5900kv on the STOCK 35A 2in1 board?... Think I POPPED it!🤣

[@roadstar499]

I agree this cars stock motor and gearing is perfect...that little bugger does like 35 mph on stock 2s battery i think..Great little truck.

[@alantaylor353]

NAILED IT.!!! 👍 👍 👍 👍

[@armandopace6113]

Great video mate what a beast 👍🤪🤣🤣🤣

[@rccrazy]

It really is a little beast😆 Thanks mate🤘

[@khanmackesy7520]

Love the vids etc, I'm modifying my scy pro, what part number do I need to get for 22t pinion gear? 😊

[@rccrazy]

Actually 22t mod0.6 pinions are very common, if you google search 22t mod0.6 pinion you should find heaps (must have 3.175mm bore to fit stock motor shaft) Sorry I don't have the part number for this particular one as I forgot what car it came out of😅🤦

[@monkeytrident]

wow that impact @ the start haha !

[@rccrazy]

And to think it drove away to flip again another day🤯 well up until the moment the esc died at least🤣

[@JesseBlum]

I can't believe how great that little 35 amp esc is. I off course think it's important that people make sure to add a good fan regardless

[@roadstar499]

Great video! I definitely need to learn how to service diffs .😊

[@rccrazy]

Thanks dude😁 It's not too hard once you understand the difference oil thicknesses/viscosity. Thicker oil like 50,000 weight will make a tight diff and 10,000 will be much easier to spin. The other important part is shimming, removing as much play or slop from the outer diff gears (diff crow and pinion gears) ALWAYS shim the gear side of the diff not the plastic case side of the diff, that will push the gears closer together making a tighter mesh. But you only need like 0.1mm to 0.2mm shims, can't make it too tight so it locks up. Measure the inner and outer bearing rings to find the shim size you need👌

[@scaleworksRC]

Nice man! One trick I found with the Mini T playing around with pinions is you can flip it around and have the screw on the outside, so you don't have to cut.

[@rccrazy]

Thanks mate👍 Yes you can sometimes spin the pinion around IF the motor shaft is long enough for the thickness of the motor mount, in this case not😪 All good though, it took about 2 minutes to file it out with a small round file😁

[@scaleworksRC]

@@rccrazy Nice! I can't wait to see this Ford GT do 100mph thanks to your tips

[@timallen6035]

Good video. Definitely tested the durability of that little truck. That hit on that rock looked rough.

[@rccrazy]

Watching it back for the first time in slowmo and realising it hit basically side on was surprising, definitely rough😳😅 Thanks Tim👍

[@Top-Jimmy]

Awesome video Saul ! - These little bashers are just getting better! I couldn't believe that even ran up with that setup ! What a killa! 👍 Hey bud, Im looking to do the pinion mod for the 144010 to get her to 100kph but am unsure of the bore size. The dude on eBay asked me what number mod it was..But I haven't got a clue what he means by that. Are certain mods coded so they make sure to send you the right stuff over? - Thanks champ, Your video's are seriously crankin mate. I loved that build you did a couple of weeks back and noticed some very positive feedback in the comments man. Does this mean we may see that old Cobra hit 100mph soon? hahah! Really enjoyed this, You take care man, Cya again soon bro! 👍

[@rccrazy]

Thank you so much😁👍 Not sure what video you watched or the comments from what video that anyone mentioned 100mph with the cobra but no, if I did I was dreamin🥴 Would have to change too much and I'm not that invested in the VRX rigs anymore, sorry! I gotta get out and beat my 134mph PB soon but not sure which car it will be yet, maybe have to invest in the upgrades for my limitless😬 And mod or pitch is the actual size and depth of the teeth on the gears. So 1 think the 144010 has mod0.8 gears meaning tiny🤏 teeth. Not sure how big pinion you can go upto with the stock mount but the spur is HUGE so it will be a bit of a mission with the stock spur unless your running like 7000kv motor on 3s or even 4s. I changed my spool(centre gear shaft) so I could run mod1 gears(bigger teeth) but much faster gearing so spur is half the size compared to stock and pinion double compared to stock.

[@BangForYourBuckRc]

Saul that was a Crazy good video brother! I’ve got a couple different versions of Su Chi Yue cars brushed and brushless and they’re Just awesome! If they came with oil filled shocks these things would be on par with MJX 1/16 Rc’s. You really know how to bash’em buddy! Always love your videos!💯🌟❤️🍻

[@rccrazy]

Thanks so much mate!😁 Oh yeah if they came with oil shocks they'd be even more popular, saying that though some companies add a $2 upgrade and charge $100 more for the car🤦 I would hope if JJRC/Su Chi Yu did decide to add them they don't inflate their prices 10 fold like so others.

[@BangForYourBuckRc]

@@rccrazy 100% agreed my friend!

[@UrbanLegendRC]

These little cars are so much fun rc crazy

[@rccrazy]

100%👌

[@roadstar499]

I also actually really like these stock radios..they seem to have great control and at least 200 meter range...ali also sells these esc,s cheap..i cant wait to get mine..any day now..i will stay all stock on this little beast..i think it gets 34 mph on stock ion 1300 2s battery..great video..😊

[@rccrazy]

Yes the whole car including the radio systems do a great job😃 Hope you get it soon so you can enjoy it lots😁

[@roadstar499]

Finally got mine...fantastic on 2s! may not bother on 3s.. mine came with metal knuckles...i remember watching some videos and a few guys broke plastic knuckles after beating the hell out of them..i am guessing they upgraded mine....lastly i have no brakes ,it just goes fast reverse unlike my other race car version that uses same chassis and esc....any clue if i can get brakes on this bugger? Thanks 😊

[@rccrazy]

Oh you got metal knuckles, sweet. Not sure about the brake issue sorry mate.

[@roadstar499]

Yes, i was surprised..even metal wheel hex...it is all good just does it going slow..tested my other and its the same...brakes are awesome..i even though 3s 1000 20c..it was only 90% charged..was windy as hell..hard to handle,sick power and speed..i am sure i would hit 50 mph maybe faster if i could have got it to full trigger...i think esc is fine..both my syc 2 in 1s have tabs and are screwed to chassis...anyway love this truggy..thanks 😊

[@kuganreddy6921]

Great video.Mine cuts off while playing in the grass after like 10mins.Same no throttle just steering.Esc was very hot.Is there anything i can do about the heating.Running on 2s

[@rccrazy]

Thanks mate😁 There is not much you can do other than add a fan to the esc. If you have the esc with 3 hold down tabs they are know to get hot on 2s and fail on 3s, the ones I got with my cars were not the tabbed versions and they don't heat up on 2s.

[@petervenner2450]

RC crazy, this videos is amazing! Just wondering when you installed the new pinion gear, did you need to move the motor mount over at all as the new gear is larger that the 18t stock pinion gear? Also wondering how the motor temps were after running speed runs and bashing?? I've got a 60am hobbywing in my setup so I've been more concerned about a higher KV motor overheating. Thanks and keep up the good work!!

[@rccrazy]

Thank you very much mate, I really appreciate it! The motor mount flips around 180° to fit the 22t pinion. If you look at the mount out of the car, you'll see the motor is not actually mounted centre of the mount, offset slightly. And the this 5900kv motor got quite hot on 3s, I wouldn't recommend 5900kv with a 22t pinion for bashing, I would probably say 5000kv max on 3s with 22t but that may even be pushing it.

[@petervenner2450]

@@rccrazy Good to know and thanks for the quick response! I have it apart so I'll take a closer look at the motor mount tonight. I was planning on running even less than 5000kv with a 20-22t pinion. The truck absolutely rips already and the stock motor stayed very cool and the esc even cooler. Just looking for a bit more top end speed out of it. Figured a better quality motor (like that LC racing motor you mentioned) might deliver more efficiency and speed?? I run it will the punch on the lowest setting which makes it much easier to avoid flipping and losing control since they're so light and so fast haha

[@rccrazy]

It kinda sounds like you know what your doing mate, spot on how I like to set up my cars😁 When it comes to basically every rc car even my speed cars, low kv high gearing and high voltage tends to be much more efficient and run cooler. And yeah you end up with a much more capable setup in my opinion👌 So saying all that I personally love the stock motor at what is it, 4000kv I think🤔 with a 22t pinion and currently run a hobbywing 10bl50a esc on 3s, should last forever! And just a side note, 20t will not work without modding the mount you'll strip a gear or both, it only accommodates a 18t or 22t mod0.6 pinion. And all good but any more replies may be delayed, off to bed now, 4am in Melbourne, oops😅

[@petervenner2450]

Good to know about the 22t pinion setup! Thanks for mentioning that point about the fitment. 22t it is! Thanks so much and I'll keep you posted with how my little truggy makes out with the new setup. Keep on ripping!@@rccrazy

[@mussietube9909]

Love you videos man, i cant find the zee 3s lipo what you recommend for fitting without any modify

[@rccrazy]

Thanks heaps mate🙏 Most 850mah 3s should fit. Check the measurements of the battery before purchasing, the ZEEE 3s fits perfect so check for these measurements. 70mm long 32mm wide 22mm high

[@mussietube9909]

@@rccrazy thank you verry much sir for your helpfull information

[@rccrazy]

Hope it all helps😊 Good luck mate!

[@jakethein1795]

I have this truck n was wondering what oil filled shocks your using thanks got mine for $67 off temu the beginning of June n now you can't find the brushless version for under $85

[@rccrazy]

I just use wltoys 144 shocks or the original MJX hyper go shocks, do a great job and available most places online👌

[@NewZealandWild]

My Q117 is out of action as well now, smashed the front suspension when it hit a rock. It's all rusted to buggery too, in only a couple of months. It rains 5 days a week most of the year here, so it's always on wet ground or grass. I was going to try something really cool with it soon too. Maybe you can try it. Might get you a few extra views. Here's my idea: Cut up a beer can and wrap it around the heads up wheels. Then take off on concrete at night. I'm guessing you should get quite a spectacular trail of sparks. Could be a nw craze ... COMET CARS ! 🤣 Love to see how it goes.

[@rccrazy]

Oh no good, yeah I don't often run my cars in the wet so I rarely get rust on my cars. And not sure about there but we have Aluminium drink cans here now and alloy doesn't spark on many if any surfaces, you would need titanium, flint or some form of magnesium to get a good spark👌

[@gilbertosantos2659]

Hello, everything is fine, your video is great, which esc are you using, is it the original? 👍

[@rccrazy]

Thank you! Yes it's the original esc, 35a

[@ChrisSpencer-ut7wu]

Awesome video... I am new to the rc world and I just bought two of the beast max brushless versions for me and my daughter. Lots of fun. We've put some 2s li-po's in them and the are almost uncontrollable for a beginner. I put some oil filled shocks on, I think 66mm ... ?? And it sits way too low

[@ChrisSpencer-ut7wu]

I tried looking up the shocks that you have and I'm having trouble finding them ... Any help would be great, thanks

[@rccrazy]

Thanks Chris👍 Yeah they definitely get up and go with a decent lipo. I use wltoys 144 shocks, but they are 65mm, I use 65mm or shorter so the chassis can still bottom out therefore restricting damage to all the other components. I'm not sure what you could use if you want longer sorry, so many shocks on the market.

[@ChrisSpencer-ut7wu]

@rccrazy I appreciate your help a lot. Like I said, new to the rc's that could take someone's ankles out if you're not careful. I've spent countless hours researching different set ups. I wish I would of spent a little more money and got us bigger scale models, but I'm trying to make the best of what we got. Should I add oil to these shocks? They are 66mm. I noticed your axles run downward to the tire, mine run upward a bit to the tire... ?? I knew something wasn't right when I installed them. I also can't figure out what size tires to order for these things. Don't want to burn the motor up. I also dont know enough about the gearing to tire size ratio thing.?? Do you have any videos on tire sizes?? If so could you lead me in that direction!!! Thanks again man.

[@rccrazy]

Your welcome mate. Assuming you don't mean the stock shock as they are not oil shocks, if you purchased some and were sold as oil shocks you should be able to put oil in them. For speedruns having the shafts parallel to the ground helps with smooth runs but yes for bashers they should only be parallel or pointing up when the shocks are compressed, bit odd they are that long but already compressed under the cars weight🤔 And the stock motor and esc can handle quite a bit especially if you have the NON tabbed esc(no screw tabs) You can run bigger wheels if you want but I probably wouldn't advise it, it could cause early damage to the gears and as I said if the chassis can not bottom out all the other parts cop the stress, chassis slapping is in no way a bad thing as most people will tell you it's quite the opposite, damage prevention!

[@elmenor732]

Stock motor and esc does it for me I upgraded the suspension and battery 3s lipo zeee 850mah 100c and this thing just needs wings so it can lift off 😂 I want to upgrade the wheelie bar can’t drive on high it does backflips on it’s own now 😅

[@rccrazy]

Yeah as I said at the end of the video it really doesn't need any upgrading but yes if you decide on going 3s aswell the wheelie bar is almost necessary😅 Thanks for watching👍

[@caifu8703]

Hi! I just had this jjrc car for about 2 weeks and I’m thinking about upgrading oil filled shock and I also wanna change the diff oil too . What would you recommend? Or should I just buy the same one that you used in the video ? I mostly do on road and sometimes off-road.

[@rccrazy]

Hi 👋 Yes with the diffs if you use 50k rear and 30k front it should be good for both on and off-road, some people prefer thinner in the front so you may just have to experiment a little if you find this set-up I'd not for you. Shocks, the wltoys shocks are great with 30-40w oil front and rear👌

[@caifu8703]

Thank you

[@Tahia1]

Hello, when you change the esc, how do you bind it to your controller ? I've got the scy 16101 pro, i wonder just in case i need to change it one day. Oh and i love my RC, it's so much fun ! Thx for your video !

[@rccrazy]

They are awesome cars! I'm glad your enjoying yours🙂 When you change to a hobby grade esc you also have to add your own controller and separate receiver like the Dumborc x6fg system. You can not use the stock 2in1 as it is the esc aswell as a receiver. You need a hobby grade system, all the electronics are separate from each other.

[@Tahia1]

But what if i just change to the same stock ESC ?@@rccrazy

[@rccrazy]

Well then it's as simple as removing the old one and installing the new one. The new one will bind the same as the old one to your existing controller, just turn on the controller first then turn on the car, they should find each other👌

[@Tahia1]

OOh nice ! thx for the information ! i wish you the best !@@rccrazy

[@Tahia1]

Oh i've another question, the stock ESC is 35A 2S but i've seen some vidéo with people using 3S battery with this ESC to attaign the 70km/h or even more. What are the risk ? I know that the car can obviously break due to the crash at high speed, but for the rest (motor electronic tec..) is there some kind of other risk ? @@rccrazy

[@space348]

Great vid mate was just asking can i run a 3s battery with everything stock in there

[@rccrazy]

Thanks mate, seriously love these jjrc rigs🤩 So if your 2in1 board has 3 screw tabs that hold it to the chassis rather than double side tape then I highly recommend NOT to run 3s. I put up a community post a while ago explaining/showing the difference between the 2in1 boards as almost everyone who tried to run 3s on the tabbed version had them fail or get extremely hot extremely fast. All mine are mounted with double side tape and never had the 3 tabs, they have all run 3s no problem.

[@space348]

@@rccrazy thanks bro🙏

[@rccrazy]

You are very welcome! Good luck🤘

[@tylerguitreau74]

​@rccrazy unfortunately I didn't see this info and I believe my esc is shot.. do you know of a link for the esc you mentioned here?

[@rccrazy]

I was using a stock one but one without the 3 screw tabs. I do not have a link because every time I've ordered what looks like the non tabbed version I have received the tabbed ones. No idea who actually stocks the non tabbed ones?

[@speedslidesandspeedrides1728]

Whath are the size of the diffs the diff length teeths and specific diameters and will this also fit my q901 diffs thath diffs are 30mm at 38mm lengt and 24mm in width i like to upgrade my stock diffs because those are iron

[@speedslidesandspeedrides1728]

And or the good

[@rccrazy]

What size? In what way do you mean? But yes they are fine for this car.

[@xwilson999]

Hey, do you have the link for the cooling fan for the ESC? My Q117 ESC heats up quickly, and I'm curious about the setup for the fan, because the Q117 doesn't have designated plugs for it. Thanks!

[@rccrazy]

In the listing below👇 the ones that say "for ESC" I think have the correct plugs. I myself replace the fan connector, solder on the same plugs as I use on my little 2s lipos and run a separate fan battery. www.aliexpress.com/item/1005004876532450.html?src=google&src=google&albch=shopping&acnt=631-313-3945&slnk=&plac=&mtctp=&albbt=Google_7_shopping&albagn=888888&isSmbActive=false&isSmbAutoCall=false&needSmbHouyi=false&albcp=19821179470&albag=&trgt=&crea=en1005004876532450&netw=x&device=m&albpg=&albpd=en1005004876532450&gad_source=1&gclid=CjwKCAiA6byqBhAWEiwAnGCA4Nqh5jduS3nigz4nb1oiUeE0oWZB6iKscfWxvZtx52ica8TNQoPvfhoC4MMQAvD_BwE&gclsrc=aw.ds&aff_fcid=92f9d895034941d7a87b13f6f987d45f-1699724482116-03286-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=92f9d895034941d7a87b13f6f987d45f-1699724482116-03286-UneMJZVf&terminal_id=a47acc8ce4fb4ff6b7402d104288dd9c&afSmartRedirect=y

[@IkerSS2011]

What are those wheels please? I like them a lot.

[@rccrazy]

They are the stock HSP 1/16 monster truck wheels, unsure where to get them sorry.

[@Texxler]

Got mine today :D Cant wait to test it. Sadly i dont have any clue about 3s and stuff :D Think i will leave it as it is

[@rccrazy]

I'm so glad so many people are choosing these JJRC/SCY cars, most stable and capable cars for the average price, I love them and i hope you enjoy yours😁 And 3s is just the next higher voltage lipo compared to 2s, the S actually stands for "cells" no not sure why it's S😅 But it's quite simple, each cell is 3.7v resting voltage which is the voltage used to calculate multiple cell. (2s) 3.7 x 2 = 7.4v (3s) 3.7 x 3 = 11.1v And so on. Hope that helps get you started✌️ And just another quick tip. The C rating on a lipo is basically a indication of how fast the esc can pull power/amps from the lipo. Higher the C rating the more punch off the mark you get but it will run flat sooner.

[@Texxler]

@@rccrazy yes i changed the shocks already to oil filled shocks as u recommend😄 just cheap ones but i give them a try! Thx for the explanation

[@rccrazy]

Cheap isn't always the worst😁

[@roadstar499]

Watching this again i bet you would be able to break 100kph with bigger diameter wheels easy...just a matter keeping it planted...great demo..

[@rccrazy]

Very possible yes. I won't be trying though sorry, I would hate to crash this one at 100+ as they don't have the strongest parts😬

[@roadstar499]

I agree,my little sg918 race woth this same chassis hits 40 mph on 3s and its ridiculously fast...your truck must seem insane watching it go by at 58 mph...great run...

[@Vinishelby1]

I bought a car like this and it really is very good, I just have one question. Can this ESC really support a 3S battery (11.1v)?

[@rccrazy]

Yes they really are amazing little cars! So many people have run these on 3s without issue but lately a few people have said theirs fail on 3s. All mine, 3 so far have been flawless running 3s completely stock standard. They don't cost much to replace so I say give it a go, you can always swap to a better esc and radio system if needed

[@yiannisyiannis]

@@rccrazy ah man the thing is where I live is like soo difficult for me to get parts so uh...can u tell me at least if it gets how when it runs stock on 3s? I want to get it to those crazy speeds but if it is for it to burst into flames, meh I wont do it. What do you think? ALSO, great video man

[@rccrazy]

The motor was fine, most brushless motors can handle well beyond the spec. If you have the 2in1 board with the 3 mounting tabs attached to it I would recommend not to run 3s, many have failed on 3s.

[@yiannisyiannis]

@@rccrazy Yep that's the one I got... Thank you very much mate! Keep it uppp....

[@rccrazy]

All good, don't like to see anyone loose money or have something fail if prevention is possible😉

[@brodiemartin8997]

I just got one of these, any recommendations for a good balance charger?

[@rccrazy]

Not a imax B6! I use ISDT chargers, they are great

[@SeanGT83]

Do you have any recommendations on replacement steering servos? I have 2 cars, both servos dead, had tried a WPL 1/16 but after a few mins I lose control of the car (no steering response, keeps accelerating). I’ve now ordered replacements per the part number but they are a weak servo.

[@rccrazy]

Weak servo? They are actually quite fast servos and I haven't had any fail yet.🤔 I believe the JX 1181MG servo will fit and they are great little servos👌

[@SeanGT83]

@@rccrazy thanks for the response. I'll check those out. These cars get quite a lot of run time, one has stopped steering right, the other is on its way.

[@rogersorrell507]

Where did you get the mini 2s battery ?

[@rccrazy]

Mini, I have 180mah 3s lipos now that's mini😅 Just google low mah lipos, this car can take upto at least 1500mah 2s and I find most 850mah 3s lipos to fit perfectly. Aliexpress or Amazon would be your best best, just check measurements before buying to make sure it fits the battery bay👌

[@SquirtleTheAxolotl]

where did you get the shocks and the wheels from?

[@rccrazy]

As mentioned in the video the shocks from one of my wltoys cars and the wheels from my HSP 1/16 truck

[@mattnotson2683]

Hey will that metal spur fit on the maverick atom?

[@rccrazy]

Don't think so, there is a upgrade metal spur I think for the Atom, can't recommend if it was Maverick or Rlaarlo branded.

[@fabriciosilva1616]

I bought an RC car of this model that you test, I wanted to know if I can put a 3s battery in it without having to worry, if you can help I would appreciate it

[@rccrazy]

Hi mate. I was telling people it is ok to run 3s on the stock system because I never had a problem with my 3 models but lately a few people have said their cars failed very quickly when trying to run 3s, like less than 1 minute😬 I can no longer recommend 3s on the stock system as I do not want to be responsible if it was to fail, it would be at your own risk sorry😕

[@fabriciosilva1616]

no caso eu teria que alterar o esc para um 45a ou 60a e isso? fazendo apenas isso ja conseguiria usar 3s? @@rccrazy

[@rccrazy]

​@fabriciosilva1616 you would need to change the esc to a individual esc but you also need a hobby grade controller and receiver. You can not use the stock controller with any other receiver except the receiver in the stock 2in1 board.

[@fabriciosilva1616]

@@rccrazy entendi, voce teria algum contato de whatszap que possa passar para mim, pois estou comessando agora com esse hobby de rc e queria tirar algumas dúvida😁 se não for encomendar e claro

[@rccrazy]

​@fabriciosilva1616 no I have a RC crazy Facebook Messenger account that I sometimes help people on, if you need to send pics or videos for advice. Otherwise I always recommend the DumboRC X6FG radio system(controller and receiver) as it is the cheapest for the quality and performance. ESCs are all about the same in the way of amp ratings, 45a is 45a, BUT! You do get what you pay for with ESCs, MANY budget ESCs lag, cog and glitch because they have bad firmware or programing abd can not be fixed so I do recommend Hobbywing or something equivalent or better than Hobbywing and you will have a reliable responsive car.

[@adaildo4452]

Comprei um carro igual esse.... carro muito bom, ainda está sem upgrade, mas logo logo vou começar a modificar ele

[@Alexandrinocn]

Tenho o Carro Q130 pro,q é o chassi, motor e esc do mesmo do seu, coloquei o esc (45A) reserva do meu hyper Go 16208 e uma bateria 11.1v 2500mah, ficou um monstro de veloz, faça o teste no seu mano, fica muito bom🤘💥

[@rccrazy]

​@Alexandrinocn yes I have been running mine with a hobbywing 60a esc for a while now, on 3s it's insane🤪🤘

[@josebaretto2611]

What esc are you using would you be able to send me a link? And would I need to get a different receiver or would I be able to use the stock receiver?

[@rccrazy]

In this video I am running the stock 2in1 board as mentioned in the video. But yes if you use a proper esc you must remove the old 2in1 board and add your own receiver and controller, stock servo and motor are fine to re-use.

[@jornmulder]

? you got the pro version? 55 kph, the max version is 80kph out the box, how fast will that go then on 3s ?

[@rccrazy]

81kph on 3s

[@roadstar499]

So i guess all your running hear was on 850 3s...super fast

[@rccrazy]

Yeah that's the biggest 3s I will run in mine, don't mind a short run time to keep a light weight setup, just take multiple lipos😁

[@InhumanArcher]

By any chance do yoy have the link for that pinion gear? Ive ordered one but noticed that it mine is a full circle and the one you have looks like it has half.

[@rccrazy]

I got this one from another vehicle but any 18 or 22 tooth mod0.6 pinion will work. I don't know what you mean by full circle or half though🤔

[@InhumanArcher]

@rccrazy I got it to fit thought it wouldn't. I do have another question though do you think this can run 4s with a 120a esc and a 5900kv motor?

[@rccrazy]

Ah, if you mean for off-road use then only if you want to melt the motor😬 5900kv on 4s off-road would probably die, 120a esc will be fine though😅

[@InhumanArcher]

@@rccrazy just on-road and some speedruns

[@rccrazy]

Yeah it should be OK but maybe just stop and check the temps every now and then, one or two speedrun passes then pull it in and check it. Not sure about bashing on-road, it will still get very hot. My personal rules I try and go by are For off and on-road bashing - 1. Low kv, fast gearing. 2. Low kv, slower gearing but higher voltage. For speedruns - 3. Low kv, high voltage and fast gearing. I prefer lower kv motors in general, I only really use high kv motors when I have no gearing options like having a fixed motor mount or sometimes in very small vehicles when high kv is the best option.

[@Remi.559]

Where can I find the pinion gear you are using

[@rccrazy]

Any 22 tooth mod0.6 pinion you need, available everywhere online.

[@Remi.559]

@@rccrazy thanks

[@josebaretto2611]

What is the pitch on the pinion gear

[@rccrazy]

Mod0.6

[@josebaretto2611]

Thank you new to the hobby and seeing what you do is amazing

[@HalimaAlsayed-si5xr]

How fast is it gonna be on 3s 50c

[@rccrazy]

Ahhh, I got 94kph😅 There are many factors that will determine the true top speed, lipo quality and condition, lipo capacity(mah) what esc, what wheels, what pinion, even the battery connectors can effect the performance.

[@wilber8637]

👍This model rc car really so nice bro... 😅Because im also have this model rc car... 🥰Im have the rc car model all is 144010 pro..Q130 pro..16101 pro..16103 pro & 16103 normal version... 😂But my this model 16101 rc car im upgrade already,im upgrade 120a ESC,4500kv brushless motor,oil shock original him,gear box gear & more lower... 🤣Because scared too fast than fly away....🤣🤣🤣 😇Wish bro have the good days...

[@rccrazy]

Nice you have some sweet builds by the sound of it🤘 120a in these is crazy but im sure its super fun😆 Thanks for watching and sharing what you have😁

[@wilber8637]

@@rccrazy 🤔Brother, I want to ask..every time you change the ESC, do you adjust the ESC? Because I have seen many RC car bloggers, most of them don't adjust it..😇thank you..

[@rccrazy]

@wilber8637 many popular brand escs need to be calibrated to the controller so throttle, brake and reverse works correctly, some cheap escs don't need calibrating though. Check the user manual of the esc you are using and that should give you instructions for calibrating the throttle if required👍

[@wilber8637]

@@rccrazy Oh..I just found out about this today...Because most of the time after I change the ESC, I will give it to my friend to use the "Hobby Wing" program card to help me adjust it...😅So I asked out of curiosity..Thanks for sharing, bro...

[@helderhenrique8287]

Qual é o motor ?

[@rccrazy]

I believe I was running a Surpass 2845 5900kv motor

[@antoniobove9827]

Hey mate any chance I can buy a rc crazy shirt from you please. in a XL 👍👍👍I usually go out bashing with my son both of us wearing campbelltown Hobby Shirts and get alot of questions,business and advertising for the shop.

[@rccrazy]

Hey sorry mate, internet has been out. I don't really have channel apparels anymore, got a few hats and T's made at Vistaprint couple years ago but it was so expensive and not practical for resale. I tried to work out how to get my channel store made but I couldn't figure it out🤦 I am so sorry mate!

[@SnaSna-h6c]

How many A of ESC?

[@rccrazy]

If you mean Amps then it's 35a

[@proefficientsvision6325]

Dope video man it definitely lasted a while thats for sure but yea man todays a cool day im meeting up with a friend who inherited a 1/5 exb arrma kraton n he's thinkin of sellin it for $350 but they modified it n put in a mamba 8s esc with a castle motor not sure the exact specs but it might be the 2200-800kv what u think?

[@rccrazy]

Thanks mate👍 Sounds like a great deal for sure.

[@proefficientsvision6325]

@rccrazy so basically he wanted $500 although he first told me $350 and i tried to act unsure about takin it but he seemed like he wasnt going to budge.. he said "ill hold it for u to think on it" so i decided well fuck it i might as well take it cuz overall im spending $500 on pretty much a $1600 dollar car so im comin out good at the end but deff wont be buying a rc car for quite some time lol...i ordered my IC5 banana plug cables to charge the batteries he gave me and im going to order some 6s batteries soon!! Maybe ill make a video one day and show u lol...need a discord or sumtin for all rc riders

[@rccrazy]

@proefficientsvision6325 yeah still a good deal but I hate when people increase prices after listing for less🤦 It's a 1/5 so you'll need 8s, 2 x 4s lipos if you want any decent speed out of it essentially if it is the 800kv motor. 6s will work obviously but I've heard they are rather docile on 6s🤷

[@proefficientsvision6325]

@rccrazy yea hell yea u can say that again i deff felt a way nd he tried to say he was talking about the arrma infraction 6s but thats bs cuz i neva talked about that car lol either way deff a good deal and oh wow so thats how it works!! The 2 batteries make the 1 voltage lol i didnt think of it that way but dope so i guess ill buy 2 4s batteries instead

[@proefficientsvision6325]

@rccrazy oh yea and it is the 2028-800kv sensored motor and btw whats that port on top for?

[@jornmulder]

yea i think 35A is too less for a 3s, but nice car.

[@rccrazy]

Every esc is different. Amps has basically nothing to do with what voltage you can run as there are many low amp escs that are more than 2s compatible, 12a and 18a drone escs that are 6s capable. Many variables that determine the ideal voltage for a vehicle

[@Michel7584]

Hey, why did my comment from like 10 minutes disappear? 😳 It contained 2 links ...

[@Top-Jimmy]

Sometimes happens during Video Upload champ, Unless he has links disabled in case of dipshits... Try again maybe mate

[@rccrazy]

Yes sometimes youtube removes comments that contain links. If they are not an offensive or overly rude comment I will not remove them.

[@Michel7584]

Oh, okay ... Thank you! 💪🏻@@Top-Jimmy

[@Michel7584]

Okay, but aren't you able to restore them then? It seems that KZbin just filtered it so it doesn't get shown and you first have to approve it. @@rccrazy

[@rccrazy]

@Michel7584 I never see comments that KZbin removes no

[@jeanmason8211]

Watch the video I have one just like it and I need your help to upgrade mines just like your need the linked to the parts you use in your video please . Am on a low budget please.....help

[@rccrazy]

Well in this video the only upgrades on the car are the shocks which are wltoys 144001 shocks, 5900kv motor which you can get anywhere and the wheels, I can not find them available anywhere. The rest is just replacement parts from Aliexpress.

[@JesseBlum]

Just put a 4s battery with a 3200kv motor on the drive rc truck haha. Of course uograde shocks and strong fans on motor and esc

[@rccrazy]

Yes even if your running a aver sized esc it's a good idea to run a fan anyway👌

[@JesseBlum]

You have a link for the 5900k you used

[@JesseBlum]

I just added two 35volt cap packs to this bad boy esc and with alloy kit and 4s. Of course fans on motor and esc lol

[@rccrazy]

I highly recommend to anyone not to try this as it will most likely result in a failed esc 9 times out of 10 as my mate experienced after 3 seconds of pulling the throttle on 4s.