can add drawer in your company. I have a 2002 qx4 and I would love a kit for it

[@SolidWoodWorx]

At the moment the 4runner is the only vehicle yes.

[@erickdiaz6152]

Do you have plans for making one for the Jeep Wrangler JL ? (2018+)

[@SolidWoodWorx]

Not yet, please send an email so i can get you on a list for when i do have one ready! [e-mail]

[@PapaP86]

Such a great system, going to be ordering one soon.

[@Adam-cw2ew]

I just got mine. Haven’t assembled yet... but I watched this video a couple times and I can’t wait for the wife to go to bed. This is a really great product, from design, to wood quality, to instructions, to personal help. I highly recommend.

[@tima4901]

This is amazingly well done! Sending this to a number of friends immediately. Affordable, flexible, sleep platform, drawer slides.. amazing kit for a great price. Would love to see more makes/models added!

[@SolidWoodWorx]

There coming in time!

[@alanfaulkner6329]

Brilliant job mate. You should be well proud of your business. Well done to you and keep up the good work.

[@JBSwanstrom]

This is brilliant, now I want a 4runner!

[@ARC928]

Do you recommend using glue in addition to the screws?

[@SolidWoodWorx]

Glue doesnt hurt. i do recommend it on the drawer fronts to side jam attachment.

[@sethmarion2833]

Super interested! What is the weight of the 5th gen setup?

[@SolidWoodWorx]

Around 120lbs installed

[@donjones3355]

Wow, looks real nice. And made of Plywood. Great!

[@The007jayzee]

Do you have a kit for gx470 2007

[@SolidWoodWorx]

I do check my website www.solidwoodworx.com

[@seanoatman1775]

This is kickass! Will be ordering one for my 3rd Gen asap!!

[@runnerhtx4898]

JEZZZ 1400$ is insane for some wood they have metal kits for less wow that’s crazy

[@jcordova69]

Will you be making kits for truck beds? I’d love to get one for my f-150?

[@SolidWoodWorx]

Next year

[@raearnold83]

Looks great, how much is the Kit?

[@SolidWoodWorx]

www.SolidWoodWorx.com to find all pricing!

[@LorenzoCerezo]

Gracias

[@JoshWilliamsPDX]

Damn! Wish I would've seen this before I bought your plans and made my cuts! Live and learn!

[@johndboran]

Looks like he bought and learned to program a CNC. Good for you Brian....greetings from Texas.

[@CristianAyala0285]

I wish I could buy this for my 4runner man 😩😭 keep up the good work man I just started following you and I love your content so far much love from California

[@maddawg161]

Great production quality really good idea

[@name.terrie]

Great design. Awesome demo. You so rock!

[@TuanNguyen-ld8kl]

Hello Brian. Do you have any plan for the Jeep Gladiator? Or something universal like 44" wide x 60" and 14 or 15" high would fit a lot of short bed trucks. Would love to have something like this, especially since you're local to me. Also lots of Gladiators in Socal

[@SolidWoodWorx]

I do not im sorry

[@NorthernCoveCreations]

I wish I could afford, but single parent so kids needs first

[@zalllon]

Really good, smart building and innovative

[@212caboose]

I hope someone brings you a GX460- I'd LOVE to see a product like this for the '460...

[@SolidWoodWorx]

It is in the pipeline for mid next year

[@SimpleOneSnapVlog]

I'm impressed and that's what exactly what I needed. Can you make one exactly for my Honda CR-V 2015 too?

[@SolidWoodWorx]

I do no have that model sorry

[@ONELAPSEMedia]

okay now make a kit double cab tacoma rear seat delete. Seats are 70/30 so you can sell the kits as a pair or separately if someone needs to keep a seat for a kid or pet

[@SolidWoodWorx]

It’s come in this year I promise

[@ONELAPSEMedia]

@@SolidWoodWorx haha okay, I’m currently making my own to custom fit my camera gear but man the Tacoma groups and forums are filled simple with rear seat delete posts

[@p7vitale]

Will you be making these kits for your Baja build? Looking for my 2021 Toyota Tundra CrewMax shortbed. Say yes please!!

[@SolidWoodWorx]

Not for while only have so much time

[@Bas-G]

Absolutely brilliant!

[@LloydMayes]

Great video

[@mohammadalmanasser9295]

Hi. Do you make it for Acura MDX 2002

[@The_Chin]

I’m planning on removing my 3rd row seat and installing this..would it still be a direct fit?

[@SolidWoodWorx]

Negative

[@henrikm4657]

Nice kit! What’s the total weight (equipped like the one in the video)?

[@SolidWoodWorx]

8"

[@henrikm4657]

@@SolidWoodWorx huh? It weighs 8 inches?

[@javier2surf]

Strong work brother, strong work!! Hopefully, you'll be able to ship to Alaska....love your channel!!

[@SolidWoodWorx]

I probably could be would need to email me to get a shipping quote

[@the_ure]

Great work, Mr. Tinley.

[@NigelNaughton]

Wow!! Nicely done!

[@brucesinclair9628]

Still following this, and the "how to" is great. Going to send this to a club member that just bought a 4runner... I know you said that you were working on Jeep JKU version, how is that coming? Thanks

[@SolidWoodWorx]

Not till next year

[@jonsidds6963]

This is awesome! Definitely would have bought this rather than the headache I gave myself building mine in my 07 4runner. Rest assured when I get my 2021 I will absolutely buy this. Without a doubt telling all my boys about it to. How many different vehicles do you produce them for or did I just not pay enough attention

[@SolidWoodWorx]

4Runner right now and moving to a few more vehicles by the end of the year, Stay Tuned!

[@karanjohnson5562]

I want one for my 2009 Tacoma please make one someday I’m not woodworking talented 😄

[@SolidWoodWorx]

Next year

[@rheise55]

Do you suggest using any wood glue where the joints meet? Would that be overkill?

[@SolidWoodWorx]

It never hurts! I would suggest it most where the drawer face meets the drawer.

[@erniegarcia4724]

Omg... that's so awesomeness. Are we able to order the precut with some different options like maybe instead of two drawer just one drawer and some how Attached to the platform of my 4runner? Nevertheless, love it.

[@SolidWoodWorx]

The kit comes with hardware to mount it to your 4runner. But i do not have any single drawer options because it needs strength in the middle to sleep on it

[@abdielgonzalez1218]

Do you make these with a surface height even with the wheel wells on a 5th Gen 4Runner? I’m really interested in this system.

[@SolidWoodWorx]

The height is about 1 inch lower than top of wheel wells

[@altonsparks5486]

Have you made one for Suburban

[@PaulWellner]

Just curious on a basic drawer design, Do you need to have a bottom wood piece or could I replace that with L brackets to my floor? Seems that the slides themselves would create the bottom structure of the box and could just use L brackets at the sides base. Just wondering if you had done that before. Seems a waste to bolt a box floor to another floor like Goose Gear floor as an example. Oh and nice work!

[@SolidWoodWorx]

For my system it is imperative that i have a bottom to keep everything square and much easier to work with.

[@PaulWellner]

@@SolidWoodWorx I understand and they look great! Thank you for your response

[@PaulWellner]

@@SolidWoodWorx One more thing. Which video would you recommend to view for a simple two drawer design? I have a 2021 Jeep Rubicon with a slide out fridge and am needing a two drawer design for the other side in the back. Thank you

[@SolidWoodWorx]

Can you send me some dimensions? [e-mail]

[@PaulWellner]

@@SolidWoodWorx I ended up designing one with SolidWorks. Just finished it last night lining in with marine 1/4" carpet to minimise rattling noises while driving. I had to design in a hidden removable bottom in the lower drawer to access the Jeep jack well. Could have just bought removable slides for the access but didn't think about it. Could share the design if you are interested. I didn't do fancy interlocking joints though. Just used L brackets on the box and yes a floor with a cutout as well for the jack access.

[@shaunnash2209]

Would love to see something for the smaller SUV like the Honda CRV . Love the channel

[@SolidWoodWorx]

Sometime next year will be adding some of those models!

[@whatarewedoingouthere]

This is really great. Can you update your link in the description so that it’s clickable?

[@SolidWoodWorx]

Yes I just did sorry about that and thanks for the feedback!

[@chrisjoseph2468]

Awesome kit, love to see one of these for the draw-bed set up for a truck bed and cap. Great work!

[@SolidWoodWorx]

Ill start on a Tacoma next year

[@five99mike]

@@SolidWoodWorx Yes, I'd buy a Tacoma one drawer/bed kit similar to the colorado build!

[@duchche]

Your the best dude

[@the_bencredible]

How do you create the lip on the inside of the drawer that the false top sits on?

[@SolidWoodWorx]

The cnc does it but I’d used to do it with a dato blade

[@stuartarneaud218]

Great idea man well done

[@MegaCocobaby]

Hello Brian, do you have a camper double sleeper with kitchen setup and storage kit for a Chevy Colorado? Let me know?

[@SolidWoodWorx]

I do not yet sorry! Hoping to get into the truck setups next year

[@MegaCocobaby]

@@SolidWoodWorx ok thanks. I'm subscribed to your channel so when you put it out there I'll get it. You do great work 👍👍👍.

[@tightlinesgl47]

Nice work!

[@derekmilligan]

Any chance that you will be making these for a first gen Sequoia in the very new future?

[@SolidWoodWorx]

Yes I will be but will take awhile to figure out the shipping systems. So I will have the kits available for pick up soon!

[@derekmilligan]

@@SolidWoodWorx Oh hell ya! Im up in the Sac area. It might be time to take a little mini vacation down south! Let me know when you have them available! Thank you!

[@jonsotirakopulos4390]

Please make this for outback

[@SolidWoodWorx]

It’s coming in a few months!

[@thomasgianakouros6324]

you should do a full drawer build set by set!! I'm sure a bunch of people would love that.

[@SolidWoodWorx]

This is a full drawer build?

[@thomasgianakouros6324]

@@SolidWoodWorx sorry I meant like a custom build you do for one of you clients. anyways keep up the good vids

[@phatkatmeowmeow]

Need a pre-cut system for Highlander

[@SolidWoodWorx]

What year

[@phatkatmeowmeow]

@@SolidWoodWorx 2010 toyota highlander

[@qtwikeepa9857]

Would this fit a 90 series prado

[@SolidWoodWorx]

Unsure i would need some rough measurements of the back cargo area.

[@JorgeDiaz-xr6cx]

Ey hi I wonder how can I get one precut for my 4runner 95? Thank you for you response!

[@JorgeDiaz-xr6cx]

Or how I can get in contact to getting help?

[@SolidWoodWorx]

You can find all the information on my website www.solidwoodworx.com

[@thiagobencke306]

This is brilliant! I would love to have one of those pre-cut for my old rav4! Maybe a universal pre-cut drawer system?! 650mm deep so it could fit any SUV.. just an idea if you don't have it already. love your work mate!

[@SolidWoodWorx]

Email me with your cargo dimensions.

[@evacanlifeeva499]

Can it ship to Canada?

[@SolidWoodWorx]

Yes

[@taylore2470]

Do you use 3/4" pieces with dados to make the separated compartments on the drawers? Or, is it two 1/2" pieces of plywood glued together with space in between for the separators?

[@SolidWoodWorx]

The dados are made only 1/4" into the wood, and the dividers are 1/2" thick.

[@seegas1]

What material thickness do you use for your builds, especially for the surfaces to sleep on?

[@SolidWoodWorx]

3/4"

[@lookingoodclub]

For locking door slides on each drawer working mean four individual cut outs on the door face

[@SolidWoodWorx]

On my website you can add options for the locking drawer slides and there are only 2 holes 1 on each side.

[@lookingoodclub]

Are the cubby hole boxes separate options with the kit ?

[@SolidWoodWorx]

On www.solidwoodworx.com you can choose with or without cubby sides.

[@dandemore8057]

Would you be able to do a custom variant with half? As in one drawer? I want to have max space on the other half of my 4Runner for mtb storage.

[@dandemore8057]

Love your work btw been watching for years now.

[@SolidWoodWorx]

It would be bit of a waste to buy this kit and cut it in half but if you follow the plans i sell im sure you can make it work

[@deadreckoningoutdoors]

What’s the weight each drawer can hold?

[@SolidWoodWorx]

6"

[@Auxbeam]

Hi Do you need some great lighting for your car to help you better driving, off-road. We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!

[@S_Bonham]

What’s the dimensions on this?

[@SolidWoodWorx]

Unfortunately I cant release that info. I have options to fit 3,4,5 gen 4Runner.

[@S_Bonham]

@@SolidWoodWorx no problem, was looking to upgrade from my cobbled together box I have in the back of my pick up to something more professional like this.

[@eddieflo3987]

Hopefully for 01-07 Sequoia sometime next year?!? Cheers

[@Adam-jf7bd]

Awesome idea, overpriced

[@SolidWoodWorx]

Would love to hear your feedback on how you would go about doing the same for a lower price.

[@Adam-jf7bd]

I’m sure a lot of R&D went into this. I’m purchasing the plans. Thank you.