/ war_p8nt Decided to replace the Carven muffler with a Borla XR-1 40085. Sounds almost the same, lol. I'll be adding an electric cutout very soon though.
Пікірлер: 233
@DDstreamz3 жыл бұрын
best sounding sierra on youtube. I've been revisiting this post the past few years. i always told myself when i finally pull the trigger on build my 06 rcsb, i want it to sound like this. Finally pulled the trigger a few weeks ago and ordered some parts: BTR stage 3 v2 cam ls6 springs/rods Melling lifters taylor 8mm plug wires standard vol. / high pressure oil pump tru-cool 40k trans cooler 3200 stall TBSS 92MM intake manifold TBSS 92MM TB Speed Engineering LT headers 3in exhaust / borla xr1 / 4 in dynomax tip
@TheMjoacim3 жыл бұрын
Telecom Matty awesome!!! Enjoy it, man!!!
@DDstreamz3 жыл бұрын
Standby To Get Some Thanks brotha, plan on posting any update videos? Would like to see where it’s at now or see some pulls
@Rauljrv2 жыл бұрын
Do you have any sound clips ?
@Dirtymax_Danimal7 жыл бұрын
Any one else notice that it looked like Honest Abe started the truck from in the garage? Lol
@TheMjoacim7 жыл бұрын
Bay Area Danimal lol that's actually a picture of Clint Eastwood from Dirty Harry where he's got the .44 pointed at the guy. It's from a perspective almost like it's pointed at you.
@erick._1503 жыл бұрын
Sounds good I just hate that “hiss” sound that these trucks give sometimes. Maybe pipes running out the back will fix that? Looking for a deep mellow tone
@altlp235 жыл бұрын
Love the truck I'll be swapping my muffler soon to the xr1 I have an 08 with the same cam and I love it
@MrElPoderozo17 жыл бұрын
I think im in love with your truck! I promise to take good care of her and that she will be in excellent care for the rest of her life. She will be provided everything that she would ever need. With all that said I am asking to marry her 😂😂😂😂😂😂😂😂😂😂😂😂😂😂. Seriously! The truck sounds amazing! I can only hope that when I finish my truck it will sound this good,thanks for sharing 👍🇺🇸.
Standby To Get Some is this just one 3" borla xr 1
@andrewg7617 жыл бұрын
definitely need more videos of this truck man
@Marcos_reyna6 жыл бұрын
I love your truck as far as stance,performance, and style if it was for sale,i would consider buying it. I was in ls scene a while back but lost interest and went with a ram diesel truck, but now considering getting me a weekend toy.
@miguelalcala61157 жыл бұрын
Man, i cant stop watching this gorgeous truck lol
@TheMjoacim7 жыл бұрын
Miguel Alcala lol thanks man.
@hidros14615 жыл бұрын
I'm not a GM guy but this thing is a beast! Great job
@TheMjoacim5 жыл бұрын
Thank you so much!!
@OutlawChevy22 жыл бұрын
Sounds super clean!
@jeffpowell21217 жыл бұрын
thanks man...that truck made my day....now i really wanna redo mine...
@TheMjoacim7 жыл бұрын
Jeff Powell get after it!!! Let me know if you have any questions. I'll be doing some pull videos and some in depth detail videos when I do the blower install in the coming weeks.
@jeffpowell21217 жыл бұрын
yup...ill be watching...
@voodooseven90267 жыл бұрын
You're killing me, man! I want this truck. But never.... EVER sell it. :)
@TheMjoacim7 жыл бұрын
Alex Duncan thanks brother, lol.
@mustangmunoz86 жыл бұрын
Sounds really nice. Just got an 02' sierra short bed myself. Which headers did you go with??
@onewheelup7 жыл бұрын
yea I'm trying to see if the sound I'm looking for comes from running the tips out the side preferably in front of the rear tires,i have 9 inches of lift,so clearance is ok,but the gas tank is there,I'm going to call borla and ask,because i don't want the WOOMP WOOMP WOOMP sound,I'm after the snap crackle pop sound known for being borla and i think its going to have to be out the side you know what i mean,funny thing is all the cammed chevy videos are here in texas haha we love our cammed chevys huh.long story short back in the day,i had a 96 blck ext/cab s-10 with a 96 Vette engine and i had flow master dummy me,i always thought that borla was for cars and the first ones i saw it on were the LS1 camaro's and Transams ya know,i never even thought to put borla i wish i would have,that truck hauled ass big time.i miss it.oh well so I'm going to order two borla XR-1's off amazon i guess there oval and try to run them out the sides.take it easy bro.listen to my truck video if you want.later its got the flows on it now.ughh lol
@brandonandjack81486 жыл бұрын
It looks bad ass and sounds badass to
@1980fields Жыл бұрын
Beautiful truck man. What size tires you running?
@TheMjoacim Жыл бұрын
Sorry for the delay. Thanks you!! They’re 275/40/20.
@1980fields Жыл бұрын
I really appreciate it. I have the same wheels and taking my Cosmis wheels off and putting those on. I have the same size tires as you so I’m glad. Do you have a 4/6 drop or 5/7?
@chrisbetea39586 жыл бұрын
Nice rims on the escalade, have the same ones on my dropped '06 Trailblazer..
@classichamhtx5 жыл бұрын
Sounds good 👌🏽
@TheMjoacim5 жыл бұрын
Thanks!!
@tcwest835 жыл бұрын
Very nice. Texas is a huge state but who did your engine work? Im about to buy a 94 OBS chevy single cab stepside that has a 350 and I want it to sound similar.. maybe a tad more lumpy.
@jackmerkle5 жыл бұрын
I know this is kinds late bit you're gonna want to replace all the TBI stuff with a carb.
@juniorls26354 жыл бұрын
bad ass truck man🔥 what size tire you have on those 20s?
@mirabalmedia4 жыл бұрын
I seen on a older post that he has 275/40/20
@mirabalmedia4 жыл бұрын
Junior Barrera I have a 2000 Silverado that I been slowly fixing up. I have a set of 2017 GMC Sierra 20” that I’m going to run 275/45/20.
@juniorls26354 жыл бұрын
MirabalMedia nice man i got a 2002 gmc stepside with the same rims you said front tires are 275/40/r20 and back are 315/35/r20 looks pretty nice in my opinion
@mirabalmedia4 жыл бұрын
I changed out my whole interior to light gray with a center console out of a 03-06 Tahoe & the a-pillar from a tahoe with the Bose tweeter. I have a 4.8 in it but I also have a 6.0 block as well. I brought a BTR stage 2 truck cam, BTR pushrods, BTR valve springs, Corvette servo. I just had my heads rebuild with new valves. I haven’t installed all of that yet. I’m debating should I put it in my 4.8 or in my 6.0. Reasons why the 6.0 is going to waste a lot of gas.
@Mjb3177 жыл бұрын
Sounds amazing!
@fernypaletas71485 жыл бұрын
Do more videos of this truck bro🔥💯
@montess34857 жыл бұрын
truck is nice as hell! what size cam you have in that beast?
@TheMjoacim7 жыл бұрын
monte ss thanks brother!!! It's a Brian Tooley Racing Stage 4 truck cam (224/230 .553/.547 111+2).
@MrGrzmnky7 жыл бұрын
what size converter
@TheMjoacim7 жыл бұрын
It's a Circle D 3200.
@deathf55 жыл бұрын
Standby To Get Some how to does the cam match up with your 3200 stall. I have a fbo ext cab with 3.73 and same stall and planning to add the cam
@betosgarage5 жыл бұрын
Sounds good
@kyle2000gt6 жыл бұрын
What tailgate spoiler is that? Looks and sounds great man
@TheMjoacim6 жыл бұрын
Thank you very much!!!! It's actually the factory tailgate spoiler. Maybe the angle makes it look more aggressive?
@XeDubzy7 жыл бұрын
Music to my ears!
@adrianromero53146 жыл бұрын
Clean build man. You mind telling me what drop you have?
@TheMjoacim6 жыл бұрын
Thanks man!! It's a 5/7. 1" springs, 2" control arms and 2" spindles. Flip kit in the rear and an adjustable rear shackle.
@juniormedina25174 жыл бұрын
So what is the complete exhaust set up bro looking to get this type of sound on my 5.3 nnbs
@TheMjoacim4 жыл бұрын
Zion Medina Texas Speed stainless 1-3/4 long tube headers, 3” catless y-pipe into 3” pipe to the Borla XR1 muffler and 3” pipe to single side exit.
@kryptog13764 жыл бұрын
Could you do a video of you doing driving the truck and maybe do sone pulls to hear how the exhaust sounds at higher speeds?
@chitoaguilar71136 жыл бұрын
Love it bro
@DangerDavefpv7 жыл бұрын
badass sierra,sounds awesome
@TheMjoacim7 жыл бұрын
David Downs thank you!!!!
@TheACCENT27 жыл бұрын
Clean ass build man
@czgl83137 жыл бұрын
you need to upload some pulls in that beast man, sounds mean
@TheMjoacim7 жыл бұрын
little bearbear that's the plan this weekend, brother. We've been having some sketchy weather lately, but it's good to go this weekend.
@tyejohnson83697 жыл бұрын
is your borla straight out or turn down? nice truck man
@TheMjoacim7 жыл бұрын
Tye Johnson it has one 3" pipe running back and dumped just behind the passenger rear tire.
@benjaminor4087 жыл бұрын
Nice truck... What cowl hood do you have on it? I've been seen a few on summit but I don't know which one to go for.. Yours looks nice.
@TheMjoacim7 жыл бұрын
Benjamin Ortega thank you. It's been a long time since I bought it, but I believe it's a Suncoast. It's all steel.
@tleyba98817 жыл бұрын
Standby To Get Some what size tire and rim
@TheMjoacim7 жыл бұрын
first name last name stock 20x8's and 275/40's.
@benjaminor4087 жыл бұрын
Thanks for letting me know buddy. I appreciate it
@erickgarza72783 жыл бұрын
What rear tire size? Any rubbing on the fender Im 6/8 drop also on stepside and started rubbing when I went from a 245 to 275/40/20
@darioe98017 жыл бұрын
Ive been looking for headlights like your but all the ones i find are cheap and flimsy could you please tell me where you got yours from? Thanks .
@adrianrodriguez77874 жыл бұрын
Sounds aggressive. Was thinking of changing out my borla pro xs for one of these. I’m convinced now. I have the btr cam as well but a stage 3😒
@TheMjoacim4 жыл бұрын
Adrian Rodriguez stage 3 is plenty lumpy though.
@TheDevilsShadow7207 жыл бұрын
I Digg it man what drop do you have if you dont mind me asking?
@TheMjoacim7 жыл бұрын
TheDevilsShadow720 thanks brother. It's a 6/8 achieved with springs, spindles and lower control arms up front and a flip kit, drop shackles and notched frame in the rear.
@jasonhake27816 жыл бұрын
Who did your tune? Sounds like a 🚂, love the the truck though. Want to sell it? How many miles does it have?
@TheMjoacim6 жыл бұрын
Jason Hake a local guy by he name of John’s LSX Tuning. Does a great job and is mobile if need be. I’m afraid it’s not for sale. At the time of this video it had 116k miles on it.
@loscar5oh5 жыл бұрын
@@TheMjoacim is this tuner located near Dallas?
@countryass78605 жыл бұрын
@@loscar5oh go to jrx tuning he is in fort worth best one in dfw
@javierfuentes77766 жыл бұрын
What kind of exhaust tips did you use man ? I love how it sounds
@TheMjoacim6 жыл бұрын
It actually doesn't technically have tips anymore, it's the 3" pipe all the way back to the corner behind the back passenger side tire.
@javierfuentes77766 жыл бұрын
So a 3 inch pipe right and you still have the same cam size man I love how it sounds 👌🏻
@TheMjoacim6 жыл бұрын
Javier Fuentes Correct.
@mikesanto697 жыл бұрын
What size are those Wheels on the pick up and are there any spacers and what did they come off of maybe it's the lowering kit but they almost look like 22s but I could be wrong, could be 20".... hard to tell when it's lowered than much
@TheMjoacim7 жыл бұрын
LSX KING they're stock 20's from an 08 Yukon. No spacers. 275/45 tires.
@ej10254 жыл бұрын
This might be a little late, but what Carven muffler did you have before?
@TheMjoacim4 жыл бұрын
EJ102 the Carven R.
@ej10254 жыл бұрын
@@TheMjoacim Yeah, that one is loud. Just deciding if I should get the XR-1 or Carven TR is all.
@erick._1503 жыл бұрын
@@ej1025 so I see you went with Borla? i am also debating between those 2 mufflers
@ej10253 жыл бұрын
@@erick._150 Yeah the XR-1 is more refined and a bit deeper tone, that is why I went with it. Going to try the ATAK crate muffler soon actually, it's supposed to be the loudest Borla.
@erick._1503 жыл бұрын
@@ej1025 yeah the ATAK is the loudest. Idk I’ve seen a lot of XR1 videos and it just doesn’t sound deep to me. I came across a video with someone running a Kooks Bullet Muffler he said those are deeper than both the TR and XR1. Im actually gonna try those out they’re $50 a piece
@Table10006 жыл бұрын
Did you loose and low end power when installing this muffler? How is the drone from 1700-2000?
@lsbrandon93126 жыл бұрын
Todd Davis idk bout him but mine isnt so dronie at that range
@daleleibfried86486 жыл бұрын
Sounds gr8
@TheMjoacim6 жыл бұрын
dale leibfried thank you!!!
@sswcubes5 жыл бұрын
Hey guy, you got it dumped before the axle? Any vids of the underside?
@loscar5oh5 жыл бұрын
It look like its dumped right behind the passenger wheel. You can see where condensation comes out onto the concrete.
@luisortiz25316 жыл бұрын
How you like the cam? Does it perform good? And which muffler you like better the carven or the borla?
@TheMjoacim6 жыл бұрын
Luis Ortiz I’m very impressed with this cam’s power curve through the RPM range. It’s added good power and torque across the board but still has great street manners paired with the 3200 converter. Honestly, the Carven sounded better because it was louder at idle, but the Borla is more tolerable and sounds better under throttle, in my opinion. I have since put an electric cutout on it, so that’s my favorite, lol.
@jasonloera33583 жыл бұрын
Which cutout did you go with? Also I just installed a stage 3 btr cam in my 4.8 today but it won’t stay on unless I give it gas. Do I keep doing that until it stays on by itself
@loganlunsford49943 жыл бұрын
No you’re gonna need a tune.
@jasonloera33583 жыл бұрын
@@loganlunsford4994 i can’t drive it to the tuner?
@sylesneski91765 жыл бұрын
What state do you live in and who did your tuning?
@TheMjoacim5 жыл бұрын
I'm in Texas and I did the tuning myself. I learned from some very skilled tuners around Houston, though.
@CharlesEllsworth89 Жыл бұрын
Is it dumped before the axle?
@christian6817 Жыл бұрын
Is the truck on 93 Octane?
@LandonClimbs3 жыл бұрын
What supporting mods are needed for a btr stage 4 cam lol.
@jay350884 жыл бұрын
What's the rest of your exhaust set up? Headers and y pipe to 1 3 inch borla muffler?
@TheMjoacim4 жыл бұрын
Sinister_Silverado_SS yes sir. 1-3/4 stainless TSP long tubes, 3” y-pipe, 3” pipe into 3 muffler, 3” pipe out.
@jay350884 жыл бұрын
@@TheMjoacim badass man sounds awesome. About to do the same set up on my LQ9 SS. thanks for the info
@TheMjoacim4 жыл бұрын
Sinister_Silverado_SS good deal, man. I have Black Widows on my LS swap Sonoma and they’re rowdy af.
@brianrynders15476 жыл бұрын
Hey man im bout to order the same cam for mine did u still keep your factory push rods they said the truck cam kit u can keep the factory ones
@TheMjoacim6 жыл бұрын
Brian Rynders yes, I kept the factory push rods since this cam doesn’t have a tremendous amount of lift.
@brianrynders15476 жыл бұрын
Ol thank u love the truck to very clean
@joelflores80234 жыл бұрын
What all do you have done to the truck ?
@eric94wilson7 жыл бұрын
How does the cam perform with only having a 3200 stall? I have the same converter and 4.11s and I'm stuck between going with stage 3 or 4.
@TheMjoacim7 жыл бұрын
e 94 w it performs flawlessly. Go with the stage 4 and never look back. The truck's street manners and drivability are spectacular.
@luisortiz25316 жыл бұрын
Im also stuck i wanna change my cam with a stage 4 i got 390s n a 3200 stall
@lsbrandon93126 жыл бұрын
Stage 4 im late but yea stage 4
@Boosted_c66 жыл бұрын
How does it sound when your just driving? I’m looking for something not to loud until u get on it? How’s these? I got a cammed 6.0 boltons
@TheMjoacim6 жыл бұрын
Jesus Torres it’s pretty loud. But I don’t have cats with long tubes. There’s no drone or anything, but there’s never a time where you can’t hear it. It’s pretty rowdy. But it sounds great. Even though it’s pretty loud at idle and cruising speed, it’s significantly louder when you lay into the skinny pedal.
@lukemorgan33687 жыл бұрын
did you ever do a dyno for it? im curious on what kindve power it makes
@TheMjoacim7 жыл бұрын
Luke Morgan unfortunately I've never put it on a dyno.
@adanflores18115 жыл бұрын
Wat size pipe and tip you got going out if you dont mind me asking
@texmextu24 жыл бұрын
Gettin the same cam in my 5.3 .. I swear I hope I have the same chop lol..
@TheDevilsShadow7207 жыл бұрын
did you have to trim down the bed so the tires wouldnt brake the stepside?
@TheMjoacim7 жыл бұрын
TheDevilsShadow720 no sir, they tucked just fine.
@erniefroese50694 жыл бұрын
Which option did you get for the plate box
@tonyc76286 жыл бұрын
what size tires
@alexvaca68424 жыл бұрын
hp?
@luislopez-ht6vh6 жыл бұрын
Whyd you leave ur license plate on their???
@JoseMartinez-cl8lf2 жыл бұрын
By any chance do you have the cam specs?
@logancouch19127 жыл бұрын
more vids of the truck..... its really nice
@TheMjoacim7 жыл бұрын
Logan Couch thank you very much. More content on the way!!!!!
@quentengulley19836 жыл бұрын
How's that cam perform I've got the same one I'm gonna throw in a lq9 I just bought
@TheMjoacim6 жыл бұрын
It's great for getting these big heavy trucks out of the gate. We just put one in an SS Trailblazer LS2 with ported and polished heads. Its a monster all the way to about 90mph. The cam isn't really designed to yield much up in the higher RPM range, but it gives loads more down low and improves the power curve across the board.
@cisnerostampz17674 жыл бұрын
Hey brother..what size of cam?
@fukmerunin117 жыл бұрын
what is your idle set to? when its warm. sounds great
@TheMjoacim7 жыл бұрын
Bill S it's right between 900-1000. Thanks!!!
@codisanderson34922 жыл бұрын
These dumped over the axle?
@TheMjoacim2 жыл бұрын
No. Basically in the stock location.
@codisanderson34922 жыл бұрын
@@TheMjoacim I love the truck thanks man!! Just pretty much gif the tail pipe for a cleaner look?
@TheMjoacim2 жыл бұрын
@@codisanderson3492 thank you!! It’s actually routed somewhat up into that cavity under the bed and behind the tire so it points down and back and only extends about an inch or so passed the lower edge of the bed.
@codisanderson34922 жыл бұрын
@@TheMjoacim I got you man! Thanks for taking the time to reply!
@josecamacho64907 жыл бұрын
Do you have any problems with the LT headers with that drop?
@TheMjoacim7 жыл бұрын
Jose Camacho no sir. On these newer trucks, the LT's don't hang down past the frame like some of the older square bodies and such. Good to go.
@CarlosHernandez-kx3up7 жыл бұрын
Standby To Get Some
@grandizer45314 жыл бұрын
Hows the drone while cruising?
@TheMjoacim4 жыл бұрын
Grandizer 45 very little drone if any even. But it’s still loud.
@drejackson10004 жыл бұрын
Does the AC works well in traffic?
@TheMjoacim4 жыл бұрын
DeAndre Jackson works perfectly fine. If anyone is having trouble it’s either because the pressures are wrong in the a/c system or the tune has an issue.
@408tbss5 жыл бұрын
What’s the color code on the truck if you don’t mind telling ?
@TheMjoacim5 жыл бұрын
Apologies for the late response. I don't remember the actual code but it's for called "Spiral Grey". Hope that helps.
@danteague78954 жыл бұрын
Need to lower the RPMs to about 500 to get a really good lope...
@TheMjoacim4 жыл бұрын
Dan Teague negative. The cam won’t allow that. What you’re hearing is under 1000rpm. The cam profile and it’s overlap create the rhythmic chop you hear instead of lumpy idle as this cam is designed for low to mid range peak power for heavy trucks.
@info__64037 жыл бұрын
What model truck is that ? i thought only the mexican 400ss came with the step side bed let me know the model thanks
@Hailboundoffroad7 жыл бұрын
INFO __ what exactly do you mean by 400ss? That was never a production truck.
@TheMjoacim7 жыл бұрын
It's just a 2003 Sierra 1500 stepside. They've made the stepside from 99-05 I believe.
@GerardoGarcia-th8mg Жыл бұрын
What spec
@adrian541156 жыл бұрын
What's are the specs on the cam?
@chadewhitaker5 жыл бұрын
What did you use to tune it?
@TheMjoacim5 жыл бұрын
Chad Whitaker HP Tuners.
@alanbazaldua4166 жыл бұрын
What drop you got
@johns818 Жыл бұрын
RIP motor mounts.
@thedirtdigger59904 жыл бұрын
Do u have cats? Trying to get a good deep tone but i have no cats, lomg tube headers
@TheMjoacim4 жыл бұрын
The Dirtdigger I do not have cats. Just long tubes and the muffler.
@thedirtdigger59904 жыл бұрын
@@TheMjoacim thank you thats good to know. I think im going the same route with 2 borlas
@TheMjoacim4 жыл бұрын
The Dirtdigger the borla has a deeper tone in the higher rpm range than the Carven did, that’s for sure.
@memphis901vet24 жыл бұрын
Standby To Get Some did you have 1 or 2 Borla mufflers?
@bobbyacosta65136 жыл бұрын
ok thanks
@itzglycolate33264 жыл бұрын
Where u get the roll pan?
@TheMjoacim4 жыл бұрын
itz Glycolate a place called Mod Shop Metalworks.
@onewheelup7 жыл бұрын
makes a deeper tone dumped down doesn't it ?
@TheMjoacim7 жыл бұрын
onewheelup it's actually just dumped at that passenger side rear corner. If you look on the ground you'll see the wet spot on the ground from the moisture. Now if you dumped it right off the muffler under the bed and in front of the axle, yes, it would rumble much deeper but also be ungodly loud inside. Ask me how I know, lol.
@CrimsonHawk096 жыл бұрын
Standby To Get Some I have the TR, Borla was a pit pricey for me at the time. I love the muffler but i dumped it right before the axle in extended bed. What do you think about placement? Same as yours or after axle?
@josevaldez36934 жыл бұрын
specs on the cam ?
@danielaguilar75262 жыл бұрын
What drop setup do you have?
@TheMjoacim2 жыл бұрын
It’s a 6/8 setup. 2” dropped lower control arms, 2” springs and 2” spindles. The rear is a 6” flip kit and 2” shackle.
@TheACCENT27 жыл бұрын
What size and kind of rims you got
@TheMjoacim7 жыл бұрын
They're just stock 20" GMC wheels from a 2009 Yukon.
@marcosmelena55586 жыл бұрын
Stock heads ???
@TheMjoacim6 жыл бұрын
Marcos Melena yes sir.
@marcosmelena55586 жыл бұрын
Standby To Get Some thanks for the fast response lol sounds good hopefully my stepside sounds similar to yours
@TheMjoacim6 жыл бұрын
Marcos Melena no problem, man. Let me know if you have any more questions.
@ScottHBrown7 жыл бұрын
What's the LSA on that cam?
@TheMjoacim7 жыл бұрын
Scott Brown 111 +2.
@briandetrick26882 жыл бұрын
Stage 4. That's for people that don't know the lift. Or don't realy have a cam. This motor is as stock as a loaf of bread
@brandonandjack81486 жыл бұрын
What year is your truck
@TheMjoacim6 жыл бұрын
Mr Shartking 2003.
@bobbyacosta65136 жыл бұрын
what year is that ?
@TheMjoacim6 жыл бұрын
Bobby Acosta 2003.
@connorcovington60067 жыл бұрын
Whered you get the rollpan from?
@TheMjoacim7 жыл бұрын
I ordered it from a place in California that builds sheet metal parts for trucks, I'd have to go back and look. Most roll pans for a stepside are plastic or fiberglass. I wanted steel.
@blakededeaux71556 жыл бұрын
I need to know also lol
@fidelnavarrete40776 жыл бұрын
What drop is that ?
@TheMjoacim6 жыл бұрын
Fidel Navarrete 6/8
@dylanriggs60476 жыл бұрын
Wheel and tire size?
@TheMjoacim6 жыл бұрын
Dylan Riggs stock GMC 20’s with 275/40 tires.
@sswcubes6 жыл бұрын
One muffler or duals?
@TheMjoacim6 жыл бұрын
97sswcubes 78 one muffler.
@sswcubes6 жыл бұрын
Standby To Get Some coo, i got the same muffler and 3" tubing all the way to the tail pipe but still stock manifold and cats. Headers next and the Y. Thanks for the info
@sebastiansalas52107 жыл бұрын
what year??
@TheMjoacim7 жыл бұрын
i Salas 2003
@sebastiansalas52107 жыл бұрын
i like that truck
@firehawk9564 жыл бұрын
What happened to this truck?
@TheMjoacim4 жыл бұрын
firehawk956 I sold it, bought a 67 Camaro, an Audi R8 and built an LS7 swapped S-10. All will have more content here very soon when I get some more time.
@firehawk9564 жыл бұрын
@@TheMjoacim just bought a 2003 sierra same color step side it's a little rough paint wise but she'll be as clean as urs. Nice garage upgrade lol...!