57 belair with a CRAZY lock up part 1

[@Brotivate]

Great walk through of the process Alex!! I definitely enjoy seeing constructive/creative content such as this. Keep up the good work. #Hoppos #lockup 💯💪🏿

[@d-mossworld6972]

Hell YEAH!!! Another masterpiece! I hope it pisses off all of the tri-five purists! Innovation in motion! Badass, Alex!!!💯👊🏾

[@ericv4152]

BTW I REALLY LIKE THESE LONGER INSTALLATION VIDEOS..keep them coming

[@richhidalgo8567]

Nice!. Can't wait to see when it's completed with that high lock up on 13s will be sick!!

[@Brotivate]

Man!! 🍻

[@Mark-zk7mv]

Hella good video bro. Hope you keep making them. It’s good for business.

[@daisyvigil8810]

Wow bad ass Alex keep up the good work also keep the videos coming very inspirational

[@Hoppos_alex]

thank you!!! ill keep them comming!

[@jimmytorres111]

You a bad man Alex! Nice job and video is very educational 💯

[@joeb9543]

Awesome Video Bro

[@vincentshattuck1796]

Alex this video has answered so many things I've wondered about for so long .Thank You.The work you and Your team does is AMAZING.

[@ericv4152]

Damn alex THEM WELDS LOOK SO BADASS THAT YOU CAN MAKE THEM “SHOW” status lol

[@monadking2761]

Love your quality of workmanship. I have a 55 2 door wagon I'm converting over to a Nomad with a California frame... And yes, I'm grafting in a Nomad roof, A, B and C pillers too, then angling the whole back gate area to match my other Nomad that I have for 43 years now; however, I have been thinking about a 4 link for more rear swing travel. There is one big difference, I'm going over to air for a smoother ride. You do real nice work and no mater what people say about hydraulics, people should enjoy all forms of customising. It's rolling art and it's not getting crushed. Keep up what your doing and teach others as well.

[@derrickgonzalez9846]

I love your channel bro! It helps us people that have no knowledge of hydraulics and provides us with all kinds of great information! Keep it up man!

[@assassinsopsgaming1188]

Good shit homie😎

[@RJTickler]

Super clean work!! Hey do you guys sell accumulators?

[@Hoppos_alex]

whats up brotha unfortunately we dont

[@jacetorre2407]

Wooooow dude is a beast on the welding

[@ramonpreciado5058]

Damn Alex you do the cleanest work that I’ve seen precision on all your work 👌🏼

[@Hoppos_alex]

Thank you appreciate that the crew gets down for sure!!

[@YoungoneYoung-lm4xe]

That lockup is soo sick it made my stomach hurt! Excited to see the finished product.

[@clearpath100]

A master tradesman. Hidding nothing and sharing your vast knoledge. Well done.

[@stillrumone]

EXCELLENT WORK, AS ALWAYS...

[@RedRocket64]

Them welds! Excellent work Alex 👍🔥

[@Hoppos_alex]

Thanks brotha

[@danhodgkiss9798]

Awsome job 👍. You my friend are a artist. I would love to learn and build lowriders for a living. You have the best job lol.

[@dominickhoffa2498]

Fk yeah that's what I'm sayin!

[@361CustomRideScene]

Cant wait to see it finished! Amazing work as usual!

[@Hoppos_alex]

Thank you!!!!

[@sadame1414]

Nice LOCK UP!! CAN'T WAIT TO SEE THIS 57 COMPLETELY DONE..💯👊👍

[@joeyglasses7626]

Amazing Work Get Down Hoppos!!

[@zayyflicks4007]

Well quality video love the longer videos that explain everything!

[@montelbonteengar3882]

Cool. My dad gave me his 1959 impala it started as a old school lowered hot rod. Then a mile custom. Then some how it became a low rider with hydraulics. Still my daily driver. I commute to work from New Mexico to Arizona in it every day. That old cars been everywhere. I love it and I love it. Its even more fun to drive now.👍😎

[@1yris1]

Lets see it. I looked on your channel hoping to see a video of it but no luck.

[@Randy_51_]

Super-super loved this video!!

[@rudyflores9395]

Sir you are SIC awesome to watch a master at work from the RGV Tx. awesome work again sir

[@sadame1414]

Good work ! Nice video and informative. Pepperoni, pineapple PIZZA!😋 YUMM!

[@dekebell3307]

Man, you've got amazing skills. Beautiful work.

[@JuanGonzalez-dv6im]

👍🏾👊🏾💪🏾😎🍻🍺 great craftsmanship

[@shorteru6173]

those are some good ass welds bro 👍🏽

[@Hoppos_alex]

Thank you!

[@shorteru6173]

Right On

[@scrapingpavement]

So sick! Bridge came out awesome🤘🤘

[@240sxv8]

Beautiful welds alex

[@Trashencash]

Best one yet Alex

[@jakedelaymustdie6665]

You guys do such amazing work. A life goal of mine is to bring my car to you guys for a setup.

[@Delfi1900]

Dannnnngggg!!!!!! you guys are almost as good as me!! Lol 😂 👍🏼👍🏼👍🏼 it's a master piece!! no doubt about each car being a one and only piece of art,,,, can't wait to see it finished,,, 🤙🏼🙏🏼🙏🏼

[@kolohelau1185]

Badass... bro straight up OUTSTANDING🎶

[@MrInsane760]

That's a crazy set up bro. Good work

[@johnsmith-qz4bv]

that is some awesome work you do .keep up the great video/work..cheers

[@raiderrey6142]

Good job!

[@lincolntilt9559]

Keep up the good work !

[@toons3115]

Beautiful bro⚡🍒

[@Fridayy_the_13th]

Love the longer vids homie keep em coming 🔥🔥👍

[@Hoppos_alex]

I'll try brotha

[@Tonychavez8226]

Nice work 👍🏽

[@geronimoarangojr]

clean work bro!

[@candorguy]

Meticulously well done!

[@Hoppos_alex]

Of course!!!!

[@charlestoothman5637]

Nice job well done 👍

[@ralphhernandez8551]

Lauren Daigle.., "You say" On the radio in the Background.... keep up the good work Alex., God Bless 🙏

[@nandoortiz89]

Satisfied even tho I’m not the owner

[@most-hated-inc]

"That's a 37 inch bead - Single pass." F*** yeah!

[@kenadams3951]

Beard?

[@javierflores4605]

Best quality shop 👍👍do you sell reinforcement templates

[@Hoppos_alex]

For a few cars yes

[@relaxese4822]

0:00 - 0:05 “when you see someone you know at the store” 😂😂

[@MXL686]

Quality work

[@mercedesbritton2145]

Do you guys plan on making any frame reinforcement plates for tri-fives, building a 57 vert and just want to beef up the frame, not to really hop but move fast just for safe measure, thanks

[@benperalta6763]

This would be great!

[@burrvisiontv]

Awesome video. Thanks

[@eddielopez7958]

dame bro no copyright u the man bro

[@hedhigh520]

Excellent welds

[@terrencechisholm6066]

No. Lie

[@fuzzymoto896]

Alex what kind of shoes are you wearing? Excellent framework.

[@Hoppos_alex]

Redback work boots

[@cmccmc6946]

nice mig welds👍

[@jennishettleworth2384]

Nice job bor you the man

[@mdelgado8386]

Nice work man

[@HiDezert66]

Freakin Awesome

[@slowbrown12]

Man I wish y’all had a shop here in Memphis tn I would love to take my truck to yall

[@jerrygriffin9730]

What's best set up for 76monte Carlo..single pump??..1gate to front (piston)..2 gates in rear..reg.. hopping, 3 adex's,..10 -12 batteries??..full frame a-arms, rear end, training arms..??..sizecoils..4ton in front, 3ton in back..4switches.

[@Hoppos_alex]

call us up brotha it makes it a lot easier 909 923 5553

[@gerekappo]

Thank you for sharing!!

[@Chief_Chavo]

Man I wish I knew how to do half of this stuff

[@Hoppos_alex]

You'll only learn by trying

[@chatobalencian1504]

What size cylinders were used on this bro looks bad ass and beautiful finished

[@Hoppos_alex]

22 telescopics

[@anthonyvalles8781]

What other than Currie 9 inch rear ends can you use on a 66 impala so that I can put on fender skits so that I can put in my Hydralics and wire wheels they fit on there without rubbing or popping off

[@trentarbeau8753]

Hello Alex, I had a question for you sir. Why not plate the top and bottom of the frame too when plating or reinforcing the frame ? Thanks for sharing your videos sir and appreciate your hard work as well.

[@lowriderlovermodelcarslowr2322]

Nice job sir 😎👍

[@1320420]

Well done!

[@burrvisiontv]

I just left your shop yesterday

[@lamontarnold1612]

Impressive 💯

[@macbutler814]

Nice.are you guy's going to be making the rear arch reinforcement plates for the bigbodys

[@Hoppos_alex]

We already have them

[@NINERCALIBOY]

That's dope AF! Where's the video for the rest of this build?

[@fuerzaamericanbulldogs3096]

Nice job!

[@gerekappo]

Sick car!!!!!

[@MeowMackDog]

I don't know but maybe you can fabricate idea I had about instead of chains it's basically modified seat belt bracket how a seat belt can roll out until you hit the bottom out point but when you lower the car back down and set up the felt dragon on the floor getting tangled up it sucks itself back in and I always thought that would be a neat concept cuz then you can tuck it away but you can still lock up cuz the quieter you make the suspension the sweeter it looks and sounds

[@Hoppos_alex]

We don't use chains for one looks really cheap, 2 it slaps around making noise if not locked up. 3 chips chrome up. And we use limit straps to eliminate all those issues

[@MarioMyers-q7i]

Well I 'm a fresh installer I work with North Tampa customs. Do you know Dominican & kev can you recheck how the hell is Black Magic and ACES WHIPES -1

[@slarneypig]

Saw welds....Subscribed.

[@1yris1]

Does anyone know if this car is finished yet? I would love to see the final product.

[@Hoppos_alex]

Finished a while back here it is in the beginning of the video kzbin.info/www/bejne/Y2bVpXSol7isr7c

[@classicstangbrn8964]

I had little idea how much work it takes to do truly quality work, thank you. I'm not a low rider, I'm a hot rodder, and I know that line is getting blurred these days. Do you need a track bar to control side to side movement?

[@Hoppos_alex]

No not with a triangulated 4 link the upper bars keep it from swaying and keeps the rear end centered

[@lowriderlovermodelcarslowr2322]

If I take my car with you How long would take I'm in Oregon

[@anthonyfriday2282]

That being done on the 57 chevy, would that have to be done the same way on a 47 chevy coupe n on a 55 Ford customline 2dr ht. I'm wanting to put a g-body rear end on both, the 55 I want it to lock-up bout maybe 65% of that 57 n then the 47 coupe I want it to lock-up about 50% of the 57 n the front I want to hop it old school maybe just about high as a 40oz bottle of Old E.

[@stevetruesdell8600]

I need a full wrap on a 63 Impala. How much? And when can I get it done

[@johnbeer5242]

😀😁u almost bit it Alex😁

[@Hoppos_alex]

I know lol I didnt wanna edit it out thought it was funny lol

[@jennikeenanshettleworth4213]

hay. how u doing bro my u have a nice b day I mite be late but have a good one ..love your video ice job thank you ..........

[@JPangelinan]

@alexhoppos909 i got a 81 Coupe DeVille. What kind of set up should i go with if i wanted to hit 3 wheel and stay on 3's and a little bit of hop to it. Not trying to major hop But, would like to hop a little. Thanx

[@Hoppos_alex]

Call us up

[@Buick72100]

What frame is that thou? Doesn't look like a '57 frame

[@Hoppos_alex]

57 frame stock

[@benzboston]

curious why you wouldnt use a holesaw bit to cut those holes.do you not want them circular on purpose?

[@Hoppos_alex]

The big holes for the smoke stack?? Cuz it was like roughly 6.375 inch hole that's needed and they don't make hole saws that size

[@johnbeer5242]

🤔good very good nice

[@dap1127]

awesome !!!!!!!!!

[@rayvaldez1983]

What does a lockup like this cost if you don't mind me asking

[@a.m.7191]

Chingon work ethic 👊

[@barbarahernandez6264]

Sic video homie

[@jasonl5719]

I'd hate to see what the anti-squat numbers for that rear 4-link are.

[@rapidfiremuzik_official]

28:19 is the bessssssst part

[@louieflores6690]

How much for the 4 link kit need it for my 55

[@jayinmi3706]

I see you are a miracle worker, too. lol