500+HP V8 HONDA GETS MORE POWER!! FINISHING THE CUSTOM HOT ROD CRX! TURBO?!

[@CaseysCustoms]

PLEASE LIKE THE VIDEO!

[@joeyzawacki1375]

Just ordered my sticker Let’s Go 👍🏻 , U crack me up doing burnouts at 1 in the morning ur neighbors must hate u 😂😂

[@eric5250]

Seriously man, I’m not a salesman but type in cheap Chinese diesel heater. Get that stinky piece of crap out of there. Couldn’t you fabricate a thermostat housing with a lower profile?

[@CaseysCustoms]

@@eric5250 I’ll take a look at them!

[@daboenterprize8265]

Definitely coming together 🎉🎉🎉❤❤❤❤

[@hardcorebestnlrccarbuilder]

3.45 put them logo's in the door jambs just like alat of cars have an logo there @@CaseysCustoms

[@skaughtmc6591]

The neighbors at 2am: “Casey got his car running. Good for him!”

[@CaseysCustoms]

@@skaughtmc6591 🤣🤣

[@pigidly]

The Casey Custom signs would make nice sill plates when you open your door.

[@canucklehead8053]

Thought the same thing when I saw them!

[@dray85too]

I came to say the same thing. Awesome idea

[@CaseysCustoms]

@@pigidly damn that’s a good idea!

[@deadly_dave]

@@canucklehead8053 As did I

[@timwikblad6119]

that was my first thought too

[@terryhenry4432]

The Casey customs aluminum badges would look so sick as door runners. So you can only see them when the door is open.

[@cosmofloody5680]

That was an awesome !!!! Never thought I’d see a rear wheel drive CRX do that .. 👍

[@shloopter30]

Winch. Great idea. I mounted my winch to a plate with a hitch register. I can put it on the back of any of my vehicles when needed. Also put a hitch register on the front of my trailer so I can use it there too. Stay cool!

[@jeremiahgarcia8861]

That burn out was so badass , I love the build so much your killin it man 👏🔥

[@Nonayabizness360]

That super oil cap missile launch was epic! Extremely positive ventilation!😂

[@CaseysCustoms]

@@Nonayabizness360 yea not a good idea to have no vacuum lines open and the engine sealed 100% 🤣🤣 ooops!!

[@seanwilliams3377]

Maybe needs some kind of crankcase ventilation, PCV valve? Pretty sure your not suppose to blow the oil cap off.

[@workingmansrestorations7071]

Was wondering same thing... she sure has alot of pressure

[@CaseysCustoms]

@@seanwilliams3377 yea i have one but in the rush to hear it run i threw a second oil cap on like an idiot, also have no vacuum lines open right now. So very dumb lol

[@jaredshoemaker9196]

Not gonna lie I'm not a crx fan but the stance on yours is badass. The headlights and everything just looks right. Caseys Customs sign on the dash somewhere. Best of luck. Take Care!!!

[@TrulyBlessedHighlyfavored]

Casey, you should paint your jams if you plan on changing the color

[@CaseysCustoms]

@@TrulyBlessedHighlyfavored what made ya think we weren’t? Lol

[@Axyl00Druss]

@@CaseysCustoms Maybe he just wants you to finally paint it.

[@blahblah4125]

Just a suggestion, but couldn't you use a 90 degree water neck instead of that one that sticks up to high? It might give you an extra inch or 2 hood clearance now that you have a lower profile EFI.

[@CaseysCustoms]

@@blahblah4125 i ran 3-4 different ones and none of them helped much. Also any lower then the intake will trap air so it’s kinda a necessary evil at this point

[@MikeSchmidt-qt7ls]

Watching the valve cover cap blow off was wild

[@victorthecarguy3126]

I once bought some ugly wheels to test fit backspacing. That tool looks really useful. Buy a used tire and put it on the tool to test fit, if you leave the spring out it's easy to move the suspension around.

[@380.motorsports]

I’m sure I commented about using the winch. Not sure if I was the first. Definitely take a few minutes and mount it solid to your back wall. I use mine all the time to get cars in and out when working alone.

[@That-1-Dad]

I would check all 4 corners for wheel fitment just in case things aren't as square as you think

[@ArjayKumar-u2j]

Your an artist who's perfected his craft hope to get my skills to that point one day I am also building a crx but nothing to insane your crx is a beast

[@teigjames8076]

I'm glad i got my stickers the first day. I've been in every one except the Porsche. One of these days maybe my luck will hit.

[@Matt_Holcomb]

Put a vent cap on your valve cover. The crank case has no way to vent and that's why you shot your oil cap off. Just put a breather on one side. Stay awesome man

[@urignorance2922]

I think the feders need a vent just beside the headlights letting the air flow through the vents at the back of the fenders near the doors

[@tonyengland1974]

put your anchor played in the floor that you can hook a receiver hitch to then when not in use unbolt it

[@samcasson4871]

Reminds me of an A-10. Its a plane thats built around a gun, and this is a crx built around a crate engine

[@williamleadingham6276]

One of those Casey's customs under the lip of the cowl hood would be wicked see it when you look thru the windshield so it would be a subtle hidden thing. But if I was you I'd also wanna show it off so not real sure lol

[@nicksilver3730]

You could put your Casey's custom sign ( one on each of the B-pliards side of the windows vertically and one just under the wing dead center) just and idea

[@mikehensley7468]

Put the caseys custom name plate on the inside door sill where the stock plastic trim came off that had the gas tank and hatch open latch and covered the fuel hardli es and electric harness...

[@HectorMateo-l6l]

excessive "blowby," which means combustion gases are escaping past the piston rings and building up pressure in the crankcase, forcing the oil out through the easiest escape route - the oil filler cap

[@Jasontodd74]

Wheels are a pain in the ass to get exactly right. My Porsche was the same way. I wanted 20's but 99% said I couldn't. I did and it hasn't ever rubbed. They are 11.5 wide rear and 9.5 front. Different sizes front and rear. 35's on front and 30's on rear I believe. Pain in the ass!!!

[@Wortheys_Garage]

Be waiting on your videos like pops back in the day, waiting for the days of our lives, tv show😂😂😂

[@CaseysCustoms]

@@Wortheys_Garage 🤣🤣

[@commentdeleted173]

I like the wheel measuring kit.

[@blahblah4125]

CRX BIG BLOCK NOISES! gotta love it. I was as excited as you were when you fired it up lol

[@JulioforChrist]

small block chevy

[@YouSpamTard]

I should warn you about fiberglass parts in case you don't know. There may be very small air pockets in the fiberglass you are not aware of. When the sun hits the fiberglass and heats it up, these air pockets expand and make pimples all over. The last kit i did, everything looked fine and nice and smooth, but when I put it in the sun to make the primer dry quicker all these air pockets expanded and there were hundreds of pimples everywhere. I had to pop every single pimple and fill each and every single one of them. Good luck and God bless.

[@Camoburb]

Those plate would be AWSOME in the kickplates with a backlight!

[@ArthurClemons]

Just an Idea, the Casey Custom badge might look cool on the roll bar, (in the middle of the top cross bar) so you can see it through the back glass

[@chochosquad]

BRO YOUR THE BEST AT UPLOADING AND ACTUALLY GREAT CONTENT! Im going thru alot mentally and financially and your videos makes life easier to endure! KEEP BEING THE GREAT MAN YOU ARE ❤🙏🏽

[@Angellun]

Side it again Let's go sounds beautiful very good job okayyyy😮❤❤❤

[@ianhoyt2638]

I just want to say, you have eight videos titled with finishing the crx.

[@CaseysCustoms]

@@ianhoyt2638 technically we are finishing it… hope to be done by the 17th “finishing” video

[@ianhoyt2638]

@@CaseysCustoms Lol! Can't wait!

[@deadly_dave]

@@CaseysCustoms I don't know how I feel about that. I want to see it finished but then it will be finished and I wont see it anymore.

[@emersonb5764]

He has been finishing it. Ever since he started it. ;-)

[@Ghostman_999]

Love the build man can’t watch to watch this❤

[@gionoor3304]

Put your plate behind the middel taillight glass, with some red led behind it!

[@murcieme]

Hey Casey, have the guy who does your rendering like the final Blazer and have him do a couple of the Honda . Have him do the original red and silver two tone but replace the silver with white. I think the white will make the red pop and give a real clean crisp look to the car overall.

[@mathewcoates7413]

Those Casey customs plates need to go on the door steps (where you step over the frame to get into the car when he doors open) and in the rear on the roll cage near the fuel tank for all to see

[@StuffwithNeon]

I wish I knew how to do stuff like this. I know you just have to do trial and error, but I don't even have a garage yet. haha

[@danbarton27]

Grill wise… you should cut a custom “Casey’s Customs” design grill. Would look amazing on the car and will have your name very visible!😁

[@richardbrowne3641]

Try looking into Mickey Thomson tires, Cassy. They make wide tires.

[@ryanwhite9473]

Eh Casey keep up the good work!..love watching and learning from your videos! Viewing from Canada bud 🤙

[@burgersandburnouts]

That caseyscustom thing would go nice on the steel chair/seat

[@newvintage1554]

Casey use wedge anchors to mount winch to floor

[@HectorMateo-l6l]

Your oil cap went flying if someone was standing in front of they would of knock themself's out with that cap 👀👀👀🤕🤕🤕😎😎🤣🤣🤣 Casey customs👍👍👍👍

[@EDgarbFriendly]

Casey's customs in the door jams

[@jefferycecil765]

Or badge as door handles that would look sick!

[@jefferycecil765]

Put your badge on the side skirts. I reckon closer to the back wheel

[@mikemichaels1962]

Other than sill plates, those go on your custom frame somewhere.

[@justinjohnson7997]

Love the work keep up the good work ❤

[@battleaxeryders]

Bought a sticker about halfway through the video, and at 23 minutes when you decided to do a burnout I new it was money well spent😆

[@CaseysCustoms]

🤣🤣 thank you and good luck!

[@randallmeredith9987]

Put the plaque on the dashes of all the cars on the passenger side. Clean

[@mvdesigncustomworks5460]

man you gotta make a splitter under the front bumper, braced to the chassis. every time you lean on the front the whole bumper flexes, this will eventually crack you paint job. Check out the one Ding Dong Drift made for his Soarer, he goes in depth on how to brace it properly.

[@jprice3648]

The graphic the old man laid out on the CRX, makes the car look like a vans shoe.

[@CharlesRicoSloan]

As a fellow artist of autos. It looks fine. It looks American style without bending into the cover of Tuner Magazine. Has a mean look with the wheels just hiding enough for people to notice.... much later

[@JosephRoten]

Those plates you have that says Casey's customs would look cool as shit as door sill plates with lights that lites up when you open the doors

[@BigKrisMorris]

Please take this to the drag strip when it’s done. And the corvette!

[@Arsonist808]

I see the 86!! Brahda i see it!!

[@nazarethleong2944]

You should put them as a insert on the top side of the skirt that’s in the interior

[@williamquinones2870]

Yeah someone else mentioned about your one wheel peel anything can burn rubber like that your going to need a Posi Traction Diff because this one may end up being your weak link Sounds like more content to me Brodder 👍✌️

[@Inthegarage685]

Hilarious when the valve cover vent popped out

[@donaldreese2688]

Bubba you gotta move that fuel pressure regulator away from the exhaust that thing starts leaking and the crx is a goner I've seen those things leak from all possible areas especially from the gauge

[@CaseysCustoms]

It’s gonna move over to the left more, i didn’t have enough fuel line to put it where i wanted it. The goal is to have it kinda behind the firewall on the brace behind the firewall and just have the guage visible

[@mastercricket7626]

Hell yeah bro ... fucking rad as shiiiizz ... mad respect Casey... peace and love brotha, keep it rad, stay safe, and build on..l8r famz and keep having fun all

[@cobaltlukather9045]

that CaseysCustoms sheet has got to go in the taillight bar, and get illuminated as a running light

[@jruzich43]

Put the name plaques on the kick plates like the old Fisher coach plaques.

[@JH-vf8rm]

Your old man’s got skills! I say keep the graphic, it’s grown on me.

[@mysticsmoke4958]

Put the Casey’s customs plates on the driver door jam.

[@johnfalk8425]

Put that aluminum sign in the front bumper in that piece of mesh!

[@atrem7942]

Only thing i would change now while you still can separate the bumper from the fenders. It a nightmare when you get it damaged

[@workingmansrestorations7071]

You are getting pretty good at swapping fuel system on that car...

[@CaseysCustoms]

You ain’t wrong lol

[@porterscotty1]

Put those plaques on the side riser of the hood both sides

[@firlanedrummer87]

I think a 235/35 on a 10” wide wheel will give it that stretched tire look.

[@resdawgs]

Nice. Keep it going casey.

[@JMGilberto]

The more you offset those front wheels outward, the greater their scrub radius when you steer, and the more that tire and wheel move fore and aft in the wheel well. Greed here can equal fitment issues later.

[@garyma8809]

Put the sign where The 3rd brake light is at on the hatchb

[@Boatsaccle]

I found your channel with the ae86 so I’m super stoked to see what ends up happening with it, assuming you keep it👀👀👀

[@DavidJones-wu4yd]

Why did it blow out the oil cap you need to take a look at that an fix the exhaust leak but I love your show I love what you do

[@HectorMateo-l6l]

this is often caused by worn piston rings, a faulty PCV (positive crankcase ventilation)

[@alkalimuzikgroup2045]

Where you get the aluminum name plates they are awesome

[@miguelpagansr6128]

I would put your logo on top of the fuel tank, you'll see it through the rear glass.

[@nastyn8te328]

Is there a pcv valve on that thing? With the way the oil cap blew off I would say no or it's clogged.

[@MATCH-n7c]

you shoudl put the casey customs on the floor of the foor frame or one on the passenger side the dash

[@tylerbarrett6652]

That's a tool... not a decoration. You paint through it... any color you want, and "Casey's Customs" will then be on your stuff. So - you can put it EVERYWHERE if you want to. We don't have to choose just one spot, you know? I've been eager to see you get this running... but more importantly to me - looking good and comfortable. I feel like you are trying to tackle the impossible... but maybe you can pull that off. Thanks for sharing all these crazy projects with us... makes us feel like maybe we AREN'T as insane as we thought.

[@Angellun]

That's right you got to leave your stand and each built ya make

[@paosaelee7846]

You should put that Casey Custom sign on the dash bord...

[@edsbikelife3025]

BACK BUMPER

[@Null7Mereel]

I've watched a few videos of guys running an engine on a dyno with a carb, swapping an EFI kit on the same engine, on the stand, and firing it back up and they all seem to average a 25ish HP gain

[@HectorMateo-l6l]

valve, or a blocked crankcase breather system.

[@Psyrecx]

*Door sills are where those plates should go.*

[@mikepoint4717]

Man I’d love to see it on the dyno , What gear ratio does the reared have Casey ? . Cheers 🇨🇦

[@davidgough7382]

it's alive!!!!

[@robertbennett6271]

Dude. Will your custom name plates work as door sill covers?

[@jamescrisante1673]

Casey's Custom polished door sill covers of course ! What did I win LOL 😊

[@Pinki-77]

Liked the damn video while you keel over from the heater cleaning its self.

[@nickhighfill3059]

Doing the burnout for the boys 😂

[@JasonNorton-e8m]

17”s great as long as you don’t hit a bump😂

[@bikescarsandmore6156]

I love this build

[@chrisleclair3214]

One thing I'd be worried about is the front "new" wheels hitting the exhaust when turning.