55 Gasser Rear Suspension

today we are mocking up the ladder bar rear suspension
thanks for watching
like comment subscribe

[@DesertRatFabrication]

Coming right along, nice work

[@rustedjunkgarage3316]

Good job young fellow, going to be a neat 55 Gasser .👍

[@drainpluggarage]

Good choice on the 9" 👍 i finally put one in my 57 after i blew up 2 of the old 55p rears.

[@bigblockkings1031]

I subbed to your channel so I can see your progress. Good to see a younger guy building an old 55. I'm 66 and built my last 55 much like you did. crawling around under my car and stuff. since I don't have a good welder, I also took the serious welding to work and used the big welder. Just my word of advice,use plenty of jack stands and PPE.

[@deathgripgarage7865]

Thank you, I try my best for what I have, I try to make sure to be safe when working on cars

[@rongraves2330]

By placing the Adjusters in the middle of the Axle Housing you have rendered them useless for adjusting pinion angle and preload....Could have purchased non adjustable bars for 1/2 the price....Good Luck!

[@johnbiernot6730]

Did you mount your brackets upside down for your bars?

[@deathgripgarage7865]

I'm not sure if there is a right way to mount them, but that's how I did because the research I did is you want the bottom bar as close to zero as possible and if I mounted them the other why it would be harder to get the gasser look

[@tri5garage544]

I was thinking the same thing but I think if you don’t want the car low how he did it is probably better.

[@waynebrizendine3292]

Your brackets on your ladder bars are up side down.