$500 FORD F250 6.9 IDI Diesel - Electronic Fuel Pump | No More Hard Starts!

This is PART 4 of an ongoing series. Today we chase down the reason this truck has had hard starting and power loss issues, and install an electronic fuel pump!
If you haven't seen parts 1, 2, or 3, check those out below!
$500 FORD F250 6.9 IDI Diesel - An Introduction : • $500 FORD F250 6.9 IDI...
$500 FORD F250 6.9 IDI Diesel - Starter Replacement, Will it Run?! : • $500 FORD F250 6.9 IDI...
$500 FORD F250 6.9 IDI Diesel - Glow Plug System Overhaul :
• $500 FORD F250 6.9 IDI...

[@cylayton7686]

I tried a cheapo version of this and it worked for about 8 months. I have since gone back to mechanical pump with a one way valve right in front of the inlet. I have no regrets...

[@HarrisT]

Good to know! I’ve heard of some people on the forums doing both mechanical and electric with a valve to swap… maybe in the future…

[@ProducersGroupProd]

You are very thorough! That means A Great Deal! Thank You for all the thoughtfulness!

[@danielbrooks5202]

Thank you for this having issues with my dads truck and this worth testing

[@carllindstrom8217]

love your videos, keep the content coming, especially on the diesel

[@HarrisT]

Thanks for tuning in 👍 I’m gonna be working on the truck this weekend… if all goes to plan I’ll have another video out soon!

[@ericshepherd8206]

That truck was top of the line in its day. Cool truck

[@mwilliamshs]

It's an XL according to the dash. Not top of the line as it's less than an XLT and Lariat.

[@HarrisT]

I believe the badge on the side says XLT, but I'm not sure. I'll check when I have a second

[@mwilliamshs]

@@HarrisT fenders get changed a lot easier than dashes

[@HarrisT]

@@mwilliamshs Very true, I doubt anything has been changed on this old thing though haha. I know the motor was rebuilt when the first owner tried to drive it over a flooded bridge but that’s about it. Maybe a fender or dash was part of that swap, who knows. Good eye though! 👍

[@mwilliamshs]

​@HarrisT still not "top of the line" as it's got manual windows. The top model in those days was the Lariat.

[@rollingthunder6204]

Looking forward to more! I myself am eyeing a 87 ford with the 6.9 but time will tell though.

[@HarrisT]

If the price is right you should go for it 👍 they’re cool trucks!

[@rollingthunder6204]

I’m thinking of offering 500 or 800 bucks because the whole motor needs all new seals she’s leaking oil and Diesel out of where it can so it’d be a pull the motor out and all new seals and maybe at that point but new rings in it after a good honing. She’s got the 4 speed stick as well

[@HarrisT]

Nice! This thing is completely coated in oil underneath. Someone told me once, "if it leaks oil, it has oil" and thats good enough for me. haha

[@rollingthunder6204]

There is truth in that. But also it means your spending that much more in money to top off fluids and that’s if you catch it before it blows the motor up or whatever else lol but I digress

[@HarrisT]

@@rollingthunder6204 for sure. My commitment level with doing a full teardown to chase my oil leak is pretty minimal at this point though haha. I just want the damn thing to be able to drive at this point. Working on part 5 right now 👍

[@phillipbremer7715]

let put it nice keep it stock little at time do little this little that lot guys saying same thing glad you put it out thier like this learning video my self their good for prime cheap the more you pay the more you play just my 2 cents or ten cents everything front to back got check check recheck i can see lot that truck going need some stuff good start grease everything yes dont need it now but better to have it seal kits let this sink in axle rear locker a u joint pionon seal both four total and bearings axle seals lines brakes whole thing each system coat it replace hardware bolts grease threads rust rust rust

[@benjaminhaygood]

You mention a water separator on the other side of the engine can you show where that is? I have an old 6.9l and I’m just trying to learn more.

[@tri5garage544]

That water separator is at the far left side of the firewall. It’s non serviceable and very prone to leaks. I’m swapping in a different water separator filter setup because I’m pretty sure mine is causing air intrusion again.

[@HarrisT]

What setup are you planning? I’d like to upgrade mine

[@esqueue]

Volume way too low. If I need to raise it to a certain level, I just avoid the video. Just letting you know.

[@HarrisT]

Thank you!