5 Tips to improve your Guitar Looping | Lesson | Thomann

[@humanbeing2420]

The Boss RC-30 is a great looper. Two tracks, 99 memory banks - it's awesome. Fantastic practice tool, great for getting ideas down, and tons of fun.

[@Noir0rioN]

Yeah it is. It's a blind buy. Just pick it up, man. (...or you might never get to experience the thrill of playing both parts of "Are You Gonna My Way?" -oh, and a trillion others. I just had to do that one first.

[@oxytocin5705]

Important tip, if you loop multiple layers: use different pitches. If your first loop has a lot of low notes, play high notes (e.g. above the 12th fret) for your second layer. With this method you prevent your loops to become muddy. It's in generall a good tip for composing. :)

[@rovo1703]

Most important tip, right here! Less clashing = more clarity

[@MrMd5555]

Good point. Sometimes we take some of the fundamentals for granted & forget that the basics need to be covered too for those just getting into looping, recording and or playing with other instruments

[@JohnnyNiks2023]

Thank you

[@boomerbassmeme]

My looper is part of my multi pedal. The main problem with that is when I want more gain for solos it affects the clean part I wanted to loop. After seeing this thinking a separate looper is the way to go! Beats the hard way I have been working around it by laying it down on a Wiretap then just playing along to the computer.

[@boomerbassmeme]

@Philip Schlaepfer Thanks! I am IRL boomer that plays bass and am a living meme that makes memes so seemed fitting 😎

[@ThomannsGuitarsBasses]

Ok boomer. (sorry that was too easy haha) Indeed included loopers in mutieffects usually have to share a lot of processing power, and too often sacrificing both sample rate and quality in the process. If you want to have more freedom on the looping side a seperate box for looping may be the way to go :) // Guillaume

[@nichreynolds7712]

Sounds like you have the looper at the start of the signal chain. Put the looper last in the signal chain or when u change sounds it will change the loop. Rember..you want the loop repeating the effected sound. You do this by putting the looper at the end.

[@PooNinja]

Lovely loop lesson , layer after layer like a sweet vidalia onion of your own variations. Pre looping is a great way to dial in your tone controls.

[@CelZeek]

Hello Guillaume ! Thanks a lot for this video ! 😃

[@Punchitpedalboards]

Love this video. Where did you find the DB meter?

[@liaisons6227]

Great tips, and Guillaume I really like your guitar playing and sweet tones! 👌

[@erikkiekens3906]

Txs some nice info Personally using a Voice Live 3 Extreme because of the great vocal effects but the tips and tricks are just as usefull on that looper!

[@ralphculham4669]

Great instruction. Just curious what digital sound meter is that?

[@vio4jesus]

Was that DB meter on top of the Orange amp? IF.... it is decibel meter, who makes it? Thanks, Thanks, Thanks, Thanks, Thanks, (looped it)

[@batsumoto]

Been having fun with my rc 500 since yesterday. Im now 11 songs in and haven't eaten or slept as much as I should have. Great piece of gear though.

[@jennifercarss]

Thank you very much 😊 I'm a total beginner with a loop and I'm trying to enjoy the process and not throw my guitar out the window when hearing my bad rhythm and terrible riffs 😂

[@ThomannsGuitarsBasses]

Haha, yeah guitars usually don't land on their feet so better keeping them inside. Have fun! :) //Kris

[@alberttremonti7230]

When will we be able to get Harley Benton products shipped faster to the U.S.? I really want to purchase a guitar and bass, but don't feel like waiting months to receive it. Thanks and I'm totally digging all the video content you all at Thoman put out.

[@thornil2231]

I have a question for everybody: Do you know of a looper with 4 different outputs? I have RC3 and an old AC 30 and a new tweed. I can loop one guitar on each amp. Sounds great. Now I want to be able to do the same with the bass on the bass amp and a drum on a separate amp. Any idea?

[@otraperspectiva]

Try looking at the 45500 pedal from ehx. Maybe two of those ?? There is also the 95000. Or maybe a conventional stereo looper with ehx parallel mixer pedal?

[@thornil2231]

@@otraperspectivaThanks, I looked at that, but they don't have 4 output. It is a tricky thing isn.t it? LOL

[@juventus8269]

Very helpful video, thank you. This helped a lot.

[@MovingBlanketStudio]

i like the increasing volume tip

[@Steven_SK]

Nice vid!

[@eddiekent1997]

Thank You

[@AudienseAudiovisuel]

Sinon ça dérange pas trop d'avoir les démos hors phase ?

[@goodandbadtimes]

Phew! Thanks Guillaume.

[@JakeSavich]

Awesome tips mate

[@ThomannsGuitarsBasses]

Glad you enjoyed jake :) // Guillaume

[@ashlingley6569]

my problem is that i cannot get a clean loop. theres always a delay between the start and end and i cant time it correctly:(

[@juliorn1243]

Same my foot is just to late every time 😭

[@oxytocin5705]

Tap your foot to the rythm while you're playing all the time. Tap on every quarter note... then, when you want to press the loop pedal, you just shift your foot to the pedal while it is already tapping. So you are playing your riff one or two times BEFORE you start looping and tap your foot like you're the king of groove. This helps a lot to get the timing right.

[@stefanos7724]

Play like 4 bars before starting instead of trying to start as you are stepping on the pedal. Then you can just play through the riff once and when you are back at the beginning just step on the pedal as you are startnig the riff again

[@lafemmeparallel]

Same :(

[@benfouche8054]

If u play the idea you want to loop before looping it for like 4 bars or until the rhythm and tempo is in your head. then on beat one tap the loop pedal and record the section then once your phrase is done tap the pedal on beat one again. this makes a clean loop.

[@jamesnicholson9392]

I own the same pedal RC-1 Boss loop station, why can't I record clean and play heavy over top when I change from clean to dirty,so does my backing track.I only use a line6 with clean and dirty???James Nicholson,Ontario,Canada!!!!!

[@ThomannsGuitarsBasses]

Hey James thanks for watching and for your question! Are you using the gain from your amp and is your looper placed in between your guitar and the amp? If so that explains why everything gets distorded when you switch channels on your amp. Try placing the looper in the amp's effect loop in the back and that should solve it :) // Guillaume

[@eddiekent1997]

I"m getting iT

[@FranciscoAndrepg]

Is that strat for sale? :D

[@ThomannsGuitarsBasses]

Haha I'm afraid not Fransisco I'm sorry ^^ You could however order the same specs at the Fender Custom shop :) // Guillaume

[@phil6702]

What about if I could not adjust the volume? Somebody got some tips?

[@MrBluexmas]

Nice socks where did you buy them?

[@boomerbassmeme]

Right? His sock game has been strong the last couple vids!

[@MrBluexmas]

boomer bass meme French fashion sense yay

[@Steven_SK]

Hmmmm Kris is probably barefoot right about now!

[@ThomannsGuitarsBasses]

Hahaha thanks guys, I think I got these for Christmas so not too sure where they come from sorry ^^// Guillaume

[@owenimholte3835]

Mmmmmmm "playing 2" is so tasty!

[@xWatermelonsx]

Nice socks sir! :D

[@jamesduckworth9117]

Nice socks