5 Major Expenses When Starting An Embroidery Business

5 Major expenses when starting an embroidery Business
Video Notes
If there are any questions or comments leave them down below.
Free Mighty Hoops Shipping:
Use promo code: romero
hoopmaster.com/ref/Romero/
Or
Place orders via telephone and mention “Romero Threads”
Call Hoopmasters at: 262-257-0930 (within the contiguous US).
Embroidery items we use everyday.
---------------------------------
Embroidery Sharp Needle: amzn.to/3ldQnku
Ball Point Needles: amzn.to/3Yg3y3h
Graphic Alignment Ruler: amzn.to/3JUQ60f
Embroiderer's Helper Placement Tool: amzn.to/3YEIRgS
Fiskars Rotary Cutter, Titanium: amzn.to/3I8aFFd
Tide Pen: amzn.to/3Ialpmj
FlexFit Hat: amzn.to/3YDkqk5
Puffy Foam 3mm: amzn.to/3RNzd9u
L-Style Towa Bobbin Tension Gauge: amzn.to/3YjUDO5
Amazon Essentials: Items we use everyday
Must have embroidery items: amzn.to/3DStHwK
Books I read: amzn.to/3YFpsN7
Photography & KZbin Equipment: amzn.to/40KI5AT
Shipping supplies: amzn.to/3RLwtJN
Yupoong 1501 Heavy Weight Cuffed Knit Cap
amzn.to/3e5ssNt
Visit our Embroidery Amazon Page to view what products we use for everyday use:
www.amazon.com/shop/romerothr...
AllStitch (everything you need for embroidery)
allstitch.com/?ref=RomeroThreads
Groz Beckert Titanium Coated Embroidery Machine Needles (size 80 / 12)
amzn.to/3aGyaCD
Sulky Of America 12 Color 3mm Puffy Foam Assortment, 6" by 9"
amzn.to/3m1tq1s
Gingher 4'' Curved Embroidery Scissors (best of the best)
amzn.to/3ekzOO7
Fiskars Curved Craft Scissors, 4 Inch
amzn.to/3p5Dbue
Embroiderer's Helper - Template Aid - Placement Tool
amzn.to/36FJ2jO
Towa Sewing L-Style Thread Bobbin Case Tension Gauge TM-1
amzn.to/3xxjPmr
Mini screw driver case:
amzn.to/3q8gI1K
Dritz 710 Mark-B-Gone Marking Pen Combo Pack, Blue & White
amzn.to/3oKJnYF
Duckbill Scissor
amzn.to/3qSKwP2
Odif USA 505 Spray and Fix Temporary Fabric Adhesive 12.4oz
amzn.to/3q2XZDT
Shipping Department:
Amazon Boxes: Aviditi 886 Corrugated Box, 8" Length x 8" Width x 6" Height, Kraft (Bundle of 25)
amzn.to/2Lqbvmg
ULINE 25 Clear 18 x 24 Poly Bags Plastic
amzn.to/3pU6Sje
Avery Shipping Address Labels, Inkjet Printers, 50 Labels, Half Sheet Labels, Permanent Adhesive, TrueBlock (8126)
amzn.to/2P4FAGj
DYMO Digital Postal Scale/Shipping Scale, 10-Pound
amzn.to/3pPaT8D
Photography Department:
-Hat Holder:
amzn.to/2We67rf
-Hat Helmet:
amzn.to/3rwq3kS
-Back Drop:
amzn.to/3BOHMsy
-Reflector:
amzn.to/3kQZyoL
With Amazon affiliate links, I earn a small commission and it helps the channel. Thank you for supporting.
0:00 Introduction
0:34 Your Embroidery Machine Expense #1
2:13 Computers & Softwares
5:45 Hooping Accessories Expense #3
8:54 Blanks & Consumables Expense #4
12:18 Office & Shipping Supplies

[@escaped7062]

I love all of your videos! So informative and you're humbleness shines through! Thank you for sharing!

[@sadiqabubakarsaid4010]

you are awesome, great advise, am an embroiderer with a manual machine but i upgraded now to computer machine trying to make it more commercial than labour to the customers, your just on point, you really know what you are talking about. thanks a lot, you gat me as among your fans anyway.

[@apfli4994]

Perfectly explained, i am just right in the middle of this process. Thank yoo

[@dvenezue1a]

Oh my gosh! Thank you for the most useful video on starting an embroidery business!

[@donnierearden8334]

Thank you so much for sharing your knowledge … I’m wanting to purchase a machine sometime next year & I’m doing my due diligence in which direction to go …. It’s content creators like yourself that is so valuable in helping beginners like myself make the correct decision on where to start … again thank you very much for taking time out of your schedule to make this video & I’m definitely subscribing to your channel

[@Mr_Chuckles]

Excellent video, thank you for sharing your knowledge and experience.

[@ritahunter4653]

God bless you. Glad I clicked on your video. I even clicked on a digitizing ad from which I learnt a lot from as well. Thanks for your suggestions.👏👍😁

[@bridgetgainous3196]

Very informative and extremely helpful! Thank you for sharing your embroidery knowledge.

[@angieyoung8099]

Thank you for taking your time to make this video! It was a great help.

[@ZsoCreative1NJ]

Great video as always! Important information!

[@Sewsweetbyisa]

Awesome information!! Thank you

[@akarim909]

This guy sounds so polite and helpful. Subscribed my friend!

[@Jason_in_Brazil]

Very informative video. Thank you!

[@LucyLu70]

Thanks for another Informative video

[@regalzumba1]

Thank you for sharing your knowledge, it has been a huge help in choosing a direction.

[@samlovefpv249]

Thank you. Great video I'm looking to start Business

[@mariatomczak3974]

Excellent! thank you!

[@bribnkr13]

I love the Adams dad caps. They’re so nice

[@jessiegibson9023]

Good video thanks

[@jackjfb8439]

Phenomenal advice! Thank you so very much for explaining this in such a detailed yet understandable way. Now we gotta decide on the budget😮

[@Reason_Breathing]

Thank you for this informative video!

[@sewferventembroidery]

Great info!

[@MAC35REM]

Thank you! I enjoy your videos, they are very helpful.

[@RomeroThreads]

Glad you like them!

[@kennethhariston6947]

great video

[@ninjahirodude658]

Hoops, Hoop Master, and more Hoops.... Pro level software...

[@ShaynaKrause]

Ro, this is a well detailed video.

[@RomeroThreads]

Thanks!!

[@fasloan]

Great video

[@marlondewsidewskustomz9193]

Salute brother. I'm Navy as well. I have my own print and embroidery shop too.

[@RomeroThreads]

Awesome, sounds like you have your hands full. Thanks for stopping by.

[@angellove1619]

Im running a Fuwei 1500 commercial machine and I have a laptop running on a 64 GB ram and wacom tablet and Hatch 2 digitizing software. I am looking at getting a hooping system soon so my shirts are spot on. My price point was in the thousands to get started. No included the furniture that I had to place my business software on. I spent about 10k dollars+ not including the stuff to use in the embroidery aka stabilizer and thread thats on going. Hehe ppl think its easy to get started.

[@harmony4422]

Great info, thanks! I haven't started doing caps yet so I'm a little nervous.

[@RomeroThreads]

Thanks! It takes practice, but once you got it dialed in, its all down hill from there.

[@angieboulware4627]

this was a wonderful detailed video. all the information was, however i did not hear you mention the power bill cost. can't leave that monster out. overall great video.

[@nancybaez9259]

Great video!!!

[@RomeroThreads]

Thank you

[@michaelpartida5155]

Great vid. What are your 3 best recommended machines for entry into embroidery?

[@jernestoporras]

Just bought a Ricoma MT 1501. Thank you for sharing your wealth of knowledge. It's great seeing so many Latinos entrepreneur. It motivates me to do my best so I can succeed.

[@beretta83907]

Love to see it good lucc to you!

[@HatBodega]

How is it going with your machine a year later?

[@rahatkhan2288]

How is your machine going

[@cappysage7773]

Thank you

[@RomeroThreads]

You're welcome!

[@kittys.2870]

My passion is Ren Fairs, SCA Events, Highland Games, Viking Fest etc. Celtic crests boarders and related historical representation. Niche market. Don't think blanks are available.

[@Desirae-iw3pb]

can you do a video on using the gen 2? I'm having trouble using the gen 2 and it losing registration

[@bennybalam]

This is very useful especially on the laptops and specs. Please can you do a studio tour of your setup?

[@RomeroThreads]

Thank you, yes I can definitely make a studio tour video. I have that one listed on my to do list.

[@bennybalam]

@@RomeroThreads I have a follow up question. Would you consider buying a UPS a major expense for this machine. Perhaps for you in the USA power interruptions and fluctuations might not be an issue, but it is in my location. Can you recommend UPS specification for a machine like that. I intend to buy a SWD-1501-8S, the servo motor is 160watts

[@Clevercovers]

Thank you! Really appreciate this information. Looking at bringing this into my business

[@marshallsmith501]

unrated channel

[@butubuta]

Thank you, but what about the cost of electricity?

[@RickeyDen]

As always, great tips. You again caught my attention with those mighty hoops on the wall (lol). Thanks for sharing.

[@RomeroThreads]

Lol, thanks.

[@machinos7]

Ro, how much do you think you can make $$$ yearly with one machine? Also, how do you start the marketing process? Door to door , Facebook ? Thank you in advance!

[@raulgonzalez5914]

How much do you buy your flexfit 6277 ?

[@scottkintgen7797]

How do you charge for shipping

[@Mk-hq2gc]

Can this machine be used for t shirt, beanies, and hats at the same time?

[@Snow1e]

Great video. However it'd be nice to timecode these so that people can navigate easily and be able to jump to the section of interest. 0:30 - Machine 2:10 - Software 5:42 - Hooping Accessories 8:50 - Blanks and consumables 12:15 - Office and Shipping supplies

[@RomeroThreads]

Great Idea, I will begin to use this navigation tool on future videos. Thanks.

[@chadd587]

@@RomeroThreads Not that big of a deal. Snowie is one of those overachievers. Nearly all your viewers come here with time to spend watching these videos because we are interested in what you have to say about it. This ain't TikTok.

[@movingnow3041]

Great tip for replaying , thanks Snow1e

[@cama5259]

Please enable closed captioning

[@mahapaisal3770]

How much is ricoma??

[@willgomez6882]

Excuse me sir, how can I take your book?

[@HOLES69]

I want a “gator clamp” that’s over a thousand bucks. The problem is that I have a double headed Tajima so I’d want to get two of them 🙃

[@RomeroThreads]

Pretty pricey, you might have to get four.

[@lifebidesign]

Ok you're funny. You can use a PC or MAC computer but it would depend what digitizing software is compatible. Also the Adobe suite is compatible with both PC and MAC. You wasted your money. You can just get a PC with 32 gigs of ram and a CPU with 8 cores, with a 1TB SSD drive, that's all you need. Now for storage you can get an external 2TB SSD. If you want you can build a desktop PC and use this as well. For the Adobe suite you need to setup correctly for video editing or else it will not run smoothly. MAC users should use final cut pro since it's native to macs operating software.

[@RomeroThreads]

Ive been using Adobe products since 98 so Im well familiar with the setup. Im a Mac user, and I use the PC for only one reason, and thats to run My digitizing software Wilcom 4.5 and Hatch 2.

[@blancobronco1346]

Great Video. I’m looking to get one myself. Can you put the description of the software you use.

[@RomeroThreads]

I use Wilcom Studio Designing 4.5

[@blancobronco1346]

@@RomeroThreads awesome thank you!!!

[@blancobronco1346]

@@RomeroThreads can you use this for heat pressing for t-shirts and hats?

[@RomeroThreads]

The software is for embroidery.

[@blancobronco1346]

@@RomeroThreads ok thanks for your help. Looks like it’s great software.

[@berlini985]

Which version of Wilcom are you using im debating between the design decorating and lettering I’m not sure which one to pick. I want the best of them. I’m embarking in embroidery journey just purchased my machines and now I’m waiting on it and been watching your videos while I wait.

[@RomeroThreads]

Hello, I am using EmbroideryStudio e4.5 Designing.

[@berlini985]

Question do the send you a disk and drive or is it digital purchase. I’m trying to decide when to buy one since I’m waiting on my machine. Is everything online or it’s a CD/usb drive. If you don’t mind me asking which company did you go with. What are the limitations with hatch and is wilcom learning curve hard. Do you have any information on learning digitizing for either or both softwares.

[@RomeroThreads]

When I ordered my software, I called Wilcom directly and spoke w/ Theresa Pierre, and she was very helpful. Once you order, they mail you a usb to install the program and a usb key to use the software everyday.

[@xierxu]

Why don’t you tell us the cost for the free software?

[@kojomensah7474]

Greetings so how much did this machine cost you I did not hear you clearly

[@ericaesslinger5556]

14 15 grand

[@adrenalinejunkeee45]

Do you think 16gigs of memory is sufficient to run Wilcom e4.5?

[@RomeroThreads]

Yes, 16 gigs is good, thats what I use. Of course bigger is always better, but im good at 16 gigs.

[@adrenalinejunkeee45]

@@RomeroThreads I pulled the trigger last week to by e4.5 cause of watching your videos and seeing the simplicity of making the edits. Also, thanks for making these videos. It’s helping me a ton on how to do things.

[@RomeroThreads]

Thanks for the feedback, much appreciated. Enjoy the designing.

[@motor2063]

Where I can get the 112 hats?

[@RomeroThreads]

Sanmar or SSactivewear

[@garygalarrita2272]

Great video. Very informative. Thanks.