PROS AND CONS OF OWNING A CAMMED TRUCK *COLD START*🔥

Comment down below if you guys have any questions !🤘🏼
Instagram / @nbs.reyess
Tiktok / @nbs.reyess
Merch Website / Shopreyes.com

[@masondelaney3059]

One thing that helps a lot with the 4l60e is a massive trans cooler. Mine used to keep slipping out of lockup once it got warm until I put the larger trans cooler in

[@Titoo.1]

I remember when I cammed my truck I was 15 and had stock 4l60e with stock converter and a pretty shitty tune for how big the cam is, when I got the tranny built with a triple disk stall and a good tune it was a night and day difference. I recommend anyone looking to cam their car do it right the first time with a good shop who will tune it right and pay for a stall.

[@nbs.reyess]

Hell yeah truly makes a difference bro

[@davidtofast8351]

Nice Job Broski...keep up the chevy riding strong .

[@MrElpato02]

Seen that truck this past weekend. Looks clean.

[@martinez0356]

Truck is literally super clean bro 🤘🏻

[@lowboostedaccord4933]

I have everything to cam it should be doing that soon and throw some power at it sounds good bro keep it up 💯👌

[@nbs.javiii]

bro your up next , support from Cali bro 🔥🔥

[@j.2391]

Bro u made it already 🫡 keep grinding and don’t stop making videos and u gonna reach 50k subs soon 🔜 and never give up even if u feel like theres no point of making videos.

[@nbs.reyess]

Truly means a lot thank you bro🙏🏻

[@antonylopez5742]

It’s nice driving a cammed truck . I get same gas mileage as stock too. I drive mines daily for work 100+ miles a day

[@lamydora457]

How do you pass inspection and emissions??

[@djthreesixty360]

You right about the trans. Mine is down as we speak, it’s my 2nd trans

[@baby_ish1393]

Sounds wonderful bro 👍🏽

[@kevinduff7833]

Such a sleeper bit so damn sweet bro!!! Love it. I'm 6.0 swapping my 07 silverado rn

[@efcoi2898]

i have a 07 sliverado also not sure if i wanna 6,0 swap it let me know how it went man!

[@deadbody6112]

@@efcoi2898sounds like it didn’t go good lol

[@efcoi2898]

@@deadbody6112 starting to think so also lol

[@carlosmacias604]

🔥keep it up padre !🤘🏼🧿

[@ysnflako1]

Appreciate it brooo!! u help me find the issue for the truck, I just needed to buy a torque converter for my cammed since I had a stock and it will turn off on me .

[@Sphtx713]

My fav truck in Houston 🔥🔥🔥

[@nbs.reyess]

Thanks bro💪🏼

[@ericrodriguez6182]

Sounds amazing on the cateye 🔥 would like to see a 6.2swap fbo 😁

[@nbs.reyess]

Go big or go home 👀

[@Gallitos.el.Kevin313]

I have a 6.2 single cab fbo nbs sounds amazing 👌

[@yungtooli]

@@nbs.reyess put a 7.0 if you wanna go big

[@tomboy1875]

My engine builder told me to stick with the 5.3 and go big with a power adder. Theirs more cylinder walls to play with compared to the 6.2. I have both the L86 6.2 in a 2015 with an 8 speed and a 2007 classic with the regular 5.3. Ima build it along with a 4L80, bug cam ported heads and a lot of nitrous.

[@adri2307]

Ls3 would be sweet 🔥 like you said “go big or go home”

[@nbs.reyess]

That’s right 👀🔥

[@markbates2059]

Looks like it ready for bags that's a nice c notch .I want to drop mine with under bed notch I know it's gonna hit .I bet that set don't bottom out rides good

[@silensycko]

Same setup i have! Sick video!

[@elegantjaytv]

Love the looks of your truck. What are the specs on your wheels and your drop?

[@abramg11]

Can you make a video how you wired up the DRLs to be on with the turn signal and park lights on the single cab?

[@delta-theoryarizona4256]

Just bought a cateye 4 door chevy 2007 kinda like yours yesterday in maroon im very happy with it

[@nbs.reyess]

They’re great trucks , you’ll have a lot of fun with it bro 💪🏼

[@delta-theoryarizona4256]

@@nbs.reyess thanks ill be watching your channel for ideas

[@dominiclopez7444]

Show us how good that cutout switch works looking into that sick truck btw

[@ryanhicks5371]

I got lucky and got an 04 cateye with the trans cooler radiator and a rebuilt jeggs transmission, and the only issue I've had was the shift solenoid which a corvette servo did wonders in preventing again, also having a bad electrical issue with taillights, grounds gd fuses and switches gd so now I'm at the bcm as junction block is gd. BUT she looks so good with new headlights released by Z-OFFROAD LED Headlights Assembly. Even if I get rid of her with these electrical problems I'm getting another cateye so I can keep these headlights lol.

[@thedon217]

Bro I went with those headlights and aftermarket taillights. I sealed all the connectors and it fixed the problem.

[@noarhipez8897]

I'm surprised my neighbors didn't trip because I used to have a stage 3 cammed silverado with header dump and I would rev it and drive it all the time

[@masoncnc]

Old guy advisory: Make sure you young studs are putting at least 10% of your earnings away in a 401k before tinkering with your cars. It sucks to wake up at 50 with no money.

[@jasong3056]

makes me miss my crew cab gmc cammed out 😭

[@NBS.Ruizzz]

sounds beautiful

[@hcolin4165]

DaaaYuuum homieeee that sounds Bad to the BONE!!!!

[@joeymcquilkin3670]

Do you know what numbers your pushing with the cammed truck?? * You should keep the v6 and put a BIG A$$ TURBO on the single cab - upgrade trans/ engine management/ fuel - dude on the real not a lot of people do this and it’s a really nice and easy build.. when/if the 6 goes then build the bottom end and throw it back in there wit more boost OR LS swap then

[@AlexKortaz]

Sheshh sounds clean.

[@nbs.reyess]

Thanks pa🫶🏼

[@bsmothers1985]

I got a lifted 08 silverado with 37s and its cammed and i went with a 3k stall and went with a 40k trans cooler. Bypass the radiator and it will last longer bc its cooler.

[@shelbystrong3663]

I’m building an LS swapped S-10 with a 4L65e and I’m using a huge aftermarket radiator without trans cooler. I’ve bought a 40,000 GVW trans cooler that I’m mounting under the bed, in the wind but away from debris. I may have to put a fan on it later, I’ll keep an eye on the temps.

[@ItzAlexStation]

clean afffff

[@Jandel2006]

😍😍😍

[@expertandrew6549]

aye bro what about your drive shaft? is it stock or custom cus i heard a lot of people say that the drive shaft be going out

[@therealjackieheezy]

if you listen to this shit with a pair of good headphones that shit sounds like you are right there with the truck that shit sounds sexy asf

[@lauroguerra732]

What drop in the rear on the crewcab bro? Did you fix the Chevy lean if so how did you fix it? Man.

[@fifalgnd2205]

Where you get your drop in Houston and how much did it run looks clean bro

[@garciaenrique7298]

A 6.2 would sound nice

[@videos-for-friends]

Is this truck RWD or 4WD? I have an ‘06 Sierra I’d like to start building on, but I’m stuck between getting a different RWD truck or going with a built 4x4 tranny and going from there. I also haven’t considered the transfer case, if that needs to be upgraded or not.

[@1low_stepside]

6.0 swap on the single cab 🔥🔥

[@nateaccetturo2204]

Do a video of you driving around the cat eye

[@deadbody6112]

Cat eyes are the best looking truck of all time

[@davidanddiana7173]

Yes sir cool trucks 👍

[@Jandel2006]

😍😍😍😎😎😎

[@jerrygarcia2178]

on the tour converter did it make a HUGE difference ?

[@jewbabydono]

Did you notice any difference with that K&N intake?

[@perkiojackson]

its not turning of cuz of the stock trans, its stalling out cause you dont enough stall coverter

[@lilbfrom094princeton8]

@NBSReyes Give me your top two cams in your opinion and what tires are you running?

[@zacharyebersole5928]

How tall is your notch? and how tall does the notch stick out the bed. 7/9 drop?

[@enriquemejia9679]

Saludos desde atl apaaa 🙏🏽💯💯💯

[@nbs.reyess]

Saludos 🤘🏼

[@gilbertomolina9370]

Either go 6.0 or 6.2🔥🔥 make it a zl71 💯

[@ReyMartinez-qr5de]

What cut off system do you have for the exhaust

[@GeorgeCampa-cm2nr]

I wish Chevy would do some about the transmissions my 2018 40k miles fucked up

[@1lowextjona]

Have you tried fixing the fitment on the headlights for the bubble eye?

[@nbs.reyess]

Not yet

[@ktmc.anthony9302]

on the bubble eye do a 4.8 turbo swap

[@billybob-gy8bx]

If you cam the motor always change the torque converter..

[@Dislective]

🔥🔥

[@renegadereptilez5269]

I have a single cab same color and crew cab same color we got the same set up going.

[@andrewsanders6058]

Hey I'm totally new to cams.do u have to tune your motor?

[@asaelcastro990]

What if you put a cam but you don’t abuse your truck. Can you still leave the 4l60 transmission?

[@jezzie1965]

I’ve never cared about my neighbors ef them my other truck is a Cummins straight pipe usually warm it up for 15 minutes before I go

[@bananacoffee8994]

🍌☕️ was here!

[@_omarhtx]

💪🏻‼️💯

[@refugio9539]

🔥🔥🔥

[@exhaustmob3774]

Truck looks real nice man , what exaust do you have on it and which exhaust do you recommend

[@nbs.reyess]

I have borla xr1 with cutouts , I really like the magnaflow bullet tho sounds nice I recommend it

[@edp445hunter]

Aye pa next video idea should be your job vlog

[@leonardosoto7686]

damnn i wanna cam my bubble eye even more now😩

[@walterwilson2484]

Put a 5.3 with a 4.8 crank and 4.8 pistons

[@FIxcco]

Fastest cateye crewcab in Houston

[@ryanhubbard-mo7er]

Wat kinda exhaust setup you have ????

[@derlypena9100]

Por que no le pones rines infamous staggered a las 2000

[@ryangartland9629]

LQ9 6.0 LS with a 4L80 trans

[@juliozavala9610]

4.8 with baby turbo on single cab 😤

[@nbs.reyess]

🤔🤔👀

[@stevedaly7042]

Sounds like a washing machine. kids with a 4L60E, lol! Time to step up. 4L79E all day, everyday!

[@Ruckus02.]

4.8 wih a turbo for the single cab

[@jewbabydono]

Yeah my 4l60E is beat all to hell, I want to go up to an 80, but I'm sure there's a better option out there

[@captnjackhoff5126]

With a good tune on a 4l80 they can be mean

[@aaronramirez9147]

grind down them tips everytime you floor it

[@SFLGanG]

Yall sleep on the Ls1…. I be gappin 6.0’s all day with my 5.7🙏🏼🗣

[@JacksonGuitarsPlayer03]

Gotta get it tuned right for cammed. You are indeed correct the 4L60 is a piece of shit excuse the language but I’m literally saying what it is. It’s fragile. The drive train is fragile. Seriously. I dealt with my families Tahoe. 2002 5.3. Rear end broke twice. Brand new transmission and it just shifts like shit. Shifts hardly. It’s weird! 285HP V8 with a crap drive train. It’s a shame. I’d beef your drive train up dude! Plus that motor some more. Save your money and work hard. I got a old 2003 ram with the hemi I work hard for since I was a teen. That truck is a monster. 450HP from 345HP. Bought it it had 390HP Has a tune, air filter (big K&N filter than the ones you see) exhausts (meh possibly a few horse) MSD ignition was like 15HP added could tell the difference! I did a tune up on it and some other crap I felt power difference for a while i had it at around I’d say 415hp. Custom intake manifold, throttle bodies, exhaust manifolds. Yeah Work hard bro keep at it save the moneys sweet trucks I like the old Chevys a little bit they are nice to drive

[@nbs.reyess]

Highly agree on the tune, thanks for leaving a comment , very interesting 💪🏼

[@JacksonGuitarsPlayer03]

@@nbs.reyess yea plus get that drivetrain aftermarket or beefed up. Rear end, transmission. Etc etc. you’d get more reliability and tire smoke back there, plus more speed horsepower and the rest of that fun shit

[@IsaiasGarcia.IG.]

What’s ur wheel size and tire size with drop fitted looks clean

[@nbs.reyess]

22s on 265/35/22 with 5/10 drop

[@scottiehysquierdo4005]

What did the shop charge for the cam swap bro?

[@dylansmith4491]

Do nv3500 trans or there are rebuilds to race build it

[@jmorales3207]

How do you say the uprade ? Cam your truck ?

[@Lv.Chris17]

6.0 with a stage 3 cam or a 6.2

[@brandilking13r57]

What headers does it got and what brand ?

[@440videos7]

whats the shop you took it to name again?

[@carloscastillo7469]

I wanna feel like a a bad ass

[@renebriones7151]

Where did you get the 4l80e?

[@DontTripThoKeepItReal]

Hey what’s your wheel specs ?

[@israelmontemayor7922]

Exhaust set up?

[@07350zVegas]

Sounds Badd Ass 👍

[@dukerobinson4937]

6.0 wit bfd chop monster

[@dukerobinson4937]

For the single cab

[@theboys247]

What’s the shops name? I’m trying to get my 6.2 cammed

[@Foritos817]

I have a 260xxx miles on my Tahoe , will it be a good idea to cam it ?

[@nbs.reyess]

Pretty high mileage might not be worth it to be honest

[@statikk6.2]

6.0 swap 😮‍💨😮‍💨

[@christianmartinez9501]

6.2 with a6 speed

[@marcosical8961]

4L80E with 6.0

[@clarkgriswald1768]

Your missing your rubber hood Cushings that go in the fender. The shop probably knocked them off.

[@worldofarmhustling9954]

What’s that paint code?

[@Andres-323]

6.2

[@dantemorales6456]

What drop you got