Going over step by step instructions on how to remove the cab from your 05-07 6.0 truck.
Пікірлер: 56
@russelhough86093 ай бұрын
Retired 40 year master tech here, your knowledge, patience, and ability to explain what really goes into quality repair work is exceptional. Bravo young man!!
@Atomic_Diesel3 ай бұрын
Going to make me tear up over here! I appreciate you and your words very much!
@brocklarson4574 күн бұрын
this video is great, you make quality videos showing us average folk how to get a big job done. great job my man
@Atomic_DieselКүн бұрын
Thank you!
@Kentucky4runner5 ай бұрын
These are some of the best 6.0 videos I have seen since diesel tech Ron……keep on doing what you are doing-too many folks time lapse or jump around too quickly. I will be getting a 6.0 350 soon and getting it fixed up to pull a camper for retirement. Feel free to put out what ever content you want-I’ll keep watching.
@Atomic_Diesel5 ай бұрын
What an awesome comment! Thank you so much for your kind words!
@highstandards13304 ай бұрын
Earned yourself a subscribe with this one. I’m currently going into my first 6.0 cab removal and your video was super informative and I’ll be trying my hand at it soon. Seeing it done definitely puts me more at ease
@Atomic_Diesel4 ай бұрын
I’m glad to hear that! Thank you very much!
@tomscheetz88103 ай бұрын
This video and your other 6.0 videos gave me the confidence and knowledge i needed to ressurect my truck from the grave AND swap cabs in my backyard. I'm nowhere close to done, but ive been making progress thanks to you. You take your time and explain everything, not going to fast or too slow. Really reminds me of DTR like others have said. Also really appreciate that you realize not everyone has Snap-On money and talk about secondary ways to do certain things like the ebrake cable or engine fan. Now i just need you to drop a video on how to put it all back together haha
@Atomic_Diesel3 ай бұрын
So glad to hear this! It makes me happy people are feeling confident enough to dive into their trucks and not pay outrageous shop bills. I will make a video soon on the truck back together!
@tomscheetz88103 ай бұрын
just ordered the Ipr coolant filter and Manifold you recommended I'm excited. any recommendations for finding the original oil cooler everywhere just has the updated part number. might have to go with one of those and hope the IPR filter can keep it alive@@Atomic_Diesel
@10mm695 ай бұрын
That rock light install was 🤌
@Atomic_Diesel5 ай бұрын
lmao definitely a professional install right there 🤣
@trulyhappy88552 ай бұрын
New sub, lot of videos I’ll be catching up on. 6.0 owner working on most of it myself
@Smitty6.05 ай бұрын
Love these videos man keep it up, very informative and thorough, always good knowledge for the future
@Atomic_Diesel5 ай бұрын
Thank you very much!
@VibinWithSlim5 ай бұрын
been here since your 6.0 oil cooler video 💪🏼 keep up the good work
@Atomic_Diesel5 ай бұрын
You're the man! Thanks for the support!
@keithkaz14195 ай бұрын
Over 1k subs, congrats 💪
@Atomic_Diesel5 ай бұрын
Thank you!
@JdubYa853 ай бұрын
Great video!
@vart77674 ай бұрын
great video thanks !
@RockinSPerformance3 ай бұрын
From 1 shop owner to another, Invest in a Tite-Reach and you can zip those bolts that are in front of the rear seats out with an Impact, Total game changer
@Atomic_Diesel3 ай бұрын
I believe I will. Thank you!
@colemccue234 ай бұрын
I have a 2001 7.3 f350 that got rolled, about to pick up a new cab for it and was curious how different those cabs are compared to the 6.0 body style cabs for removal? I appreciate the taking your time showing everything as you go, not many videos are as detailed and informational as this
@Atomic_Diesel4 ай бұрын
Thank you for watching! Cabs are almost the same. Only serious difference will be in the engine bay.
@davestewart91465 ай бұрын
I have an 06 F250 with the 6.0, I’d like to do a coolant flush, I believe you mentioned caterpillar coolant, I see different part numbers on the coolant jugs, do you have a part number that I can reference? I also have a 77 f150 4x4 that I’ve owned for 37 years, so much easier to work on lol, I have much respect for you, it’s great to see a young person taking pride in his work and his shop, thank you so much for your videos 👍😁
@Atomic_Diesel5 ай бұрын
I was having a rough go at it today and your words really lifted my spirits, thank you for that! The part number for the coolant is 238-8648
@davestewart91465 ай бұрын
@@Atomic_Diesel back in the early 80s I went through diesel school working on the big rigs, while in the military I was hurt pretty bad and working on cars and trucks have become more difficult, I’m 60 now and still do what I can, I’m super anal about who works on my cars and trucks but if we lived closer I would have absolutely no problem having you do the work, thank you for your reply 😊
@Atomic_Diesel5 ай бұрын
Thank you for your service! Wish we were closer would love to share some beers and take care of your truck for you!
@visionofthetruth98357 күн бұрын
Great video, definitely subscribed. I live up north and I know you said if the cab corners are rotted, (which mine are) you loose that seam as a lift point. I am welding new cab corners, inside and outside rockers. After all new, would you be comfortable using that as a lift point again. If not what's my other option for a lift point.
@Atomic_DieselКүн бұрын
Yes as long as it was done right. I’ve lifted a few northern cabs that were made of bondo in the corners and they just crush as soon as you lift the cab.
@mikemurphy99535 ай бұрын
Great video and content...how long from start to finish did it take to actually get the cab off of the chassis?
@Atomic_Diesel5 ай бұрын
If you’ve never done one before usually it’ll take about a day of work. If I really hustle I can have one off in about an hour.
@nd73685 ай бұрын
Film a detailed 7.3 cab removal next time you do it! Awesome video. I was hoping for some time lapse, but then again, you have to show the process.
@Atomic_Diesel5 ай бұрын
Do you want to see a OBS or Super Duty cab?
@nd73685 ай бұрын
@@Atomic_Diesel I have an 02 super duty, ext cab long bed. 64k miles.. but has some rust. Previous owner did a good job hiding it. My plan is to remove the bed first, sand and rhinoline under the bed.. clean/paint frame etc.. and tackle under the cab last.
@josephlambert35604 ай бұрын
So glad i found your channel about to attempt my headgaskets. Is there a way to reach you besides on here?
@Atomic_Diesel3 ай бұрын
You can reach me on here, Instagram and Facebook! Hope the videos help you on your job!
@CharlesSchussler5 ай бұрын
Great videos! As a 6.0 owner I find em very informative. You made the cab removal look easy, and quick….. heck I shoulda removed the cab when I replaced my clutch a few weeks ago! 😂 j/k. I see you have Schaeffer’s on the shelf. What are your thoughts on that. Saw some guys talk about lead ppm being high from lab tests on FTE. Been using it myself and sending samples to Blackstone.
@Atomic_Diesel5 ай бұрын
Remove the cab for everything lol! And love Schaeffers, mostly use it because when we install big injectors they require it, but I’ve tore down two of my personal 6.0 engines that strictly ran it and everything looked brand new internally. Thank you for your comment!
@CharlesSchussler5 ай бұрын
@@Atomic_Diesel❤
@moffosbaitandtackle5 ай бұрын
When you convert over to the 6.4 filter and pan and the delete the other trans filter are you using custom trans lines or 6.4 line?
@Atomic_Diesel5 ай бұрын
I make custom AN lines for it because you won’t retain the frame filter. But you’ll have to have a Mishimoto cooler for the conversion fittings to work.
@moffosbaitandtackle5 ай бұрын
@Atomic_Diesel okay thank you very much
@moffosbaitandtackle5 ай бұрын
Would it work with a banks cooler?
@Atomic_Diesel5 ай бұрын
You’re welcome! I’m referring to your trans cooler though. You will bypass the radiator and both trans lines will just go straight from the trans to the cooler.
@moffosbaitandtackle5 ай бұрын
@Atomic_Diesel okay that makes sense thank you.
@johnnyblaze94215 ай бұрын
How much is a headstud dog on a 60?
@Atomic_Diesel5 ай бұрын
It can range very wide. 6-10k if you do injectors or need heads.
@tkmbuilds67793 ай бұрын
How much would a cab swap coast at a shop ?
@Atomic_Diesel3 ай бұрын
As in swapping two cabs off two separate trucks?
@tkmbuilds67793 ай бұрын
@@Atomic_Diesel as I have a truck with a bad cab but I have a good cab I am trying to put on it
@brianbean25712 ай бұрын
Is that rebar has a ladder bar on the rear end.ha😂