5 Troubleshooting Tips for Natural Gas Dehydration Equipment When You're Not Meeting Dew Point

[@depmaudoofal74]

The series of videos you all provide have helped in countless ways. I sincerely appreciate it.

[@KimrayInc]

Thank you for letting us know it has been helpful to you! We love hearing that feedback. We'd also love to know any other questions you have or topics you'd like us to cover in the future.

[@IrfanKatpar]

Thanks Kimray. You are really helpful to troubleshoot DHU issues.

[@tanieladolodai7392]

Appreciate the knowledge shared.

[@engmajidspark]

what is different between water dewpoint and hydrocarbon dewpoint

[@KimrayInc]

Dew point is defined as the temperature & pressure at which vapor begins to condense into a liquid. When water reaches its dew point, the water vapors are condensing into a liquid (water). When natural gas reach its dew point, the hydrocarbons are condensing onto liquids (condensates).

[@ManikandanTamilan]

What could be the reason for lean teg water content higher from regenerator. Reboiler liquid is is at 204 C, stripping gas is full as per design flow. Natural gas from absorber is on spec. Only offspec is lean teg water content from regenerator, what could be the cause. Any tips to troubleshoot this. Plant load is only around 80% capacity.

[@shunmugaganesh8697]

My working gas plant having TEG more loss due to something. Can you guide me by suggestions

[@KimrayInc]

Please contact Kimray or Kimray International to speak with a representative and we would gladly help you figure out the issues you are having with losing glycol. You can find your nearest support on this webpage: kimray.com/contact-support

[@eng.faisalsaad3746]

❤