Thanks again. Started this new hobby 5 weeks ago. Am on my second batch. My FIRST batch will be fridge/taste-tested in a week.
@HomeBrewNetwork2 жыл бұрын
Good luck! Cheers!
@neileyre60192 жыл бұрын
Hi Gerald, I’m a recent starter too. I will say that I’ve found that bottled beer will improve over time in the bottle and I’ve found a minimum of 3 weeks to get a good result. I’m using the carbonation drops, dead easy!
@planeair1004 жыл бұрын
I will add this. I use the EZ flip, grolsch style bottles. I can bottle a five gallon batch with 20, 32 oz bottles. The beer is portable unlike a keg and never goes flat, even if only partially consumed.
@anandpanchbhavi4 жыл бұрын
Good to see an Aussie doing a video with local links. Thanks
@HomeBrewNetwork4 жыл бұрын
No problem 👍 Cheers!
@PatrickG45312 жыл бұрын
Watched this video a few weeks ago. (Been making wine for several years, bottled first batch of beer just before watching this.) A couple weeks after watching, ordered: a bottle washer, bottle rinser (vianator?), and a bottle tree. Just came today. Searched for and came back to this vid to say "Thank you." Washer does better job in seconds than I could do in minutes before. The one I got has an end that can easily be also used for siphon tube. Total was just over $50usd. HUGE DIFFERENCE! Thanks again.
@HomeBrewNetwork2 жыл бұрын
Glad I could help mate , cheers!
@Glyn777775 жыл бұрын
The hose on the bottling wand is genius, I'm definitely doing that next time. A great tip is to bottle over the open door of your dishwasher if you have one. Catches all the drips and to clean it, you just close it.
@HomeBrewNetwork5 жыл бұрын
Good tip mate, cheers!
@tazsnuts993 жыл бұрын
I catch my drips on old bakers sheet
@michaelpage59933 жыл бұрын
Another Tip !! on your bottle sanitiser/washer put a flat washer ( stainless steel ) snug fit over the bit that the bottle pushes down on to squirt ( as there are three small lugs there that the bottle pushes down on. They wear out when using glass bottles as they are plastic( plastic bottles are fine and don't need a washer)and eventually ruin your washer in a short time ! The top of the bottle then pushes down on the flat washer not wearing the lugs out .A tip I learnt from my local Brew shop .
@marshax4 жыл бұрын
Best bottling tip video I have seen on youtube. Thanks!
@HomeBrewNetwork4 жыл бұрын
Cheers mate, thanks!
@TomasJJ01044 жыл бұрын
You forgot a very important tip, ALWAYS have a fresh cold brew in hand whenever bottling or brewing! Ripper mate
@HomeBrewNetwork4 жыл бұрын
hahaha Yes of course! Cheers Tommy
@terrytwoteef4 жыл бұрын
After 5 years, my brew partner and I still agree that the Jet Bottle Washer is the best/most cost effective purchase we've made. it cleans bottles, kegs, carboys, buckets, siphons, lines and easily hooks up to the outdoor hose or threaded faucet. Even if you aren't bottling, it is a necessity for home brewers and only costs $15.
@robertguay3773 Жыл бұрын
I have used the pump and rinser in the past but now I just use 2 sinks one with sanitizer one with water and soak them for about 1 min. it goes really fast. Dont forget to sanitize the caps.
@bernardwilson2 жыл бұрын
Greatings from the UK. Excellent video Cheers
@HomeBrewNetwork2 жыл бұрын
Thank you! Cheers!
@BionicMerlin Жыл бұрын
My new Vinator bottle washer didn't work at first. I had a good look at it, and discovered they had installed the check valve backwards. Flipped it around and it worked fine.
@angowT3 ай бұрын
6. A wife to do the syphoning while i cap them. Good channel, greetings from UK.
@HomeBrewNetwork3 ай бұрын
Nice 👍Thank you!
@mark9378 Жыл бұрын
Awesome video mate. I'm going out today to buy the brass bottle rinser and the vinator. So helpful, Cheers. 🤙🍻🇦🇺
@HomeBrewNetwork Жыл бұрын
No problem 👍
@CountDrunkula5 жыл бұрын
Fantastic one, mate. Star San removes an extra swilling step and that's a very good thing. Here's my extras: * Put a torch on an upturned pint glass behind the bottles so you can see the fill level in the bottle. So many of the bottles I've got are so dark and whoops, sticky floor. * If you've got a wing capper as you're filling the next bottle slip on a cap and put the bottles in a line, then you can do what I call a "bombing run" and walk over the top of them, straddling the line and capping - it's like you're doing bench presses upside down. I find it even quicker than a bench capper. Oh yes - the towel on the floor, good man. So many times I've got some spillage and then the bottles leave sticky rings on things. I always mean to put everything on a tray, never do. Cheers.
@HughRogers6094 жыл бұрын
Good tip on the hose and wand instead of the tap.I don't mind bottling. But if one thing made a difference for me, it was bulk priming. Sugaring 4 different bottles was a pain. Now I just add 160g plain sugar into the FV, stir, leave it while I clean the bottles. I started capping and that is slow with stubbies, when I've been used to lids and flip tops with bigger bottles. Won't be doing to many stubbies in the future.
@cogeek797 Жыл бұрын
I will put a baking sheet under when I bottle or even easier open up the dishwasher and bottle over that. The door isn't strong enough to hold a whole case of bottles but if you are only bottling a gallon and kegging the rest it saves the floor from getting sticky.
@motteherald3 жыл бұрын
Brilliant video. I just sent my friend a birthday package of bottling gear that was directly influenced by this video! Didn't get the capper or the jet bottle washer but the tree, dispenser, bottling wand and a siphon to use it with are all inspired by you 😉 Happy brewing!
@MikeP3503 жыл бұрын
I brush out my bottles and use my high heat dishwasher with no soap to sanitize my bottles, combines tip 1 and 2. I have 12 oz bottles, but the flip top 32oz bottles also save a lot of time. Cheers 🍻
@rfldss893 жыл бұрын
If you dont wanna get a bottle tree, you can also use the bottom rack of a dishwasher!
@michael-qq3gw3 жыл бұрын
Some handy tips I love the hose idea the next thing I'll be doing. I put my milk crates on an angle that way you can stack the bottles without them falling over because I don't have a bottle tree 🎄 then I also use my milk crates to carry the bottles and stack them. I still use a sugar scoop and the best bottles are grolsch flip top bottling is so easy not having to cap👍🍻🍻🍻
@LJV13B5 жыл бұрын
Top video Gash, I’ve been bottling for ages and use those techniques but I’ve never seen that tap bottle rinser before that’s awesome! Cheers🍺
@beefa56495 жыл бұрын
Good one mate.........yes, the hose on the end of the bottling wand, from the bottom of the fermentersaurus certainly made my process easier....and i definitely agree with the other 5 time saving tips.....cheers
@Jeff_MT095 жыл бұрын
Thank you for the valuable information and demonstrations. I bottle exclusively and I have all the equipment you displayed, with the exception of the silicone hose and the bottle washer. You are so right about being organised! I actually rinse my bottles directly after drinking and them stand upside down on the sill of the kitchen sink and transfer to bottle tree the next day. I also wash my bottles in warm water with SaniAid the day before bottling. One more item I have is a bottle brush, which I have cut the loop off the handle and use it in my battery drill to thoroughly wash bottles in the SaniAid before rinsing. Thanks again. Cheers. Jeff
@HomeBrewNetwork5 жыл бұрын
Great ideas, thanks for watching Jeff, cheers mate!
@harvey79915 жыл бұрын
I'm still very new to home brew but bottle tree is a must have. I was like you... $62 AUD (tree for 63 bottles + vinator) doesn't seem worth it, I can make do. But I ended up getting one with some spare xmas cash. Now I'm of the opinion that ANYTHING that streamlines your brew / bottling day is a must have, less stuffing around more drinking. *Adds bottle rinser to cart* only item I don't have. Cheers
@HomeBrewNetwork5 жыл бұрын
Anything to make it easier, Cheers Harvey!
@mrlazee6015 Жыл бұрын
The best bottling video
@HomeBrewNetwork Жыл бұрын
Thanks 👍 Cheers mate!
@cheshirehomebrew5 жыл бұрын
Great tips,I normally rinse bottles under the hot tap straight after use and then bang them in the dishwasher by themselves using the hottest setting the day before a bottling day and then sanitize on the day. A video on cleaning pumps (especially budget ones) would be most useful. Cheers mate 👍🍺
@HomeBrewNetwork5 жыл бұрын
Hmm cleaning pumps.. I'll have a think mate, thanks for watching!
@mnkybndit4 жыл бұрын
I cant believe I never thought to put the wand on the end of the siphon....Cheers mate.
@hitthehighway3 жыл бұрын
Thanks for your vid - bottled up first batch yesterday evening and with the bottle tree was a breeze.
@bunter97824 жыл бұрын
i have been doing the hose idead for about 19 years, i use 750ml bottles and have them in a milk crate and bottle them while they sit in the crate. i also use a 60l crate half fill it with sanitized water fits 6 750ml bottles at a time faster way of doing it
@HuntsmanBrewing5 жыл бұрын
Solid advice mate. Cheers
@HomeBrewNetwork5 жыл бұрын
Cheers mate!
@DamoLawrie5 жыл бұрын
Nice PET bottle close up with the brass jet washer too #bigceleb xpa was its contents if I'm not mistaken Mind you that jet washer looks handy
@HomeBrewNetwork5 жыл бұрын
hahaha glad you noticed, product placement hahaha Cheers mate!
@DamoLawrie5 жыл бұрын
@@HomeBrewNetwork 🤣🤣🤣
@captainnibby3 жыл бұрын
I fell into the kegging is easier category... but I do a lot of one gallon batches for either experiments or for my wife (which are all bottled) so this is all still great to know- thanks!
@melhaer4 жыл бұрын
Cool video, I am using almost the same steps, but always takes a lot of time. Only difference is I am attaching the bottling pipe not to the hose, but to the fermenter's tap, so I am moving bottle to the pipe, not pipe to the bottles;) May be I need to try your technique. Also, between tap and pipe, I am placing a filter. One way to make it faster is using swing top bottles - this will save some time with the caper.
@carbonbased72914 жыл бұрын
And swing tops produce no waste! I'll never use caps. :)
@jamesbeutler5465 жыл бұрын
Timely upload Gash! Bottling my first brew this weekend. Looks like I’ll be hitting the local home brew shop for a bit of silicone hose first though. Thanks for the quality content mate.
@HomeBrewNetwork5 жыл бұрын
Cheers James, thanks for watching mate
@mccartc76455 жыл бұрын
I don't have the space or money for a corny keg setup so I started last year replacing out bottles with mini kegs. I have a little minikeg tap with co2 bulbs to keep the kegs pressurised. I still always bottle some of the batch for sharing and if I want to take some away somewhere but its no problem for about 10 bottles.
@HomeBrewNetwork5 жыл бұрын
As long as you can get the mini kegs cheap-ish that is great! They can be quite pricey some times. Cheers Conor, thanks for watching mate
@DiegoRodriguez-pr1bf5 жыл бұрын
This tip works to let you bottle in the sink instead of on the floor. Get a milk crate or a sturdy box and put the bottling pail on that next to the sink. Use a very short piece of hose for the bottling wand or just go straight from the spigot on the bottling pail. I brew small batches, so it's easy to lift the pail onto the box. Maybe it will be too hard if the pail is really heavy? If you can do it you won't have to be on the floor and there will not be anything to clean when you are done because the bottles will be filled in the sink.
@HomeBrewNetwork5 жыл бұрын
Yeah that is a good tip, although you're right also, gets a bit of a struggle lifting 6 gallon/ 23 Ls up that high sometimes, I'm getting old mate hahaha Cheers and thanks for watching!
@mikemotta97545 жыл бұрын
Great tip on the pump. that's the one thing that i'm missing. Great info.
@Niksan19745 жыл бұрын
I bought a bench capper yesterday after I was bottling a current batch and I hit some donated bottles that have a shorter top kneck where the hand capper use to clamp the cap on to the bottle. Ruined the day that did so glad it happened on a small batch, though.
@garykelly75883 жыл бұрын
Gash great tips. Thanks very much.
@HomeBrewNetwork3 жыл бұрын
No worries! Cheers!
@hardyardsbrewers12255 жыл бұрын
Cheers Gash, I bottle from the keg with my own home made counter pressure filler but still need pretty much the same kit. I've got the bottle tree and the bottle sterilizer and a good bench capper but will look at a jet washer for my bottles, looks ways faster 😎 thanks for sharing this im sure plenty of people will have learnt from this vid. Cheers Mate, Mike 🍻🍻
@ausfoodgarden5 жыл бұрын
Nice idea giving some top tips like that. My tips for bottling would be: 1, buy some kegs ... you know where I'm going :) I only do the odd few bottles now but still think it's a pain. Good video Cheers!
@HomeBrewNetwork5 жыл бұрын
Hahaha Cheers Gerry, thanks for watching mate!
@PeerensClement2 жыл бұрын
good tips, thanks!
@HomeBrewNetwork2 жыл бұрын
No problem!
@renturner875 жыл бұрын
Wow so much information jammed into that 😍 Think i might have to build a bottling station designed around those ideas mate cheers 👍
@HomeBrewNetwork5 жыл бұрын
Thanks for watching mate! Cheers!
@tomwilliams3645 жыл бұрын
Looking good Gash, the coopers reusable plastic bottles and caps also save a lot of time
@HomeBrewNetwork5 жыл бұрын
Very true Tom, Cheers mate!
@bjorn34385 жыл бұрын
They also tend not to explode. I had a whole batch of glass bottled wheat beer explode in a box in a closed cupboard and still sprayed glass shards and beer a good 6+ metres across a room. Stale wheat beer is not a good smell!
@Abbynorml19794 жыл бұрын
Thank you. Weird how hesitant I am to spend a bit more. Definitely need to get the tree, pump, and a good capper. I'd brew a lot more, but I loathe bottling day
@terrytwoteef4 жыл бұрын
I wasted a bunch of time building my own, but the bottle tree or bottle rack is so much better. We ended up getting a bunch off of craigslist deals
@rfldss893 жыл бұрын
People who just recommend getting a keg when people ask for bottling day tips are kind of missing the whole point of homebrewing, and that's sharing. It's generally much easier to share your brews with people when theyre bottled
@DullahanBrewing5 жыл бұрын
Great idea revisiting the beginners how to videos,helps having everything in one place. Maybe next one you could touch on fvs,how to clean them and how long they last before you need to replace them or bits like taps and syphons etc. If you don't use them for a couple years but they are clean should you still throw them out? Anyway hope the family is well aunty Peter too. Cheers.
@HomeBrewNetwork5 жыл бұрын
Thanks Greg, hope you're well mate! Cheers!
@joenice2422 жыл бұрын
The No 5 bottle rinser can easily break the faucets neck if you push too hard. Otherwise stellar advice.
@walruss605 жыл бұрын
Thanks for the tips Gav, I've gotta get one of those bottle rinsers, thanks mate and cheers
@HomeBrewNetwork5 жыл бұрын
Cheers Keith!
@eddieslittlestack7919 Жыл бұрын
Great tips. Helpful. You get a like.
@HomeBrewNetwork Жыл бұрын
Much appreciated! Cheers!
@micmacmoc3 жыл бұрын
Nice one bud!
@HomeBrewNetwork3 жыл бұрын
Thanks for the watch, cheers!
@StassBrewing5 жыл бұрын
Cheers Gash - some great tips there!
@ad4m3rson3 жыл бұрын
Great video mate
@bradliano15 жыл бұрын
Great video! I'm fairly new to the home brew world and I must say bottling is by far my least favourite bit. Thanks for the headsup about the bottler, I was just about to buy one of the ones you said were no good.
@HomeBrewNetwork5 жыл бұрын
Cheers mate, thanks for watching!
@robertsouthernsouthern55242 жыл бұрын
If you put priming sugar in beer barrel 1st can you fill bottles in couple of weeks please
@markironmonger2232 жыл бұрын
Me: "I'll just watch this to reassure my knowledge after nearly three decades of bottling homebrew" Ten minutes later buying plastic things from Kegland. Seriously though, I've always just put up with clutter and mess by trying to organize as much as possible, the bottle tree and rinser suddenly look invaluable. Thanks!
@nickhenley80405 жыл бұрын
Top tips.
@Ken_H_5 жыл бұрын
Good stuff fella 👍🍻
@HomeBrewNetwork5 жыл бұрын
Thanks Ken, and cheers to you!
@naughtyneill65075 жыл бұрын
Good ideas!
@finnroohomebrewing5 жыл бұрын
Great video. Cheers mate.
@HomeBrewNetwork5 жыл бұрын
Cheers mate, thanks for taking the time to have a look! Means a lot. Cheers!
@paskrell3 жыл бұрын
Why would you not put the bottles to the dishwasher at high heat instead of sanitizing? Mine fits over 40 bottles
@donaldunne74333 жыл бұрын
Plastic pet bottles or glass for home brews ??? Is plastic the wrong way to go?
@lekcom625 жыл бұрын
Great video thanks mate
@HomeBrewNetwork5 жыл бұрын
Thanks for watching, Cheers!
@Schikitar5 жыл бұрын
Another free tip: get your kids to help, my daughter became a bottling expert! ;)
@HomeBrewNetwork5 жыл бұрын
Great tip hahaha Cheers!
@GregoryKodolanyiRitter5 жыл бұрын
Cool video, cheers!
@HomeBrewNetwork5 жыл бұрын
Thanks for watching mate!
@ForgetU4 жыл бұрын
Here's a awww, I hope. 9:20 don't pull bottle out and the twist and plunge again, just twist while under the bell then plunge the 2nd time. Hope this is helpful.
@HomeBrewNetwork4 жыл бұрын
Cant do that with this one the bottle gets stuck, I changed the bell a few years ago, but still does it. Must the size of my bottles. Cheers and thanks!
@ForgetU4 жыл бұрын
No problem... I get away with not having to remove the bottle... I don't remember the size of my bell.
@davidphilion14322 жыл бұрын
Hi gash. I'm going to bottle condition my first lager. I cold crashed it for 3 weeks and plan to bottle condition at 20c. Do you think its necessary to add a small amount of yeast or just bottle with corn sugar and not worry about it ?
@campdavidsonfunctionaltrai85833 жыл бұрын
do you rinse bottles in the sink then Sanitise them on brew day?
@journeyfortwo52113 жыл бұрын
Great video, I found it very helpful, but I think a better title would be 5 PRODUCTS to .... rather than tips
@JoshSinnott974 жыл бұрын
What are your thoughts on the glass clip top bottles with the rubber seal? Seen a few people using them and surely removing the capping stage would make life a bit easier. I'm about to convert from pet bottles but was wondering how those hold up against carbonation. Would hate to spend all that time and money just to find they don't keep the glass pressurised as well as crown seals
@ellstamann3 жыл бұрын
A lot of people love grolsch style bottles. I’ve got some but haven’t used them yet. If second hand generally good to get new seals.
@tazsnuts993 жыл бұрын
Fast rack is much better then the bottling tree
@benmartin76164 жыл бұрын
Nice video, but I have to say that I have only used the wing style cappers and have yet to break a bottle. IMO this is one of the bigger myths in brewing.
@HomeBrewNetwork4 жыл бұрын
The wing capper depends on your bottles, I can say from experience some bottles just dont like wing cappers. Bench cappers work with everything from screw tops to champagne bottles. You can get by with a hammer capper if you like, but much safer with a bench! Cheers!
@HomeBrewNetwork4 жыл бұрын
The other thing is, screw a bench capper down, its one handed,, so much easier than a wing capper
@HomeBrewNetwork3 жыл бұрын
@Marc Zbigniew Bench cappers are the best and always will be, wing capper doesnt come close, there is no substitute, shit I started with the hammer capper, I've tried them all. Bench capper is the only way. Cheers!
@HomeBrewNetwork3 жыл бұрын
@Marc Zbigniew 2.5L is fine, but its if you're going to drink 2.5L in a session because once you open it, its going to be needed to drank in at the most a few days, otherwise maybe flat.
@aorakiboydog5 жыл бұрын
Blast from the past , sold all my gear now I have to buy some more as I miss some styles bottled , great video .
@HomeBrewNetwork5 жыл бұрын
Yeah handy to bottle a batch here and there, Cheers mate, thanks for watching!
@eternaldrive4 жыл бұрын
Tip no.6 get a kegerator JK. Amazing how many brewing tools you think no I don't need that. Eventually you buy them and say why didn't I get it sooner. The old fill and shake routine after pouring your beer goes a long way.
@Robshee264 жыл бұрын
Another tip is to prime the entire batch, will save heaps of time priming every bottle with carbonation drops
@HomeBrewNetwork4 жыл бұрын
I've done a video on that, its ok for some beers, personally I wouldnt do it with hoppy beers like IPAs and NEIPAs they get oxidised too easy, but big stouts and belgians etc for sure! Cheers mate!
@victorbitter5835 жыл бұрын
Good stuff Gash. @3:56 that's a flash bottle mate. I wonder where you got that? Cheers Bro.
@HomeBrewNetwork5 жыл бұрын
Hahaha chose that one specially to see if anyone would notice :)
@victorbitter5835 жыл бұрын
@@HomeBrewNetwork I might have to brew that again soon. You keen for 1 more?
@HomeBrewNetwork5 жыл бұрын
Bloody oath mate! :D
@victorbitter5835 жыл бұрын
@@HomeBrewNetwork I'm chuffed that you thought that much about it to use it. Cracking beer! If I do say so myself. The boys put a great recipe together for that one. At the time, it was the most complex brew I had done and it really made me realise that I could actually brew! Extract n all. cheers.
@thecaw4 жыл бұрын
Hey mate.Where can you pick up silicone hose and what size?
@HomeBrewNetwork4 жыл бұрын
Any decent home brew shop should have it, size is dependent on what tap your are attaching to etc, there are two main sizes 12mm ID and 10mm ID, 12mm is easy to find the 10mm a little harder. 12mm bit.ly/12mmSiliconHose , 10mm www.grainandgrape.com.au/products/category/LEMRTMKG-pumps-siphons-and-tubing/7HOSE%209MM%20SILICON--hose-tube-silicon-10mm-id-premium Cheers!
@TBRHIPHOP5 жыл бұрын
I could be wrong but, Is that a lapel mic I see? 😎👍🏼
@HomeBrewNetwork5 жыл бұрын
Yeah, its a cheapy, its my 4th try at a cheapy, this one seems ok, cheers mate!
@TBRHIPHOP5 жыл бұрын
Good to hear. (Pardon the pun lol) It was much easier to listen to and felt really polished. Nice effort. Keep up the good work. 😎👍🏼
@zt74895 жыл бұрын
Has anybody had any issues with putting sanitised bottles on an unsanitised tree, how is the tree kept sanitised?
@HomeBrewNetwork5 жыл бұрын
You just spray it down if you're worried, as long as its clean just the sanitiser from the bottle is probably more than enough, although it doesnt hurt to spray it down before each session. Cheers mate!
@Coop.de.ville.5 жыл бұрын
Mint
@HomeBrewNetwork5 жыл бұрын
and cheers to you!
@Coop.de.ville.5 жыл бұрын
@@HomeBrewNetwork The bottle rinser is a beauty, Just brought one that will save so much time mate.
@darrendwyer99814 жыл бұрын
So...in terms of putting the beer into the bottle, I sit on a chair, have the bottle wand connected direct to my brew vessel and enjoy a "froffy" as I am bottling...you, have the connecting hose, are on your knees and frankly...I failed to see the advantage but more so, I think your approach is a HUGE disadvantage.
@HomeBrewNetwork4 жыл бұрын
I did it like that a few times but couldn't reach all the bottles, and I found this easier and faster. I bottled for over 20years and I've tried all sorts of ways.. For some its good to put the fermenter on a crate on the bench, so you get that extra height and can stand up, but my back is too stuffed to be lifting 6 gallons of beer that high, whatever works for you mate. Have a good weekend :) Cheers!
@mra9xss5 жыл бұрын
Cheers........ 17!
@HomeBrewNetwork5 жыл бұрын
hahaha Cheers
@Photologistic3 жыл бұрын
Don’t use twist top bottles.
@donaldblankenship80579 ай бұрын
My wing capper is just as easy, costs $20 instead of his $200 monstrosity.
@HomeBrewNetwork9 ай бұрын
Wing cappers? They aren't good for reusing some commercial beer bottles at all. If you're paying $200 for a bench capper you are being ripped off... Cheers!