5-AXIS CAM Tutorial. (TITAN-139M) CNC Machining

Titan Gilroy teaches you to program the TITAN-139M Academy Part. This is our first lesson in 5 Axis (3+2) programming. This is the first of many 5 Axis CNC Machining tutorials from TITANS of CNC: Academy. Each tutorial will raise the level of complexity as you go, until you reach our Advanced Level called "Aerospace 5 Axis" where we will teach you step by step how to CNC Machine complex parts out of Titanium & Inconel.
Revolutionary CNC Education all available for FREE. Learn to become a CNC Machinist or a CNC Programmer through our advanced training Academy, TODAY! Access hundreds of CAD models, prints and video tutorials at the click of a button.
DESIGN, CREATE, REPEAT.
Visit academy.titanso... to get started with your CNC education.

[@allanribu4158]

this is by far the best tutorial for 5 axis programming...thats why i love this channel it helps a lot for begginer programmers like me! gonna watch more from them...hope they upload more vids like this...thanks sir!

[@toycartonfly3123]

Hi, I´am Raúl from Spain....your videos it´s the best... three years ago I´m start to work with CNC machines and I´m very happy with my woodden works and metal works. Thanks for you for to be my inspiration. today I´m doing the always dream. My cnc machine it´s own construcction, bite to bite . two years with three axis, six mounth with four axis and now , today with 6 axis simultaneous. all thanks to your´s inspiratión. thanks and best regards

[@larbigueraiche6721]

BOOM! Awesome 5-axis CAM tutorial!! Thanks a lot.

[@acesayedmohammed6437]

Sir you are great and you have got extra ordinary skills in CNC Machining

[@TuanNguyen-md8cc]

Thanks, you save youtuber alot of money by making this video

[@mykromisfit]

Awesomeness! Keep em comming!!!

[@jn8987]

BOOM! Time to run... Awesome video, once again!! Thanks brother!

[@calebhejny2588]

That's awesome! Have you ever tried milling a helix on the 5th axis? Something I'm trying to figure out is how to program a helix ramp on the end of a round part with the part sitting parallel to the table. Havn't been able to find any you-tube videos that cover this. it would look something like this.

[@danielflonta877]

Great work. Thank you for this

[@DanNel-d6d]

Theres a lot of guys in this video! :) :) Great tutorial Titan!

[@ashishjagtap7787]

Nice video Titan! I was Hoping You'd Run it On Machine 😆

[@arthurtabuchi7760]

Thank you TITAN !!!

[@tbird6142]

Awesome tutorial! Gonna see if my schools shop has a trunnion table of some sort. I think we just have a half dozen HRT210 rotary's and a couple ST20Y lathes. Keep up the great videos!

[@ipadize]

24:20 if you want the tool to go for example from left to right, you have to click the left half of the line and it will generate the toolpath from left to right.

[@suechiheng5844]

Thanks for your teaching Thanks a lot 😀

[@mohamedbenmaktouf6827]

Great job! I m wondering if u can do a video of 5 axis CAM and machining of the same part.

[@abdulkayyoom3199]

thank you sir very Awesome video

[@raider1628]

AWESOME VIDEO TITAN!!! can you do a video on how to program that eagle you machined?

[@jeepaholic326]

Amazing brother. thank you.

[@XPrata]

5 axis PUUUUMMMMMMMM!!! Great video ;)

[@tat2joeelliott]

Where can I find these on your website? I only see the first 9 parts

[@car9167]

Is this 4 axis RTCP or without RTCP?

[@BHud20]

Can you do simultaneous 5 axis milling with Fusion 360?

[@rafihussain]

Teaching is preaching

[@zavalzero]

I'm learning fusion 360 actually. Would you do 5 axis continuous programming tutorials.

[@Nolia23]

In the post processor how do I post it with out N, numbers ?

[@TITANSofCNC]

The post gives you an option

[@viharpatel8195]

I think G54 should be at the center of rotation of the rotary table otherwise it will not compensate Z . We have Haas rotary TR 210 and when we have z at top face then fusion post processor ( Haas trunnions) doesn’t compensate x,y, z . Can you clarify ? Love to learn from you.

[@TITANSofCNC]

The new Haas controls have dynamic offsetting. So you can place your Zero in one place... and then rotate the part and it will always know where its at. Older machines or trunnion's would need to be programmed (3+2) so you have a separate fixture offset on each side... or center of rotation as you suggested.

[@viharpatel8195]

TITANS of CNC: Academy : tnx a lot sir👍

[@odaliscnc4317]

@@TITANSofCNC porque no haces este mismo video para mastercam. Un saludo desde Barcelona

[@raopune9]

thanking you

[@9955CAM8]

awesome

[@kishorbarai_]

Where is your center

[@ipadize]

15:48 could you not just have used a pattern and revolve the one toolpath around instead of making two lines?

[@TITANSofCNC]

I could and did on the second tool... I just wanted to show both styles so people got it. This was a simple version to teach fundamentals.

[@ipadize]

TITANS of CNC: Academy okay, i did Not watch the whole Video when i commented :)

[@juantorres4712]

What software are you using ? You’re too fast and too much pommm. Fun. But I want to see the software windows and why those numbers. And where they go in the program Thank you for a great job

[@MyS10Rocks]

Titan, How does a nobody machinist like me get a chance to ask you business questions? Is it possible?

[@TITANSofCNC]

Join my Titans of CNC Academy Facebook Group and ask all the questions you want... it’s a great group with students, teachers, hobbyists, and machinists of all caliber talking teaching and shop non stop... 20,000 Strong

[@02cahillt]

Boom, Boom Boom.

[@brikmimo3963]

good

[@Gottie333]

Boom

[@vineethbangalore]

i am from India my tool room experience 2D- AUTOCAD LT 3D-SOLID WORKS/INVENTER/PRO-E(PTC) CAM-MASTERCAM/DELCAM(power mill/featurecam) CNC- HASS MACHINE CAE-DEFORM (FORGING SIMULATION) -

[@lukaszkaczmarek2526]

Great video Titan. This part could have been programed few times quicker by using more shortcuts on the keyboard. Double ✋✋ programming.

[@cedriceveleigh]

This is 3+2, not 5 axis machining.

[@henmich]

Leave extra maturrrrl. I get a kick out of his pronunciations.