574C Turning Point Fall Reveal

[@menciussoh3490]

This bot SUCKZZZZZ

[@genericnpc5669]

Press 'F' to agree with this statement.

[@kurt3500]

F

[@elijahxiao9591]

F

[@menciussoh3490]

F

[@jovanchua3252]

F

[@21area21]

God bless that punch. I see so many people building them with way too much extra metal. D: Finally one that's clean!

[@kimhiennguyen1593]

This robot is awesome. You guys did a great job. This is our first year in Vex and we are still have a lot to learn. We had our first competition last week. We made it in finals but didn't not win anything. It was a great experience. We are trying to figure out how to get the robot to go up the platforms. Do you guys have any suggestions . Thank you!

[@kirbyfu2615]

You should have exposed wheels at the front of your bot. It can just be your drive wheels, especially if they're 4 inch, or they can be free spinning wheels mounted off the ground like 240p did with Medium Quality kzbin.info/www/bejne/jKWleouFnJV4qas

[@faizfakhruddin2478]

how do you build that angle adjuster? Really amazing

[@21area21]

Yo. Thanks for the reveal. Everything is so clean. The video's shots are on point, and that's an amazing execution of a creative idea on the robot side. Good shit guys. Gl at competition.

[@davemacharoni3730]

Congratulations on the victory at kalamari

[@aidanpatterson5345]

dave macharoni kalahari lol

[@jayzuhlke5846]

What size rubber bands do you use on your main intake, ours is about the same size and we haven't' found the right ones yet? Plus your robot rocks, have a wonderful holiday.

[@ziyans4262]

Love the bot. Built well, and preforms even better

[@Zak_45464Z]

I agree with your statement about punchers. I have a puncher on my robot and it works so well

[@uhzeem495]

same

[@uhzeem495]

people were scared of us

[@filmmaster1758]

Our you guys going to world's because we are and it would be really cool to meet you guys

[@danielabdoue3793]

We have almost the same exact robot, except our punch is mounted perpendicular to the drive wheels, which allows for a pretty cool mechanic of just driving in a line while being able to rotate the shooter to hit both flags. We are thinking about implementing an H-Drive: i.ytimg.com/vi/ozVOsZQHKQk/hqdefault.jpg to allow us to have even more mobility for quick shooting

[@rjk368]

puncher op

[@jareyboi8208]

looking forward to seeing you guys at kalahari!!

[@josephkelsheimer8610]

FamousFox AYE

[@pablomaidana649]

Como haces para mover el angulo de tu lanzapelotas?

[@aristonzhou1819]

574C, how do you guys get on the ramp with the intake in front of you? Wouldn't the backing get caught on the tubes?

[@gradenj4632]

Do you guys have any tips on how to get on those parking platforms our robot just won’t and I can’t figure out why. THe motors just stop once they hit the bottom platform

[@olivarfrazier4257]

How many motors are on the drive

[@brettshadduck1173]

How do you know the angle to put the puncher at?

[@ayushpalse1596]

That's some op LCD placement ya got there

[@8pxl_]

lol ikr

[@grvtygaming1847]

How is the puncher so strong and fast? We had to use a gear ratio for ours, to give us the strength we needed to hit the flags

[@ryden.o]

Do you guys have the problem where you use your roller intake to flip caps on the ground, but it flips back to the opponents color?

[@574crobotics4]

Occasionally, but with a lot of driver practice it isn't a common occurence.

[@ryden.o]

Also, how does your puncher not get pulled back because of the rubber tension?

[@574crobotics4]

We have a ratchet system that holds the slide in place when we pull it back.

[@doerleohe]

#punchergang

[@8pxl_]

what are your opinions Puncher or catapult?

[@ragetempo5638]

Puncher

[@thamos7315]

this is late but for sure puncher. unless you’ve gone forward with catapult

[@ragetempo5638]

Elrond TD catapult is a kinda of a basic start for juniors but it’s very handy to toggle flags faster

[@priydevsingh5403]

Why do you have a ratchet gear on your linear puncher

[@josephkelsheimer8610]

Priydev Singh to speed up our cycle time

[@adhityaravikumar9163]

Why is there a ratchet gear next to the slip gear on the puncher?

[@josephkelsheimer8610]

Adhitya Ravikumar It allows the bot to ratchet back right before the puncher shoot and holds it. It speeds up our shot time

[@katzedas5273]

Do you not think that the disk placement is going to be worthwhile? I didn’t actually know you could remove them

[@carlosm7701]

If it takes you too much effort/time to place caps on the poles then its not really worth it because bots like this that focus on balls can just knock them off very easily. Thats why we(7701X) have been focusing on shooting balls and have built an active intake for our caps. This way we dont waste time trying to just pick up a single cap that can be easily de-scored. Balls are definitely meta rn.

[@AstroInvasionGaming]

@@carlosm7701 sugma

[@atharva2387]

@@carlosm7701 can we see ur reveal

[@kevo_chen]

@@carlosm7701 This does not represent the views of our team. cjm_ is arguably stupid.

[@AstroInvasionGaming]

@@carlosm7701 can we see ur sugma

[@jordanbusard1711]

Flywheel gang still does not approve

[@richhays9373]

HOLY FECAL MATTER! try Greta Van Fleet "Safari Song"

[@athomeinventions7266]

Woah! Another greta van fleet fan. That's rare!

[@-tempest-6333]

This bot sucks..... *hole counts*

[@perrybotics]

Indeed

[@geogo5515]

How many drive motors tho

[@574crobotics4]

read the description fam

[@trevinsmall]

@@574crobotics4 those are turbos tho right

[@574crobotics4]

@@trevinsmall nope, they are speed motors. We chose speed over turbo for the extra pushing power, which is valuable for playing defense and pushing other teams off of the parking platforms.