I got the parts ordered, so I will continue the video in a couple of days when I get them in. Thanks for watching and if it helps you please subscribe.
@JCharlesoutdoors4 жыл бұрын
Thanks for great how to ,many RVers will be able to save by doing it themselves thanks for sharing
@grumpysdiy4 жыл бұрын
Thanks
@leonardocastillo64444 жыл бұрын
Why on the first crank sounded uneven and then by the second attempt sound good
@grumpysdiy4 жыл бұрын
Leonardo Castillo no idea what the problem was, it had never done it before and hasn’t done it since. Prob a loose connection somewhere.
@douglascartage10 ай бұрын
hey mine is doing the same un even crank just wondering if you have any insight
@Сергей-ъ5г8ь3 жыл бұрын
Hi!What is the air pressure needed to check the system for leaks?
@grumpysdiy3 жыл бұрын
The high pressure oil system can handle way more than your shop air compressor can put out. Just use 150 psi.
@Сергей-ъ5г8ь3 жыл бұрын
@@grumpysdiy What should I pay attention to first?The ipr valve is new.Six months to him.Unfortunately, there is no diagnostic equipment.
@grumpysdiy3 жыл бұрын
If you have the ipr air test tool. Put it in where the ipr goes and listen to the oil fill location and the crank case vent location for a loud hiss. The side with the loud hiss has the leak. Give it some time for the air to push the oil out to make the hiss.
@Сергей-ъ5г8ь3 жыл бұрын
@@grumpysdiy Спасибо Друг!
@grumpysdiy3 жыл бұрын
👍🏻
@sheeplessingeorgianm99774 жыл бұрын
Excellent Video. thank you
@grumpysdiy4 жыл бұрын
Glad it was helpful!
@Сергей-ъ5г8ь3 жыл бұрын
Write down the name of the sensor monitoring device, maybe I'll buy it on Ebay.
@grumpysdiy3 жыл бұрын
For iPhone download FORScan light and buy a wifi elm327, for android Bluetooth elm327 from Amazon and either FORScan lite or torque pro. Both aps are $7.
@Сергей-ъ5г8ь3 жыл бұрын
@@grumpysdiy Спасибо Друг!!!
@grumpysdiy3 жыл бұрын
Dunno what that means.
@Сергей-ъ5г8ь3 жыл бұрын
@@grumpysdiy What's it?
@grumpysdiy3 жыл бұрын
Still lost.
@waynebarnes47563 жыл бұрын
You have to supply power to the ipr while you air test it
@grumpysdiy3 жыл бұрын
Gold star.
@harrisonbored15 жыл бұрын
Check your oil rail dummy plug
@grumpysdiy5 жыл бұрын
they are the updated version
@petroczinationalrailservic103 жыл бұрын
I found there’s a little valve opening which lubricates the gear to the fly wheel on the high pressure oil pump. Sometime you’ll have air escape around there. I ended up replacing every o-ring in my high pressure oil system. Injectors, dummy plugs, stand pipes and all. What was the reason for your long cold cranks?
@grumpysdiy3 жыл бұрын
The O rings on the nipple cups.
@davidlindsey98824 жыл бұрын
what was the problem
@grumpysdiy4 жыл бұрын
Did a video on it, nipple cup injector o rings
@paulallen36394 жыл бұрын
Sounds great compared to mine.
@grumpysdiy4 жыл бұрын
Thanks I have put a ton of time into it.
@mikesbikes15753 жыл бұрын
Over 14:00 minutes, unsolved!
@grumpysdiy3 жыл бұрын
Guess you didn’t pay attention. The leak was at the injector nipple cup…
@braveonethanks35353 жыл бұрын
You hitting the camera all the time is getting old
@grumpysdiy3 жыл бұрын
Fast forward past that part then.
@hangmantrees9 ай бұрын
Yeah. Great video other than constantly smacking the camera and getting it greasy... Lol
@Сергей-ъ5г8ь3 жыл бұрын
how can I contact you via whatsapp?
@grumpysdiy3 жыл бұрын
Yea I am not gonna do that.
@Сергей-ъ5г8ь3 жыл бұрын
@@grumpysdiy I need help!I'm from Russia.We have no specialists.I would like to get advice if possible!I would like a link where I can correspond with you.