Are they Ready? The VFC ARs? My Honest Opinion | 值不值得買? | The Honest

[@4UADSmartAirsoft]

Sponsor & Any Good Stuff 影片裡的好東西在下方連結 Go check out 4UAD new arrival & lubricant pen 【4UAD 相關商品在下方連結↓↓↓】 store.4uadsmartairsoft.com/ Special Thanks: ➤ VFC Airosft: They got a whole lot of trademarked guns Goods : www.vegaforce.com/site/index?lang=zh ➤ACETECH: you guys do make some amazing Grenades and Tracers Amazing Grenades : amzn.to/3EFsI2W Bifrost Tracers : amzn.to/3us9Xhs Official Web: www.acetk.com/ ➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!! Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html

[@Jorigin]

Can you please post a link to some high def photos of the modified hop arm? Can't really see it in the video as well.

[@perfectman2547]

What a riview, VFC has been my favorite brand, 2016 was bad expirience with VFC for me, but you guys convince me to try VFC product in 2022, now i had 4 vfc GBBR again

[@4UADSmartAirsoft]

We all need time to learn and adjust thanks for giving them another chance

[@likhangwong7701]

Thanks for all the testing and honest comments. I look forward to seeing some testing about gas efficiency because I play in the UK, where sometimes we experience problems at low temperatures, e.g., below 10 degrees Celsius.

[@4UADSmartAirsoft]

Yah we are getting that chilling machine up and running again stay tuned we will do that soon

[@alcapo9600]

I have a VFC XM177E2 on the way… ordered it yesterday. This video has got out at a perfect time and giving me an excited mentality to watch how it performs and how to improve it for the next year to come!!

[@4UADSmartAirsoft]

Yah man glad we helped in someways I’d you needed some help shoot us some messages, we can help you with that

[@alcapo9600]

Thanks I’ll remember that!

[@林哲宇-y4j]

如果Vfc 能在hop精度方面能改善就好了，曾經接觸過Vfc的hk417 v2跟fnx45，兩者都會發生hop不上不下的現象，問題是在飛機噴嘴到hop座壓點的距離，簡單講是噴嘴太短bb彈上膛後無法跟壓點貼合，使得每次上彈的位置都不同，但如果換成壓點較長的hop皮，是可以些許改善不上不下的現象，但沒辦法調太深的上揚，因為轉太深hop反而變成阻礙讓bb彈打不出來卡在膛內，如果vfc 能在這區塊做改善的話就更好了

[@roydcosta1302]

Thanks you for testing first, and then unboxing later! A nice refreshing change

[@4UADSmartAirsoft]

Sounds like a plan we will keep that coming

[@albertlambo1979]

Another informative and excellent video by the 4UAD crew. I had some store credit at a local shop that I need to spend and end up ordered the SR16 E3 CQB (most recent production batch) as this video helped me formed my decision....Cheers! Will come back to this video to see how to improve the hop up arm later on!

[@4UADSmartAirsoft]

Good luck buddy! Glad we helped a bit :D

[@Ghost-Multicam]

Loved that Blood diamond's rifle!

[@4UADSmartAirsoft]

Hot isn't it XD

[@Ghost-Multicam]

@@4UADSmartAirsoft Great job👍

[@greenlightforce]

​@4UADSmartAirsoft please announce the hop up arm release soon. I prefer a machine made hop up arm rather than gunsmithing it as shown. :) i like your team's approach to testing. You could create a scientific and measurable method on getting the best hop trajectory. Once an optimal value has been determined, use that for all distance testing comparisons so that they are even more consistent. Keep up the good work 4uad team!

[@4UADSmartAirsoft]

Thanks buddy, and yes the solution will be out very soon (Nov.8) Stay tuned :D

[@greenlightforce]

@@4UADSmartAirsoft Thank you Sir for the update! I can wait for that. Stay true to science! More power to your team!

[@totorosnowlax_13]

初入坑 , 第一支GBB是VFC的M110K1 ,感謝辛苦拍片各種介紹測試和講介 , 讓我有更好的入坑體驗

[@4UADSmartAirsoft]

我們繼續努力謝謝支持

[@ferdinandolatin2125]

Very amazing content. Vfc should pay you. Hop up is most important in fun factor. Before i try my friend vfc ar’s. I really confuse why people says it is good. It s so awful. But now, internal, external, performance are excellent.

[@4UADSmartAirsoft]

Its our way to return to this lovely community :D

[@DarrenMassey-t2i]

Awesome feature length content! The XM177E2 still my favourite looking version, but love that 3 round burst on the A2. I might just be tempted to get a VFC GBBR. Big ❤ from the UK 🔥🤘

[@4UADSmartAirsoft]

Let us know if you run into some issues, we can try to help from here

[@PhantomM16]

4UAD inner barrels are coming!

[@badwitchproject]

There are two things I have found consistent with VFC since I bought their first gen 416 aeg many years ago and that is: excellent bodies full of detail and woeful internals with their QC being one of the worst imo. I see far too many negative reviews of their products that I refuse to buy them and I'd love a GBBR full length M16a2 or an XM177 but I cannot justify giving them money in the hope that they've fixed their qc issues on this model.

[@4UADSmartAirsoft]

Yah their old lines of products do have some real issues, and when it comes to the parts supply that becomes another problem. Based on my personal opinion I think they improved, but they certainly can improve more

[@badwitchproject]

@@4UADSmartAirsoft last year I watched through quite a few of your videos, your hard work alongside BadaBings videos convinced me to buy not one but two MWS's. Love the work!

[@4UADSmartAirsoft]

@@badwitchproject when you are not sure what to get, MWS won't let you down :DD

[@sogerc1]

Interesting insight with the hopup arm. The way you described it the same thing might be happening with my WE G36, I will check it out. I don't own any VFCs. IDK their MO these days but years ago they made such small batches of everything that whenever I wanted to buy one of their replicas they were always out of stock, their UMP .45 I kept on my wishlist for the longest time, for years, it never reappeared so I just kinda gave up on VFC alltogether. These days I consider my collection pretty complete so unless VFC releases something really interesting I will not own any of their replicas. Or maybe if something breaks in an unrepairable way I will get the VFC alternative to replace it.

[@4UADSmartAirsoft]

Try it man, it will help greatly

[@James-rd1se]

以前一直都是用馬牌，近幾年嘗試過朋友的733，果斷跳槽VFC 板機扣壓換了鋼那感覺更美，後座力洽到好處，外觀又是最好的，價錢也比其他的低 不過VFC這個成本控制大師，玩的時候沒感覺你一拆開來就知道，現在他們好像預估玩家一定會換管換膠，也在內管那降低成本😂

[@4UADSmartAirsoft]

內管我覺得其實還不錯欸，哈哈哈其實就是些小毛病，修一下效果就很不錯了。 希望不要降到關鍵零件哈哈哈哈

[@aaron4820]

A 4uad production level video on VFC vs dNa someday hopefully

[@4UADSmartAirsoft]

XD

[@aaron4820]

@@4UADSmartAirsoft doooooooooo it

[@passerirc]

OMG Dude you are sooooo Detail! Love u guys!

[@4UADSmartAirsoft]

Glad we helped! And thanks for the support!!!

[@the_airsoft_corner]

The problem with VFC ARs is they are made for over joule market and for use with heavy bbs. I used different versions and they all performed bad shooting at 1J with 0.30g bbs. No mattered what bucking, hop arm or nozzle i was using. For those powers the solution is a TM MWS with just an NPAS for reducing power

[@4UADSmartAirsoft]

Hummmm interesting, have you tried to decrease the contact surface on the hop up arm, I think it will improve quite abit

[@the_airsoft_corner]

@@4UADSmartAirsoft nope, i sold my VFC for a TM. But i will give it a try..

[@KrasniyByk]

Meanwhile in Russia we usually have 2.25j limit for automatic replicas and 3J for semi-auto snipers 💀

[@baej4769]

To start things off. I love what your doing for the airsoft community, liked the video as well. If they were to prolong the QC process before getting these out to the consumers, we wouldn’t need to wait for the next “version 3 or 4” to come out just to recommend their products after “finetuning”. Add that to their inability to get their AR’s stateside to US airsoft distributors. Because of this, there are only 2 reasons people buy VFC AR gbbrs in the US. 1. They want a certain look otb without changing out externals. 2. They brag about their toy’s real steel compatibility (i.e my toy is better than yours)

[@4UADSmartAirsoft]

Well I think this comment is good once they see it I’m sure they will find ways to improve it

[@_Kirsche]

but my toy is better than yours :(

[@FishFish2020tw]

MCMR的下壓點一定要修，瓦斯管下方連接位置鑽洞鎖螺絲可以讓hop更穩定不會亂跳，每一把MCMR的ＨＯＰ螺絲鬆緊度都不同，我的就一開始就很鬆，VFC品管這點上細節應該要留意一下😊調整桿螺紋上中強度螺絲膠配合鎖點固定 hop非常穩定；改裝部分我使用獨角獸精密管+80度 hop皮＋.32ＢＢ，射程80米又直又遠….我是找TAF幫我改的，有興趣的人可以找他們處理

[@4UADSmartAirsoft]

TAF 這塊是真專業

[@FishFish2020tw]

@@4UADSmartAirsoft 我也很喜歡你的影片，專業又很注重細節，有些影片一開始的微電影也非常有趣👍🎉

[@jordyjay4636]

Awesome review! Does the hop up modification also work with other buckings/nubs?

[@4UADSmartAirsoft]

Yep this method will work on all buckings!

[@arkliuchannel2913]

這企劃真的很猛，一小時真的不簡單!

[@4UADSmartAirsoft]

很多槍~不如一次講完 XD

[@KrITIK4L]

That replica was overhoping 0.43 at 30m, that's a hard hop! Anyway... this sound like some new improved parts for the VFC GBBR's are coming from you guys? :D

[@4UADSmartAirsoft]

Stay tuned haha

[@K0n3ro]

@@4UADSmartAirsoftI really hope to get a hop up chamber for my BCM MCMR from your brand guys 🥹 thank you for this video !

[@onion0617]

57分鐘 非常好長片 支持❤

[@4UADSmartAirsoft]

我以為大家會覺得太長XD 哈哈哈哈

[@ipyonl]

I just saw the VFC review video, actually the hop-up of the VFC is "structures with severe up and down deviations and can't hold left and right". Most people try to solve this problem with MAPLE LEAF Chamber GHK/VFC Alternatively, use the TNT chamber. And there's wrong with the VFC gun sometimes. Working on countless VFC ARs (almost 50 to 100) The floating valve of the VFC is stuck inside the nozzles due to tolerance, and inside nozzle, silver part in the middle is not fixed, so the position is free-spirited and the speed of the bullet is severe. (actually, that problem percent is 3%. 25~30 per 1 now, but, until 2022 vfc product have this problem often. almost 30%. bruh :v) This is detailed on the airsix KZbin in Korea. So I did this and stabilized the bullet velocity, but at the same time, I managed to secure a hit rate for 0.2g by using the option chamber, option hop up rubber (unicorn hop up rubber). But also at 330-350fps, I only managed to secure a stable hit rate of 15-20m and over 20-25m was very difficult. I don't think 30m would be possible with a 0.2g limit... I hope your hop-up chamber will shine Thank you for producing a good quality video.

[@fanyea8905]

我自己是拿VFC T91 （雖然沒有在這次的測評中） 之前真的沒什麼在玩VFC的長槍 但在場上看過真的斷槍身的案例 VFC T91有個好氣又好笑的點 他一樣身為AR系列，但很多東西都跟M4他們不通是特歸 （槍機那個算細節還好，槍托那個特歸真的讓人好氣又好笑） 但同時也說明了他要另外開一個模 （更不提他槍身為了避免被誤會做了一點點手腳） 整體下來真的是台灣國內跟Ob 有的比的一把T91 但性能上卻大於ob許多

[@4UADSmartAirsoft]

整體上我覺得還是進不了不少了哈哈希望能持續進步

[@fanyea8905]

@@4UADSmartAirsoft 有聽說T91是一個分水嶺，朋友一直叫我把KWA LM4D換成91來用

[@tn19941004]

近期收了一把VFC的416A5 V3，原因無他：GHK沒出，KWA不更新，他廠套件有夠貴 不過畢竟是拿來當裝飾品，準度什麼的就算了QQ，有機會再按照應片說明處理看看 有關超強螺絲膠的部分你確定他沒有繼續用嗎，我那個尾托轉出來整個螺牙都是殘膠= = 話又說回來平平都是V3，GHK的就是比較大碗 再換上CO2匣後體驗直接提升到另一個境界了

[@ΑλέξανδροςΧουιαζης]

Wait 0.43 gr bbs for assualt rifles is common is taiwan? Here in eu we use .28 - .32s How??

[@4UADSmartAirsoft]

different places use different bbs haha like in Japan the heaviest BB they use was 0.28g and 0.28g here in Taiwan sometime is a bit too light for pistols :D

[@Fnddr]

I was hoping to see what mods you would do in order to fit your 4uad bucking and nub. Has anyone tried to fit their bucking and nub? Or can you use the bucking only without the nub on a v3 hop assembly on a vfc?

[@4UADSmartAirsoft]

You can use it without the nub, sometimes nub isn't the best

[@andychu8750]

2011年第一版416玩家明白那時的fire pin spring有多爛, 目前已改V3 fire control 加上GHK快調 hop up良好運作中

[@4UADSmartAirsoft]

對阿那年真的嚇死很多人XD

[@VMTKV1]

I will look into the VFC VMAG V3. Thank you.

[@4UADSmartAirsoft]

Good luck

[@m1m16a6y]

我兩個月前也入手VFC MCMR 8.5吋 也是遇到像影片中 彈道上下震幅很大 花了一筆錢把他改好QQ 這把真的做得很有質感 8.5吋真的是極品 是我第二隻VFC的槍 希望廠商能夠正視後定常失效的問題 我都自己買了好幾個備用起來換了QQ 深怕下場破壞遊戲體驗... 影片很棒 最近看了好幾部跟VFC相關的介紹 讓我對VFC都重拾信心了XD

[@4UADSmartAirsoft]

其實玩具槍都是製這樣XD 小修一些地方就會變得很不錯了 祝好運啦

[@mountainadventures7346]

I have the XM177. Mags are a pain to find. I can get TM MWS mags no problem on eBay.🤷‍♂️

[@4UADSmartAirsoft]

I’m differ t parts of the world Vfc parts can be a pain to get

[@n8taing612]

Would you also recommend chamfering the nozzle like you did in your friction pro bucking video? Or is shaving the hop arm better?

[@4UADSmartAirsoft]

Nope not anymore I think the setting right now is pretty good just mod the hop up arm and you are good to go

[@CamouflageGaming-j7w]

Hey! What would you recommend for a GBBR Tokyo Marui MWS or a VFC AR V3 specifically the car 15 one you showed

[@4UADSmartAirsoft]

It really depends on what you want and where you live if you live in a really cold place maybe MWS is the way to go, but the trigger feels really shitty..... and VFC had some awesome spring and mechanical feels, and if you live in a hot place you will like VFC, and don't forget to mod the arm a little bit XD

[@卓庭宇]

作為416A5 v2跟v3的玩家，VFC的改進是有目共睹，但是彈道永遠沒轍，.36BB彈可以在30公尺上下跳，即使花了好多改件去換，效果也是差強人意，不過這影片或許可以回去試試，看看我那孩子能不有所起色。

[@4UADSmartAirsoft]

試一下~效果會好很多:DD

[@Colt.trautmanairsoft-cb9fi]

Can t m16 vfc or xm148 grenade launcher also got equalbrium beretta

[@NeoMartel]

My issue with VFC v3 rifles, is weak nozzle spring. They are not durable, and always broke. Someon have idea what best nozzle for VFC v3 rifles?

[@Colt.trautmanairsoft-cb9fi]

M16 a1 i like aswel

[@海星-d8k]

Bro, my VFC M16A1's solar ring won't come off. How did you get it off? I'm here begging for guidance. 唉，我手都拆伤了，难道得上台钳吗？

[@4UADSmartAirsoft]

熱風槍還有你會需要一根AR多功能板手

[@TERRY-dp5ps]

Are you planning on releasing an improved hop-up arm product?

[@4UADSmartAirsoft]

Stay tuned

[@cipherkok]

小賴哥，辛苦了，一次開箱了那麼多隻vfc ar平衡對比!🎉 影片很好，給個讚支持！！👍 但下次弄槍拍片也要小心，看到您52分那裡好像刮傷了手😢😅 個人建議有空可以企劃拍攝一下apfg的mcx系統，那也是一個用v3的好系統！我有擁有。 (v*c 雖然它們不講，但誰都知道是誰出😂）

[@4UADSmartAirsoft]

哈哈哈謝謝關心~很感心~~ APFG 那隻MCX 我確實挺想來研究一下的

[@Colt.trautmanairsoft-cb9fi]

Vfc should make new alien s Pulse rifle in gbbr from alien rhomulas based tk45 gng

[@hrldp4394]

Vfc gbbr are good but not out of the box. my 416 v3 had her stock broken after first play, the hop-up barrel was changed as well. I have no issue with the magazines, but have to shave a little the "firing pin" side by side. Accu wedge are gold if you don't want the wobbles. Surprisingly, i am far more happy with my UMP 9. @airsoft-chay made a tutorial for make it fire the real ROF. More than happy than i know the real weapon. Only complaint: the real have polymer mags. I have the G3 but i don't test it for the moment. I just put real steal part on it. It's a very beautifull rifle My tought is that the VFC G36 is probably better than theire AR, even if i love the KAC

[@4UADSmartAirsoft]

That’s actually quite a surprise…. I did heard people were really upset with the ump and yet it’s actually the one you are happy with haha. But yah the funny thing about airsoft guns is that despite the 2 guns look exactly the same their performance can be 2 different world due to production qc

[@hrldp4394]

Well it's the same, the ump is good but not out of the box. This is "2015-ish' vfc, the joint and barrel was crap, there was no npas. And the ROF was far too high causing breakage I shave up the hammer, enlab the false buffer on the recoil spring, replace it by a real one, i switch for a crazy jet barrel and a joint mapple leaf. Guillautine airsoft have made steel outer barrel for it and npas, so î order it. Now this is far more realistic, and, as i hold real UMP 9 i can say the weight i the same make it a perfect "PTW" for me xD Only complaint: on the RS ump9 the magazine is on polymer, not in the vfc, and there is frixion when you have to put it out of the magwell

[@chunhao1003]

I love the laugh at 32:32 , it’s great~~~🤣🤣🤣

[@4UADSmartAirsoft]

Hahahaha

[@waikitchung-u8b]

求GHK V3的準確性測試，更重點的求試VFC與GHK甚至老WA的上下身能否交換使用

[@4UADSmartAirsoft]

我還真沒wa 呢

[@mariadelcarmenruiz2260]

Y’all should test the double eagle noveske n4 Mws clone

[@4UADSmartAirsoft]

Will see if we can get our hands on one

[@雪狐-z2t]

不知道下次會不會測試GHK M4 V3 DD

[@4UADSmartAirsoft]

一定要的啊～～～

[@user-HighVoltage]

期待做一期GHK DD PDW

[@4UADSmartAirsoft]

GHK系列製作中

[@Colt.trautmanairsoft-cb9fi]

Saw alien rhomulas 4 times in uk make vid alien Pulse rifle

[@生活在地中海的企鵝]

VFC現在大概要做的事情，就是把他的漆面、後定處理好，在售後服務的部分更加完美，大概就是一把完美的槍。 一把賣到1萬-1萬5，如果輕輕碰一下就掉漆，後定莫名失效，我相信一般玩家都會覺得很難受。

[@jordijude]

這個問題廠方根本沒有正視過。

[@生活在地中海的企鵝]

@@jordijude 那確實，根本沒改過，原本以為V3系統的後定會好一點，結果還是一樣😆 但至少公差不錯啦，比某家貴鬆鬆，但公差差到靠北的還要好。

[@易展字]

你們484沒有體驗過我們牌的漆面才會說VFC漆面一碰就掉

[@生活在地中海的企鵝]

@@易展字 WE的話，他的漆面⋯⋯嗯⋯⋯對⋯⋯ 不討論是因為他跟VFC和GHK不在同一個等級上😆

[@易展字]

笑死 壁癌漆面 曾經擁有過V1版海陸刻字的GHK M4 那個漆面的確厚實 做舊化用菜瓜布尻完 肉眼可見的厚

[@RetroWorld8]

What mount is that on the XM177? That mount between the front sight?

[@4UADSmartAirsoft]

oh is an old barrel rail clip that I modified so the light goes on

[@mrsherman5012]

for some reason my m16a1 wont work properly with the 30rn mags but works fine with the 20rn. found out its something with the lover (i am getting a new one from redwolf cuz there was another problem with it) but still nice gun also got the 733 cuz i remeber seeing it from a vid you guys made and black hawk down

[@4UADSmartAirsoft]

I think it’s the mag sanding problem, basically if the mag catch was sand to different height. If you get a chance to purchase the t91 mag those will be the ones that are problem free

[@mrsherman5012]

@@4UADSmartAirsoft that might be the case still really odd tho cuz the mag work fine in every other gun like my urgi (made it to a block 2 m4) and the 733. and would not the new m16a2 mags also fix it cuz the catch is on the head insted on the mag itself?

[@zigun9989]

VFC近期出的m16系列外观都很考究，但唯一不明白的是为啥30发弹匣形状严重失真。既然已经花功夫还原枪体外观了，为啥唯独弹匣不能改好点

[@4UADSmartAirsoft]

那個彈匣確實可以再做的好看一點

[@WaLdgeiSt_]

0,43g bb´s sound-excessive. How much are you paying for them? I am using 0,30g bb´s, at most 0,32g bb´s(for aeg that is). Cost for 0,43g bb´s is alot higher. Not fielded thus far my vfc gas rifles. Very interesting and in-depth video! €: also, the hopup adjustment on both rifles of mines is not moving at all. Not sure if that eases with use but right now, it is virtually unusable.

[@4UADSmartAirsoft]

yah man the one you have must be the batch that had the larger o ring, which made it not adjustable at all..... in your case I would recommend switching to a smaller tension o ring, this way your hop up unit is actually adjustable, and I highly recommend you to fine tune the hop up arm contact surface it will give you some very nice results with 0.32g. And finally since I don't shoot in a game as often I go with the bb that's pricier but more wind resistant. Hope this helps in some ways

[@WaLdgeiSt_]

@@4UADSmartAirsoft Makes perfect sense regarding bb weight and less shoots with it. And thanks alot for the tip regarding the hop up, it left me quite irritated since it did not feel designed tight like the handguard spring(for which there is a handguard tool to easily work with) but not good defect tight/stuck. Manual and videos just mentioned to easily adjust it under the handguards. Is a switch of the o ring an easy thing? Never worked with it thus far and not much any airsoft tech either.

[@KaysAirsoft]

Hello an greatings from germany. please tell more about your tuned xm177 gbbr. i have the m733 gbbr. :-) nice video!

[@4UADSmartAirsoft]

haha what more would you like to know

[@KaysAirsoft]

@@4UADSmartAirsoft in your YT Video you said that you have done some special tunings for your xm177. have you drilled a hole in the handguard to adjust the hopup? And i‘m interested in the paintjob. 😁

[@bmwm5gtr1]

請問 你們會出VFC的改套件 嗎

[@4UADSmartAirsoft]

錢包君準備好

[@RemcovanR]

What's the bolt action rifle shown during the intro?

[@4UADSmartAirsoft]

It’s a maple leaf product, that’s the upper bolt action receiver. And it’s fun as hell

[@White_sox_boy]

HEY Andrew, will u test the GHK V3 ?

[@4UADSmartAirsoft]

Yes we will

[@Colt.trautmanairsoft-cb9fi]

Nice combo

[@JaxMV]

How is the accuracy of vfc bcm mcmr out of the box? Is it steel internals?

[@4UADSmartAirsoft]

its needed some fixes to shoot lasers

[@JaxMV]

@@4UADSmartAirsoft Can a TM MWS M4 shoot 550fps with NPAS?

[@小陳-x7n]

想看ghk urgi v2上去試一下😂

[@4UADSmartAirsoft]

這我可以試試

[@日落-z9n]

vfc ar玩時間長了上機匣後面小耳朵會斷嗎？

[@Colt.trautmanairsoft-cb9fi]

.43g n. 45g now

[@Colt.trautmanairsoft-cb9fi]

Stil wait for uzi pro from northeast airsoft

[@dca224]

期待你們拍一部GHK AR值不值得買

[@k5r297]

你可以想想看GHK有什麼VFC沒有的 我現在只想的到鋼外管 鋼槍機框(但V更便宜) 稍微好一點的彈匣設計(外觀不算 GMAG偏醜)

[@易展字]

GHK大量鋼鋼好 擊錘90度 但你有手汗的話你會很想重新投胎 手最常摸的彈匣也是鋼殼 雖然有防鏽處理但天敵就是天敵 時間問題而已 看到上面一堆紅點點又搓不掉真的很爆氣

[@4UADSmartAirsoft]

拍攝中等我們一下

[@tra6301]

求GHK M4 V3測試和開箱

[@許家誠-w6f]

+1

[@sumkeungtsoi7009]

今天用GHK ddm4 pdw 下場，感覺非常好，爽直遠！ 後定沒有失效，後座力真是比以往的大，而且非常爽 。今天打了500-600發，就後定片有些少耗損

[@4UADSmartAirsoft]

拍攝中～～～

[@阿瑞-n5z]

@@sumkeungtsoi7009 我也有買一把可是還沒下場 沒時間玩....上一把還是用kwa ar-15的我，GHK DDM4真的讓我很驚艷，瞬間感覺KWA AR15好垃圾

[@sumkeungtsoi7009]

手感真的很好，在香港打CQB真是一流！

[@Colt.trautmanairsoft-cb9fi]

Got street sweeten shotgun n new 44 nagnumairsoft revolver silver n another Gng bullpump shotgun aeg m4 mags n gas

[@ctony6102]

什麼時候有ghk AR 評測

[@4UADSmartAirsoft]

快了快了

[@Colt.trautmanairsoft-cb9fi]

Cool

[@Nicolas-bo9ps]

請教一下小賴，我的vfc m18，在彈夾裝入BB彈打後座力變得很小，沒裝BB的時候後座力反倒是超級大（導致正常打完BB彈後不能空掛，要再補一下空槍才能完整回膛空掛）問了很多人都沒辦法解決😢請問你有遇到這種情況嗎？

[@4UADSmartAirsoft]

這個應該是他的彈匣和飛機切氣口的接觸有出現隙縫 你可以拍個影片來我們粉專我幫你隔空抓藥一下

[@firestarter5205]

1:32 bros not even looking thru the sight

[@4UADSmartAirsoft]

Aim bot 2.0

[@petroska1213]

BCM MCMR i have one and this replica have biiig problem with weak hop up Arm .... put there TNT hopup and it will fly like a laser (i have 11.5inch and im shooting 0.40 at 90meters)

[@MidWestJigga]

I had an issues and it turned out to be the two piece outer barrel at the connection being loose and having play in and out of the gun where it affected the hop contact one shot hoping the next not and the one after that over hopping I jb welded them together and shoots beams like you said .40 out to 90 meters without hop being turned all the way to max even

[@petroska1213]

@@MidWestJigga when i bought hopup unit its true that i bought inner barrel too so i didnt run into this problem thanks for adding this :)

[@DragonNectar]

@@petroska1213 I heard that TNT doesn't accept other barrels. Is that true?

[@petroska1213]

@@DragonNectar i dont know i have crazy jet there

[@zhanchen6408]

I used the TNT kit and the hop up is gone. The original hop up is just as bad.

[@CaptainFAL]

20 inch barrel is what God and Eugene Stoner intended

[@4UADSmartAirsoft]

Haha

[@FD5201]

啊？！ 那個栓動AR是什麼型號！！

[@Colt.trautmanairsoft-cb9fi]

Get saiga drum from itv. Yor true

[@x.r5958]

從V3系統推出陸續入手，手上最久的也有2年多了，除了飛機彈簧壽命到斷裂之外其餘都還頭好壯壯～另外可以請教您的xm177鏡橋魚骨的固定方式嗎？我的要額外墊電火布才不會左右搖晃動…

[@James-rd1se]

我的鏡橋魚骨有m2紅點那款和只適用T2的，vfc後座強容易震鬆，我是噴黑螺絲墊片然後夾在中間，這樣除了固定外還可以增加空位讓我能看到機瞄（之前扭緊螺絲會擋住前準星） 當然你不會拆的話可以直接上螺絲膠

[@4UADSmartAirsoft]

那可能得換個規格了，我的鎖就不會晃，要不試試螺絲滑司也會有效果

[@x.r5958]

@@4UADSmartAirsoft 好的瞭解～

[@x.r5958]

@@James-rd1se ok謝謝建議

[@Fish10126]

求vfc 416測試

[@Colt.trautmanairsoft-cb9fi]

I got over 450 boxes

[@Colt.trautmanairsoft-cb9fi]

Like to c ak 9mm gbbr

[@Colt.trautmanairsoft-cb9fi]

If like a gun i save n buy it

[@易展字]

原來不是只有我彈道上上下下 比較快樂一點了

[@4UADSmartAirsoft]

壓桿修一下就不會上上下下囉

[@rstv3080]

@@4UADSmartAirsoft出掉了2把Vfc 始終找不到彈道上下的問題點，今天終於讓你點破了😂

[@rabbitpeter869]

❤❤❤❤❤

[@fafb03]

自從買了"初代" VFC 41614.5、10.5、416C、UMP.45、UMP9後，大概只剩下他們家的電動長槍&GBB手槍能勾起我的興趣~

[@4UADSmartAirsoft]

看了哥以上買過的槍也難怪你不會再買Vfc 了XD 都是黑歷史系列的是要怎麼喜歡辣哈哈哈

[@fafb03]

@@4UADSmartAirsoft 不是不會買~ 是要看他的款式有沒有電槍的版本，而且買他們家的長槍GBB還要考慮到後勤維護的"便利性"，一個零件等半年以上不然就是還要多花錢買鋼製品，那不如買ESD的ER-15 GBB可能還比較好~ 🧐🧐🧐

[@Colt.trautmanairsoft-cb9fi]

Silly weather in uk again

[@deusvult7721]

Why does the chrono read 0.74j if you shoot a 0.2g projectile at 100m/s? It should be 1J...

[@BewilderedDuck-e5l]

And why test a GBBR (or any airsoft gun) with 0.20g?! You are never going to get consistent results plus gas guns have Joule creep when you then use heavier ammo

[@Colt.trautmanairsoft-cb9fi]

Like ak 47 from vfc

[@Colt.trautmanairsoft-cb9fi]

Like to revolver with recoil

[@jjsgame7683]

初速我遇過都是越打越微微的下降，怎麼都是越打越高? 更別說那高高低低的彈道....所以別人說VFC彈道多好我實在都不信，包含我自己使用經驗也一致

[@4UADSmartAirsoft]

小微調一下就雷射槍了

[@陳奕仲-m2m]

我想請問尿彈跟暴衝彈的部分要怎麼解決？

[@pcgw]

想不到有人發現到, 很多人將價就貨把這問題無視掉 香港一名玩家發現到這個問題並且修正 當然是要求很高的加工技巧

[@4UADSmartAirsoft]

影片裡修壓桿就ok囉

[@Colt.trautmanairsoft-cb9fi]

Make hpa ak less than 500 quid uk did all work most my self uk got hpa eng jus wait put in

[@Colt.trautmanairsoft-cb9fi]

Like c vorsk make mac10 gbb

[@easyice544]

May i request to review a new w.e. m4 ris or m4a1 version 3 and compare it to previous version which is v2. Thanks.

[@4UADSmartAirsoft]

Let us see what we can do

[@MidWestJigga]

Thank you fellas I hope vfc sees this and starts making better hop arms for us consumers to buy or you fellas make one and ill buy em from you lol

[@4UADSmartAirsoft]

Stay tuned bro!

[@MidWestJigga]

@@4UADSmartAirsoft my mafukin dudes 💪💪💪💪

[@greenlightforce]

@@4UADSmartAirsoft Nice work Andrew! If you have an accurate machined, I'd buy that right away. When can we expect it?

[@556nato_negev]

aww no cat in vid this time

[@4UADSmartAirsoft]

除非在家裡拍不然貓貓是不會出現了XD

[@556nato_negev]

@@4UADSmartAirsoft 也是 不然帶去廠區跑走了就不好了

[@Colt.trautmanairsoft-cb9fi]

G3 with 6 shotgun grenade launcher fake knife mission in action3 braddock chuck norris

[@Abel-pi9zb]

So... You are telling me that I have to pay $700 or even $1000 bucks for a gun to help a company to learn about how to make a product? no dude, that is not how a product work. Imagine being a beta tester without knowing it and paying ridiculous amounts of money for being it. VFC have one main problem, they releases SOOO many models and platforms that they can´t be good at all of them, marui for example releases very little products and variants but you know they will work well (even though they are not a good example)

[@4UADSmartAirsoft]

Ok, perhaps you can ace all that in one shot :)

[@MinamiX3]

41:54 Correction that is called the cock ring that holds the bucking together. 🐓

[@4UADSmartAirsoft]

lesson learned

[@1593.1-u]

我有一隻VFC的SCAR，不是很懂跪求指教感謝

[@陳運生-j4r]

彈道很飄

[@1593.1-u]

@@陳運生-j4r 原來不是錯覺? 我也經常覺得有點飄 要改HOP皮? 還是單純用重彈就好?

[@陳運生-j4r]

@@1593.1-u 是hop座本身晃動的問題 比較舊版本的槍都這樣（UMP也是）...

[@生活在地中海的企鵝]

@@1593.1-u 建議賣掉吧，朋友的Scar好像挺容易故障的

[@pcgw]

@@1593.1-u 換零件的話再改也沒用,因為是嚴重公差問題 香港有一名玩家解決了這個問題