5G Phased Array Antenna Design and Beamforming using CST

In this video, a phased array antenna was designed using a microstrip antenna.
Basic beamforming process also has been shown.
You can download project files from the link below:
drive.google.c...

[@ManjulaManju-fp3qn]

Sir please request Which parameters should be compared in microstrip patch antenna and phased arrya antenna Please reply me sir😢

[@ManjulaManju-fp3qn]

Phased array antenna and microstrip patch antenna which is best antenna and these two antenna which parameter compare in our project guide

[@mrittikarahman0111]

Please also design a helical antenna Plzzzzzzz

[@humakhalid3522]

How to make phase shifter in schematic for phased array

[@satishkumar8421]

thank you sir, very informative video

[@What-if-I-am-wrong]

What to do if Excitation port overlap? I am trying to design MIMO based on a halfwave inter-element distance and massive excitation port during simulation cause the problem. (excitation port X = 9.056 mm and halfwave = ~5.8mm) That option "allow excitation port overlapping" does not work or maybe I don't know how to use it correctly. Could You suggest something please? Thank You!

[@coffeeholic_foodie]

Do you have a step by step video on this?

[@meghjitmajumder3468]

Sir how to have the port information(in terms of S-parameters)for simultaneous multiple port excitation in cst?

[@sulaimansani3459]

Thank you sir, please can you help show us how to 'design mimo antenna for 5G application' using cst. hope to see your response sir.

[@tradtrad1000]

Is it possible to do this with an array, and a feeding network, fed from one coaxial cable point on the patch?

[@SimulationMaster]

Yes it is possible. I am working on this project to show you.

[@ruthlessroy5791]

​@@SimulationMasterhow can I cntct you sir

[@praveenhaandiassistantprof9351]

Hi sir , Nice video ..Besides the farfield pattern can we get the results for S-parameter ,Gain, Directivity Axial ratiofor two element array ?

[@SimulationMaster]

Yes you can. If you simulate the full antenna you with monitoring options enabled you can find all the necesarry parameters.

[@fabriciotoasa5173]

You can design the SMA connector with 50 ohm impedance and coaxial feeder

[@SimulationMaster]

of course. in my next videos I will design.

[@NathaShiv]

Thank you so much..can we get direct output in CST from the file you attached??

[@SimulationMaster]

what output do you want? You can directly simulate and get the result form the attached file.

[@NathaShiv]

@@SimulationMaster sir..I need to show the Beam forming to my mam Can I have your email id please?

[@ManjulaManju-fp3qn]

Sir how to calculate in parameters value

[@mohammedshareqliyakat7170]

I was woundering if you help students by any chance? I have designed a 5g filter but im stuck at one point cant really obtain the required results. Do you think you will be to help me with it please ?

[@ekinayas6376]

eline sağlık hocam

[@SimulationMaster]

Yine bekleriz :)

[@mohammedsalem6085]

How can I contact you

[@anesbel2213]

Thank you very much, This is two port antenna. So, wich applications we can using this kind of antenna operating at 5.8 GHz , I mean WIFI or 5G ? . But 5G operate at high frequency ( mm-wave) like 60 GHz. Please, if you can explain in comments a bit enough details for this antenna. Thank you very much & many thanks. BEST REGARS.

[@SimulationMaster]

there are different frequency bands for 5G. They vary by different countries. This video just a tutorial about designing phased array antennas. You can design antennas in your particular frequency and can apply techniques described here without any problem. Regards.

[@vkvnvinuth384]

for which 5g application is the above antenna can be used?

[@SimulationMaster]

You can adjust antenna dimensions and array numbers according to your application. My video is just brute demonstration of capabilities of CST to array antenna.

[@mertcanaltikardesler2803]

Hi, what type of dielectric material did you use?

[@fredfrancium]

The FR-4 and Rogers family are the most common ones

[@mertcanaltikardesler2803]

@@fredfrancium Thank you for the answer, but my question is which one is used in the video?

[@fredfrancium]

@@mertcanaltikardesler2803 Based on color I think it should be FR-4

[@maryamagha1557]

Thank you so much, Please, can i apply beamforming algorithms with cst?

[@SimulationMaster]

By changing the magnitude and phase of the excitation you are applying beamforming. Do you want to apply a special beamforming algorithm?

[@maryamagha1557]

@@SimulationMaster Yes, like LMS, MVDR and others Is this possible?

[@SimulationMaster]

@@maryamagha1557 I don't know yet. I will look at what we can in CST, and get back to you.

[@quinten52]

@@maryamagha1557 Yes you can, but you will need to access CST via another tool, such as MATLAB, to change the amplitude and phase of the excitation in CST.

[@satishkumar8421]

@@quinten52 Sir, how can we access the cst amplitude and phase values from MATLAb?

[@yaseminestekin]

When we increase the phase shift between the antennas,grating lobe is getting bigger. How can we overcome this problem? Should we get closer the antennas? Why this happens?

[@adityasinghparihar6225]

Did you get it ?

[@azismuhidin4756]

Hey sir, i got a problem with how to reducing the backlobe of MIMO antenas. Can i have an advice? I was try to add the New materials but still not good

[@SimulationMaster]

There is special taper distributions for setting sidelobe levels, using Taylor and Chebyschev polynomials. Unfortunately I can not give you exact solution for your problem.

[@fredfrancium]

You can use EBG structure

[@fredfrancium]

Here is the paper: Development of 60-GHz millimeter wave, electromagnetic bandgap ground planes for multipleinput multiple-output antenna applications

[@suleymanaltun32]

Hocam merhabalar, size bir şey hakkında danışmak için iletişime geçmek istiyorum. Rica etsem mail adresinizi verebilir misiniz.

[@venkateshvenki4281]

bro,can u send the link for downloading cst software

[@SimulationMaster]

unfortunately I cannot :(

[@shobanap7156]

Sir,are you using CST 2018 or 2019?

[@SimulationMaster]

CST 2019

[@shobanap7156]

@@SimulationMaster thank you sir

[@shobanap7156]

@@SimulationMastersir, will your project files works on CST 2018?

[@SimulationMaster]

@@shobanap7156 I don't know, probably yes :D juts try, and if there is a problem let me know

[@furkanyaman7571]

I'm using CST 2018 and it is not able to open this project file and the others in your previous videos that includes project file

[@shahnaz1981fat]

is cst open source

[@nirmalar5295]

Hi sir ,how to contact u...

[@SimulationMaster]

How can I help you?

[@manishtomar4028]

share the reasearch or ieee paper

[@SimulationMaster]

there is no ieee paper made by me. You can find other researchers doing some cool stuff

[@yusufonalan4486]

şefim türk müsün :)

[@SimulationMaster]

evet :D as bayrakları as :D:D

[@muhammadwaleed5006]

Can you make 5G antena.for me l Requirements 1) Frequency Range a. Low Band : 617 MHz - 960 MHz b. Mid Band : 1710 MHz - 2170 MHz c. High Band : 2496 MHz - 2620 MHz d. Ultra High Band: 3300 MHz - 5000 MHz 2) VSWR:

[@mrittikarahman0111]

Please also design a helical antenna Plzzzzzzz

[@ManjulaManju-fp3qn]

Hi sir how to parameter value calculate