When I updated my firware to v.1.06.200 it also updated the firmware on my controller at the same time, I do not use the computer to keep the controller updated. I also always use the cables that came with the drone, neatly packed into the orginal bag that also came with the combo version. The Mini 2 is my travel drone outside of EU and very useful.
@luisrojas3839 Жыл бұрын
I'm very happy you could solve your cable / firmware related problem. Mine is still with the problem and i can't update or downgrade.
@dronesandmore1977 Жыл бұрын
what are the symptoms? Is that for your RC or aircraft? Do they show up in DJI Assistant?
@luisrojas3839 Жыл бұрын
@@dronesandmore1977 i just told you on your previous video
@luisrojas3839 Жыл бұрын
I have big problems after update controller RC 231 N1...!! My controller is be able to identify and pairs the drone without the smartphone plugged in the controller. After some time working without problems, i updated the controller to v04.11.0034 from the DJI Fly app (downloaded from the DJI official site) and now THE CONTROLLER DOESN'T LINK WITH ANY PHONE. I've tried everything, three different phones, android, iphone, some different USB cables, type C, type A with OTG adapter, lightning, everything. The only interesting part it's the phones starts to charge when I connect the cable, but it's not recognized for the controller trying all the suggested methods. I've connected my phone with other DJI controller before and worked perfectly, also linked my phone and drone with other controller and works fine. In Android i tried activating the Developers mode, the USB depuration, deactivating the USB charge, with the same results. Also I tried to do controller firmware downgrade or update using the DJI assistant for Mavic, DJI assistant for Consumer Drone (downloaded from the original the DJI website) bit shows just the current version and, no downgrade or update allowed. I'm very frustrated because I have seen the same issue like other owners but anybody has solver it.
@dronesandmore1977 Жыл бұрын
In DJI assistant can you do anything about the software at all? like "Refresh" perhaps? I did see that on my end. Also did you contact DJI Support?
@grossi46 Жыл бұрын
Fantastic that you finally got it sorted buddy. The joy in your voice says it all 😀. Subscribed 👍
@backcountryexplorer68413 күн бұрын
Do you know if DJI fixed the RC firmware update I haven’t done the update sense it was launched because of the issue have they corrected the issue?
@olaviretkeileeАй бұрын
Thanks for your video! I would also like to add that it might be a good idea to restart your phone after new update/firmware. Mine started working after that :D
@backcountryexplorer68413 күн бұрын
Also why am I getting lighting is to dim warning? I never unlocked it idk not sure what’s going on.
@tomm7966 Жыл бұрын
Top Marks to you for effort and solving this problem. 5 videos to explain and solve it. Great follow-up and progression. I have the same problem and have done many other reconnection options without remedy. Several other videos have not produced any result I am hoping your solution solves my problem. I will try it this weekend. I'll add a comment if your technique works for me.
@gabreal2585 Жыл бұрын
Hi how was the update?
@pdtech4524 Жыл бұрын
Note some USB cables are CHARGE only ie there are no data connections in the cable.⚠️👍
@dronesandmore1977 Жыл бұрын
Yes indeed, very good point!
@veselingramatikov Жыл бұрын
Same problems Air2s. RC wont connect to the phone. Now updating and maybe buying new cables and using different android devices. Will replay with outcome.
@tonysimek Жыл бұрын
Good stuff!!
@Afridroneclips6 ай бұрын
Here is the same problem with my drone i have 7 RC cables now and 3 Android phones but unfortunately my drone controller is not connected with these mobiles,then i used other phones and some cables are working with other phones and my 3 phones are not working.
@KikiDaily09 Жыл бұрын
my case was my mini 2 had unstable connection with the rc after the firmware. i had reset the firmware yet still the connection is unstable. the rc n1 still works fine with my mini 3
@dronesandmore1977 Жыл бұрын
There were additional updates since this video, Did you try updating the firwmware again?
@marcterryjadal6520 Жыл бұрын
👍👍
@chillymoore_media Жыл бұрын
My controller backward joystick is not functioning. What could be the problem and how do I fix it
@dronesandmore1977 Жыл бұрын
Sounds like a hardware issue. I would contact DJI Support.
@koblih69 Жыл бұрын
I´m glat that it works 🙋♂
@jhonyoy Жыл бұрын
where i can shop the cable? can you put a link to buy please thanks men im from mexico and i have the same problem
@dronesandmore1977 Жыл бұрын
I got mine from a regular electronics store. Make sure it's not a charging only cable (data transfer is required)
@momentsbyron Жыл бұрын
Why didn't you use the original cable, mine came with 3 type - USB mini, c and iOS
@dronesandmore1977 Жыл бұрын
Because my phone case was too thick and wouldn't let me plug the "90 degree" connector in :(
@alexdaddario2732 Жыл бұрын
How did you get to turn the controller on?
@dronesandmore1977 Жыл бұрын
Turning it on the normal way (pressing the ON button for a few seconds)
@daniell72266 ай бұрын
U mnie nie znajduje wogle plików w dji asistsnt. Piszę tylko ze mam wersję rcn1 04.11.0032. A mam firmware 01.06.0200. Kiedyś to działo. Teraz nie koge zaktualizować samego frimware kontrolera.
@dronesandmore19775 ай бұрын
próbowałeś skontaktować się z supportem?
@daniell72265 ай бұрын
@@dronesandmore1977 po co
@divyaprakashdixit Жыл бұрын
Can we downgrade firmware?
@dronesandmore1977 Жыл бұрын
No, it doesn't seem to be possible... unless you hack into the software using third-party tools (not recommended).
@priyansujathamanoharan Жыл бұрын
I tried but it shows server exception (2-0) error
@priyansujathamanoharan Жыл бұрын
Kindly help me
@eprohoda Жыл бұрын
man!How are tthings?~that is top . see u around~;))
@dronesandmore1977 Жыл бұрын
Good thank you for asking! Just finally fixed a pesky firmware issue with my Mini2 controller. Flying tomorrow! :-D
@mixyom1 Жыл бұрын
Thanks for yr video i have idea for my drone mini 2... Im fly again hehe... I try with remote and then with drone and it take few second... That helping with link and some test... Long time not fly i have ramp my roof i get little injurt my drone kiss me anyway thanks bro... 😂
@70Marc Жыл бұрын
Anybody know how to do this on a MacBook Air?
@dronesandmore1977 Жыл бұрын
There is a Mac version of the DJI Assistance 2 software. It's on the DJI website.
@michaelrosario9956 Жыл бұрын
Yo,,you need to work on your audio,,or speak louda..😷