5 - Combining 2 TIN surfaces to create new surface in Civil 3D

  Рет қаралды 17,113

John Edwards

John Edwards

Күн бұрын

Пікірлер: 9
@jessiemartinez7681
@jessiemartinez7681 Ай бұрын
is it possible to combine more than 2 surfaces, say corridors to your main grading surface?
@johnedwards4115
@johnedwards4115 Ай бұрын
It should be if you just keep pasting surfaces to the newly created one. You just need to remember the order of pasting them. I do this when pasting a corridor on top of the existing surface topo.
@Brokenhill42
@Brokenhill42 Жыл бұрын
Thanks!
@muhammadzeeshan1752
@muhammadzeeshan1752 2 жыл бұрын
thanks for sharing your precious knowledge with us
@matyasgombocz
@matyasgombocz 2 жыл бұрын
You are great man! Thanks for sharing, you saved me a lot of time!
@conradoalveo9564
@conradoalveo9564 4 жыл бұрын
YOU ARE MY HERO.
@ekelwantsFood
@ekelwantsFood 2 жыл бұрын
Hi. Im unable to paste dem. how did you do that?
@johnedwards4115
@johnedwards4115 2 жыл бұрын
Its hard to say without more information, but I guess the main thing is the DEM you are pasting needs to already be in the drawing to appear on the list. Also, I'm not sure if its required, but it would be ideal if each DEM is in the same horizontal and vertical units and coordinate system
@rynrussell2749
@rynrussell2749 Жыл бұрын
Your instruction / guide is very helpful! Only comment I have is if you are copying and pasting from one file to another for those tin surfaces to select the base tin (your "DEM Surface" here) and copy to clipboard. In the combined drawing file, I right clicked and pasted to original coordinates. Since I geolocate everything, it aligned perfectly. @ekelwantsfood this may help you
6 - Creating HECRAS geometry in Civil 3D
11:43
John Edwards
Рет қаралды 12 М.
3 - Creating TIN surface from DEM in Civil 3D
7:28
John Edwards
Рет қаралды 23 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
Using Civil 3D Cropped Surfaces
8:09
Jerry Bartels
Рет қаралды 22 М.
Delineating the Intersection Between Two Civil 3D Surfaces
4:48
Jeff Bartels
Рет қаралды 46 М.
Civil 3D -  Correct Triangulation AddLine SwapEdge
7:43
ACEC Wisconsin
Рет қаралды 27 М.
How to trim a surface in Civil 3D
4:06
CSBT 1001
Рет қаралды 31 М.
Taking Advantage of Pasted Civil 3D Surfaces
5:50
Jeff Bartels
Рет қаралды 44 М.
Pond Grading Different Slopes
3:55
Christopher Fugitt
Рет қаралды 6 М.
Civil 3D - Breaklines added to a surface
13:29
Autodesk Civil 3D Classes
Рет қаралды 50 М.
Civil 3D - Fixing Surface Holes
9:00
ACEC Wisconsin
Рет қаралды 30 М.
Creating Civil 3D Surfaces from Selected Drawing Objects
6:36
Jeff Bartels
Рет қаралды 125 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН