5 SPEED SWAPPED F100 STREET PULLS WITH OPEN HEADERS!!!

PLEASE LEAVE A LIKE IF YOU ENJOYED!
-I finally got the truck drivable enough to take it to a local show, and needless to say it was worth every bit of effort i put into it. Thank you to everyone who helped out and supported the swap!
-
CHECK OUT MY COUSIN MICHAEL'S KILLER '69 MUSTANG FASTBACK PROJECT!!!
/ @abouthorsepower
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065
-
iNSTAGRAM
@thecraig909
@carrnagge
-
music by : soundcloud.com/jeff-kaale
music by: / joakimkarud

[@terrysmith4351]

Ya know what they say ... if it's too loud your to old ... lol

[@shootermcgavin2819]

to be extra safe, id change the fluid again in 2000 miles to make sure ALL the wrong fluid is gone. Better be safe then sorry. Truck is badass

[@calvinhandley2373]

Seems like a good idea for break-in anyway.

[@shootermcgavin2819]

Calvin Handley true

[@DreamHachi]

Reminds me of when I ran open headers On my truck. I went deaf almost, and pissed off every Prius I passed. Badass tuck you've got

[@piggyburrito8]

Love the truck man your f100 is one of my favorite body styles.

[@jackl3384]

Mine too but I would rather a 4x4

[@andrewstevenson5155]

It was good nice to see the truck running with the 5 speed

[@1manshop335]

Headphone user beware lol

[@positivenegative6525]

1 man shop you’re right, beware of the beauty of the old point ignition cross plane American v8

[@jimmydionne2699]

you shoulr find a 4x4 truck in a junk yard and grab the tunnel cover itll make closing up the floor way easier :)

[@bannablitz247]

In its current volume level this truck reminds me so much of my 69 f100 460 with dual side pipes. Loved that thing, but man did it need work.

[@carlthefriendlyllama2126]

What happened to it?

[@DumbJeepBoy]

youll never mess up more than one guy i had come to me did with his transmission. he had a jeep cherokee with an NV3550 in it. he said he changed the fluid in it and after a couple trips off road it was starting to grind between gears even when double clutching or speed shifting. obvious synchro problems i think to myself. or its low on fluid like he didnt put enough in. transmission felt save-able. pulled the drain bolt out and literal water came out of the transmission, apparently he drove through a significant amount of water and it somehow made its way inside

[@waybachwin1747]

Runs with Scizors Jesus Christ

[@mayo_moto]

Maybe you know this, but the trans angle needs to be within 3 degrees of the pinion angle. The angle with respect to the ground is nearly inconsequential.

[@zaquedavis3391]

You know you're getting old when you say things like: 'It's too loud'

[@matthewmann8951]

You're all liked up bro, peace. F series bumps rule.

[@laneerwin7951]

I run a 460 with open headers

[@Bbbbad724]

I s that the same engine? It still sounds pretty good. That 289 Mustang is plain vicious. The carb needs to be richer if you uncork the headers. 😅

[@Bbbbad724]

I s that the same engine? It still sounds pretty good. That 289 Mustang is plain vicious. The carb needs to be richer if you uncork the headers.

[@obeylesspunk]

God I love your truck I want to build a f100 all I can find are 81 f150s and Broncos I want a69 or 71 f100

[@mathewwyrick9881]

Ha I have a 1981 f100

[@thatmarred_mustang]

mathew wyrick that's so cool

[@Coronet_shop]

Obeyless PunkGaming i have a 1972 F100 engine is locked up but transmission is good. Kinda wanna sell it but shoot me a best offer, I’ve put $600+ from parts/labor

[@DreamHachi]

Theres quite a few of em around here. If you don't mind long beds.

[@matthewmann8951]

I love that series of Bronco you have on your floor of your TRUCK YAH. FORD

[@vincem9468]

I just drove my 65 ranchero with open headers to work and my ear are regretting it 😢😅 worst part was the smoking oil at 90 degree ca weather. Lucky I made it back home

[@billypierce4247]

Does it still not spin the tires?

[@Thecraig909]

Billy Pierce I couldn’t get anywhere up in the rpm range because it was way too loud.

[@billypierce4247]

Thecraig909 its never too loud lol jk

[@KC-lg7tx]

Thecraig909 ear protection lol

[@robertdees2179]

Sounds like you need a bigger cam, also put on 2barrel heads with 4barrel intake. That old Ford will haul ass, we did that with my 390 in a 72 Ford pu

[@jamesbascombe8274]

Nice to see people working on the old trucks. I have a 68 short box. Been working on it for a good while now. Needed a new wiring harness and some other things. I have a five speed manual in mine also. But I went with a hyd. Clutch because of the clutch pressures. Lol.

[@The-Trinity-Bro]

For some weird reason that’s what my old ej1 civic called for if I remember correctly

[@kylevantassel7259]

Jesus , here we go with the altered terminology. What is a "street pull" exactly ? Let me guess , you keep hearing others talking about "Pulls" and now you are just following suit ? The term "Pull" started some years ago , probably when you were in diapers or before and referred to a "Dyno Pull" or Dynomometer where in the engine was pulling a mechanism (Just moving fluid really) to guage its power level. So like with all things Millenial , one of them hears the term and thinks its cool or makes them sound knowledgeable and they use it to describe a ride in their civic and then the others think it also makes them sound like they know shit too so then it spreads like wild fire.... It makes my brain litterally hurt.... The things I hear these days with the new car culture.

[@davidmoore5021]

Loud pipes save lives. 5000 douche bag bikers can’t all be wrong. 😂😂😂

[@413-n9k]

I would rather have this than any new truck. I would take the new truck sell it buy this and mod to my hearts content. God bless country people❤️🤠

[@Tomcaatt]

I was told to use mercon- dextron /3 in my WC t5 , and like a dummy I said are you sure , he said YES ! ( why am I hollaring

[@andrewstevenson5155]

I hope this video is good i basically paid u in advance lol

[@darrenjattan4277]

That's engine noise. I love it my favorite types of trucks. Old school

[@Dmar1078]

Your truck is badass man love it

[@dougshelton69]

I'm going to do same thing you did on head room with flag..instead it'll be stars and bars....looks good

[@NICKSSHOP]

man ur truck sounds so cool and so good great job

[@Coronet_shop]

Congratulations on the 5spd, Craig what will be next?? Another dentside but 4x4 (73-77) as an car hauler for the crew to use or a 2 door classic car rebuild? 🤔

[@lc9929]

Eew. They put an pro-abortion ad at the beginning of your video.

[@pingpongstar11]

L1011 TriStar Good thing god is a made up thing.

[@jameswil7687]

@@snackler6102 amen

[@cameronnorton5898]

@@pingpongstar11 I am not going to pretend to know either way, but who the fuck are you to say anything like that? Show some humility. You don't know, so don't pretend to.

[@geesjohnson]

@@snackler6102 do you STILL believe in SANTY-CLAUSE and THE TOOF FAIRY as well???

[@geesjohnson]

@@snackler6102 yeah, A FKED-UP WORLD where Donald Trump is POTUS...U.S. soldiers KILL BROWN-SKINNED, CHILDREN just about EVERY-DAY...'Cept they call it "CO-LATERAL DAMAGE"...Think GAWDZ GOWNNA PUNISH THEM???

[@vintagespeed]

damn, that hurt my ears on video....can only imagine how bad that is in real life....yikes...!

[@brandonheath7478]

Headphone user warning! Great video! Love the progress Craig

[@hamish2202]

put dual glass packs on it so u can still hear it but will take the ghastly droning noise

[@matthewmann8951]

I ran out cause I thought the garbage man was coming, but it was you starting your TRUCK UP LOL I SAID LOVE THE SHOW DUDE!

[@TheFoxShop]

I think one of your best videos! Well done!

[@Munch.b0x]

11:58 truck ricer, pulls up to a meet revving😑😑😑

[@Munch.b0x]

Yea, but "ricers" do that same shit😑 if it was any japanese car that did it, mad people would be calling them a ricer

[@tylerbarber8895]

Why do you have a Chevy bowtie on you trans tunnel

[@obsessedwithcars219]

how did you not get popped for loud exhaust?

[@InTheFleshInc]

I have to know how you did the flag or what it is a wrap, paint?

[@No-vm7go]

Makes me wonder what my 360 would sound like w open headers. Neighbor already hates it. haha!

[@Backwoods_870]

Drop a nascar Jericho transmission in it

[@413-n9k]

Custom is always better than new

[@nicksspeedshop8664]

I love your vids dude but mostly I come to hear your truck to get an eargasm lol

[@andywagoner4869]

Where did you get your headliner?

[@connoisseurofcannabiscarsp3755]

I have a 1955 F100 /2015 COYOTE ENGINE Swap with a /T56 magnum & 9 inch rear with 4.10s since its a 6 speed and runs like a beast!! I had a Ford Crate GT40 347 Stroker with a Tremec T.K.O 5 Speed and the same 9 inch.. The frame is MII Conversion up front with a full ACCURIDE Bag set up with a 4 link out back.Im also running a custom exhaust with long tubes thst exit from the body out of each side above the rear fenders behind the doors threw Series 10 Single Chamber Flowmasters It has a custom bench seat with a center relief for the shifter..Truck is Giant .7 Flake Silver/Champagne on Weld Drag lites,15x12 335/35/15 Rear PZeros /15X9 275/50 FRONTS.. HAS VINTAGE AIR.Its a TX truck and has ZERO RUST AT ALL ANYWHERE NOR EVER HAS. I DRIVE IT PRETTY MUCH SLAMMED ALL THE TIME..IM 43 AND GOT THE TRUCK IN 1994 WHEN i was only 19..Its been in quite a few races in its day ill admit.. it does pretty well. im not going to keep on but keep up all the work on your truck and youll never be dissapointed..You'll love even more..Its suoer cool..Heve a great time!! C

[@domingocasares9949]

Where did you get the steering wheel

[@chaneymotoxracer]

reminds me of my first truck, 1985 chevy scotsdalle, had n manual nv4500, n daily drove that straight piped lol, cops dindt really care cuz thats south texas xD

[@adhipo22]

Dream truck

[@josephtizol9695]

I’m really enjoying your videos. And I wanted to let you know how you inspired me. I’ve got a couple old Harleys an EVO and a Shovelhead but I’ve been interested in getting into another F100 I had a 65 15 years ago ...anyway I started binge watching your videos a couple days ago and while on my daily eBay perusal struck gold. I just grabbed a 70 F100 390 3spd no rot no rust for short money...real short. I can’t wait til it gets here. Keep the videos coming they’re great and I think it’s awesome you got started at such a young age.🇺🇸

[@williamsanders468]

The like has dropped!

[@navycop0270]

I love the flag headliner!

[@tylerprazzo5378]

Hi, I was wondering where you got your shifter assembly from because I just bought a 3650 trans for my 61 F100 vic swap and I need a shifter assembly

[@romanmontesdeocarmdo]

Sounds like America

[@luvsthose8230s]

You should of left three on the tree.

[@randyperkins3583]

Try and find a pair of the 15x8.5 factory steelies for the rear....give you some good traction and nice look. Like the truck...keep it OG.

[@lukehickory735]

We have a 409 Chevy engine that we’re putting a stainless steel exhaust kit from we’re the muffler used to be back and we did it on a 427 and it’s supper loud so don’t put exhaust on the truck

[@dalehall2993]

DEFINITELY NEEDS DYNAMAT.. YEAH,DEFINITELY DYNAMAT...😎

[@Viktorrhansen]

i always like before watching :D

[@413-n9k]

U still got the truck?

[@calvinhandley2373]

I'm guessing a thinner viscosity, as Chrysler was one of the first to use ATFin manual transmissions, and later called for 10W30 motor oil.

[@justinfahnestock5067]

Love it bro definitely jealous now you just need wheels and tires and to Lower it FATTTT TIRES

[@wideopenthrottle6786]

beautiful truck, would highly recommend black widow exhaust,

[@bford0896]

Hey Craig, I have working on my project it's a 1960 chevy Apache pickup

[@MustangGuy6501]

Great video

[@dalehall2993]

Headphones???...dynamat!!!👀🤣

[@LukeBlizz]

Hey man love your work. Keep it up, but where did u get that cool ass head liner

[@brenthall7399]

How much was the swap?

[@jamieround2072]

NOW NOT GOING INTO 2 ND....??? WHATS UP W/ THAT NOW............ IS IT THE OLD FLUID MAYBE OR WHAT....... DID U EVER GET IT IN & STAY..........???? N GET GOOD RPM'S....?????

[@andyromero7756]

I had a Ford with stock headers they call them 406 headers with a 390 police

[@jamesprice2163]

I want to get a old ranger and build a mini version of this truck it's absolutely badass

[@theshupebros2975]

I run my 78 f150 ranger with the 400 open headers. I love it.

[@budget_hobbies87]

Your boggin it down way too much. 35 in 5th gear is ridiculous dude

[@jacobables4456]

Omg that's the truck I would love to be able to get I want an f100 for a long time and I wanted a manual to make it even more fun

[@flatbroke_9246]

Ford fan I got a 92 Ford f-150 nite edition flat black

[@hulkhemi]

What a beast

[@Stomp_onit]

If it's a linkage style shifter it probably needs adjusted.

[@tadvandyke1032]

T5 takes ATF

[@clinteastwood9115]

I did this with my cobra mustang! I couldn't hear the radio!

[@johnchud7507]

Craig when are you going to get back to the other truck and finish the vic frontend

[@jacobhogan3958]

Loved the vid! I got one of these trucks and was wondering what you needed yo do this swap?

[@crazyryan2689]

Your truck is amazing!! I want that same headliner!!

[@SwaggerDaswag]

Kick ass

[@eanhartman9574]

The moment I've been waiting for! Awesome video man keep it up!

[@devincatron7898]

As old as this video is I still watch it every day just for the pure v8 sound

[@laneellsworth7420]

Have you tried double clutching to go into 2nd or 1st?

[@chevylandt.v]

Your welcome thank you for the up dates. And I will

[@Jacobkiziah]

Love the way it’s coming. You should get new wheels

[@KaiserBruh]

Doesn't go I to second because you're not double clutching

[@rafatrill]

So all that and second gear doesn't work? That sucks

[@cameronpitts6835]

Where did you get your instrument panel?

[@ezekielbrgs5744]

don’t worry I always like the vid before it even starts

[@richardgarciajr2774]

Love the truck used to have a 64 ford f150 loved that truck had a 98 mustang 303 in it ran smooth

[@richardgarciajr2774]

Sorry 302 motor. Dual exhaust C6 transmission

[@nicholasfreeman7516]

First

[@forterierocks]

Get some Borla Atak mufflers they sound so good

[@onthefarmandoffvlogs]

Maybe put your exhaust back on lol

[@boredcompsciguy]

Did you figure out the fighting second gear shifting issue?

[@natesv04]

Passenger side brake light looked like it was out