$6,000 down the drain!!! A-518 tear down.. Save the billet parts!

[@zevgoldman6769]

I am in my eighth decade of life and I know nothing about transmissions, but I enjoy watching a true craftsman at work. I have learned much from these videos.

[@PrecisionTransmission]

Thank you very much sir

[@tomo4635]

You sir are a fine purveyor of talent.

[@fpscanada3862]

GOLDman

[@darinmckillop5044]

I also no nothing about them but am learning from your videos thank you. If I have different colored gloves I'll no my right from left unless forget witch side colors on

[@SeekYHWHsface]

Selah Habuk 3:19 The LORD God is my strength, and he will make my feet like hinds' feet, and he will make me to walk upon mine high places. To the chief singer on my stringed instruments./Inspiration+ Almost no animal is as coordinated and sure-footed as a hind (deer). A deer running on difficult terrain is an incredible sight to behold. With God as a guide, we can run with agility through any rocky terrain. /Prayer+ Use me in any way that You see fit for Your divine plan, O Lord. Carry me on any path and I shall trust the way, for I know You love me and Your intentions are always for the best for me. I shall not fear when the terrain is rough, my faith will not quake based on any conditions. For You are the one true God, and the love of my life. Amen.

[@Kevin19700]

After watching about 40 of these vids I finally realized why they are so addictive. Watching the disassembly is like a postmortem on a homicide victim or a good “who done it” mystery movie. As a 45 year retired mechanic I appreciate your attention to detail!

[@jonathans1472]

It makes sense that he uses an autopsy table.

[@bryonmichaeldonner4270]

I have never been a mechanic, but I feel what you are saying.

[@7evYT]

@Mike Studmuffin work on motor vehicles brother. lots of work.

[@richardlapoint1845]

@Mike Studmuffin practice. Start with a basic set of tools and knowledge and it'll become easier over time, plus you'll accumulate tools like crazy.

[@SeekYHWHsface]

Selah Habuk 3:19 The LORD God is my strength, and he will make my feet like hinds' feet, and he will make me to walk upon mine high places. To the chief singer on my stringed instruments./Inspiration+ Almost no animal is as coordinated and sure-footed as a hind (deer). A deer running on difficult terrain is an incredible sight to behold. With God as a guide, we can run with agility through any rocky terrain. /Prayer+ Use me in any way that You see fit for Your divine plan, O Lord. Carry me on any path and I shall trust the way, for I know You love me and Your intentions are always for the best for me. I shall not fear when the terrain is rough, my faith will not quake based on any conditions. For You are the one true God, and the love of my life. Amen.

[@christopher88719]

Richard and Trent are living the American dream. Father and son skilled specialists, a reputation built on years of hard work, serving their neighbors with pride, and they really care about the product they put out.

[@ObservationofLimits]

The reputation isn't built on hard work, it's built on *doing the work correctly*. You can work hard as hell to build a house that leaks and falls over during the next breeze.

[@henrymorgan3982]

It is so refreshing to watch a professional work.

[@zuestoots5176]

Its also refreshing to see something destroyed by pure ignorance. Done some research before this guy put that trans in and this wouldnt have happened.

[@MyfriendthinkheOJ]

I want wrench

[@bosshog7021]

Absolutely learning alot to

[@ObservationofLimits]

I think it's the knowledgeable and application of knowledge. Anyone can be a "professional" but many of them are not knowledgeable.

[@spvillano]

@@ObservationofLimits those professing to be professional and not seeking or having encyclopedic knowledge of their field are not professionals. They're simply hacks.

[@brandonsimunac]

Proof positive that buying billet parts doesn't make the trans any better if you don't build her right. Thanks for the explanations, Richard!

[@StevenBradley-sq6kg]

But it does make mistakes more expensive...lol.

[@Jeepboy40]

@@StevenBradley-sq6kg quality costs money

[@flecur08]

but it wasnt built wrong, it sounds like owner error not hooking up the cable. Many times when a part is built and it fails, the blame goes to the guy that built it but sometimes that true. other times it is user error or abuse.

[@StevenBradley-sq6kg]

@@Jeepboy40 ...no shit, did I say anything different ? Go re - read my comment, what I said is that it makes mistakes more expensive.

[@kalli71]

it was actually built right but installed wrong - everyone blames the builder. this one's on the guy who put it in the truck

[@williamschuman4951]

Golden parts, I can see you don’t like people getting ripped off, you Sir are a true honest professional

[@dirtfarmer7472]

The man that tells the truth doesn’t have to remember what he said, I don’t have a good enough memory to be a politician

[@nathanial41]

True pros are pissed of by immatators because it makes the industry look bad

[@drewsharpe7484]

No he’s not. I’ve seen him miss identify 48re pumps and that looks like a solid Sanjter input shaft…..

[@caseyalbiero7004]

@@drewsharpe7484 What does that have to do with him being an honest man that doesn't like ripping people off? Professionals can make mistakes so stop being negative.

[@strattuner]

@@nathanial41 YOU ARE CORRECT,THERE IS ENOUGH MONEY IN OUR TRADE WE DON'T HAVE TO STEAL,I BUILT UNITS FOR 47 YEARS,LIARS DON'T MAKE IT LONG,the throttle pressure cable or rod is the most important hookup on the trans,pressure is everything,all of those high dollar parts were for naught,builder should have told him,6000.00 no way,he got mooned,for 6000.00 i would have installed it to make it last

[@TonyA552]

As a retired reliability engineer (specializing in military aviation hardware) I enjoy watching your videos for your analysis of why things fail, whether through cheap parts, improper installation, hard use or whatever. I learn a lot from every one of your videos. Thanks and keep up the great work!

[@Mikeyman6488]

As a fresh out of college electrical engineer (also specializing in military aviation hardware), I can say that I enjoy these videos for the same purpose. So many videos out there just go through in "tutorial" fashion. "How to rebuild X" and they don't go into the minute details of why parts failed, and what lead to the ultimate demise of the product. It definitely gives an engineer some perspective on what types of things can cause long-term failure and ideas on how to avoid them.

[@ObservationofLimits]

@Chill Will that's not the part design, that's the overall design. The paper mill I work at went with shit machines from Serbia because they were 200k vs 500k. In two years, they lost those savings in down time. The highest wear / common failure items require full disassembly to replace. At 8 years now, they could have bought 3 of the more expensive properly designed machines with lost production. All i ever have to say for purchasing and management is ask the fucking intelligent millwrights/maintenance to assess the machine BEFORE you buy it.

[@spvillano]

@@Mikeyman6488 interestingly, there are major lessons in this video. Halfway upgrading, using lower rated components in a higher workload/stress environment and shoddy installation come to mind (I've worked in some capacity with the US DoD since 1982, so the list is more like a laundry list that the contract would govern). And while in uniform, I saw the results of fraudulently sold grad 2 bolts sold to the government as grade 5, resulting in personnel injuries, recall and eventual pee-pee smack on the supplier, who also was a victim that failed to test the subcontracted component). So, thank common sense for the invention of quality assurance engineers!

[@spvillano]

@Chill Will since front wheel drive became commonplace, removal or partial removal of the engine is necessary to remove a transmission. It's all due to how it's built, as motor vehicles that aren't custom from the ground up are mass produced and produced in a way that favors construction, not repair. As much as I've cussed at my vehicle that broke down while repairing it, I've not had much heartburn over that - even after using Dad's dump truck to lift the engine enough to get the upper cam out to replace the timing gear (and during inspection, water pump, which was nearly failed). It is what it is, or would you rather pay a quarter grand for a subcompact that's easy to maintain as it was during the '60's and '70's? I just strip and repaint the blistered paint. :/

[@spvillano]

@Chill Will you've never gone through a Six Sigma (whatever) program. Listening to workers is critical, but the bottom line rules to keep costs down, so ease of manufacture is paramount, not ease for a mechanic or owner.

[@kenmunozatmmrrailroad6853]

The amount of knowledge this guy has... my thesaurus hasn’t a fancy enough adjective.

[@Cautionary_Tale_Harris]

I hear you but I'm still going with *preeminent*

[@williamschuman4951]

Frigin genius

[@CyberdriveAutomotive]

Why not "master?"

[@Cautionary_Tale_Harris]

@@birddog0 I just want everyone to be Happy.

[@kevgermany]

Simple Expert. It's all that's needed. We've become so used to using superlatives to describe ordinary events that it's eroded the ability of English to express things that are excellent or out of the ordinary. My pet hate at the moment is awesome.

[@KevinBostwick]

The wealth of knowledge Richard shares is truly astounding. It's great to watch professionals that pay so much attention to detail work.

[@localcrew]

Three words you never want to hear Richard say: “Plum wore out”.

[@billclinton6040]

It's "plumb wore out," not the fruit.

[@localcrew]

YOU’RE the fruit! Just kidding. Say “Hi” to Hillary for me.

[@327JohnnySS]

@@localcrew be careful , you don't want to get clintoned lol

[@cat637d]

What a great class on what not to do on this model of transmission. Richard is not only a master technician he is an entire power train engineering department in a one man package, WOW!

[@PaulPetrulis]

Richard is the ‘Transmission Jesus’ - amazing the knowledge that he retains - I did transmissions for GM years back, and I’m amazed at his diverse knowledge - certainly a humble and brilliant man -

[@jimdiane1]

No matter how many times I watch him, he always amazes me. He is so casual about being so smart.

[@zackerywilson4787]

I didn't realize my 98 46re was 300lbs you guys make this look easy I can manually shift if but won't on its own and no over drive with all new electronics

[@VirtualHaz3]

There are different kinds of geniuses out there, Richard is a transmission genius, knows everything about them, and so informative as he breaks these down, very interesting to watch!

[@Jokero0o0]

One of the most knowledgeable transmission techs I have ever seen. He doesn't just know the why, he knows the what, the when, and most importantly the how to prevent it from happening again. If I ever need my Allison 1000 repaired this man is getting my money.

[@rickj1983]

You are a historian for every single part. Simply amazing. I believe you have what would be called a PHD in transmission repair. I would love to see you put one of these back together.

[@JaredHIll13]

I absolutely love how Richard enters into the shop at the beginning and says hello... feels like watching the old powerblock episodes, except i learn WAY more here lol. I think a lot of us would love an opportunity to work in a shop like this. Great stuff

[@Devilfan9500]

I got it. This channel should be called Forensic Files of Transmissions. It had a problem and Richard will find it.

[@tenajnodmot]

I have just realised that the mark of a true master is the ability to make something so technically complex seem so simple. How on earth can the average joe blogs comprehend the knowledge you demonstrate with such fluidity. Thank you from New Zealand

[@boblamb8421]

Fantastic. I never get tired of watching Richard.

[@chrissharpe566]

I’m a retired mechanic that later specialized in transmissions, really enjoy your videos, I see many of the earlier designs still in use today, but with many interesting enhancements

[@KD0LRG]

There's a new transmission sheriff in town and his name is Richard. If you screw the pooch he will call it like he sees it.

[@brad4908]

Such a delight to listen to someone who understands his craft so fluently.

[@donalddarbonne779]

No sockets were hurt during the making of this video. Bahaha!

[@patrickmcdonald3427]

You win the internet comment of the day! ROLMFAO I know all too well of using a hammer to "set" an undersized socket on a bolt head to remove it.

[@brianfogle2743]

@@patrickmcdonald3427 yes,. I have done that. Until I bought a set of turbo sockets.

[@anthonyjudd5347]

You know this man KNOWS his stuff when he's telling you what lurks behind the next ring of bolts before he takes them out. New PT addict right here! :-D

[@johndowe7003]

When ya do it for 20yr+ day in day out yer bound to know what yer doin blindfolded

[@lisajohnson8566]

Always enjoy your video's as I put 40 years building the old transmissions from the 60's and 70's. The 727 torqueflite was my favorite trans to build and like you I have seen every failure. But it was truly fun for me to see you take this late model truck trans apart and I recognized every part. Thanks for the memories and thanks for the videos.

[@roberta4989]

I am a retied mechanic. When I took my NIASE many years ago (now ASE) tests, the only one I did not pass was automatic transmissions. Because of your superb videos and thorough explanations, I believe I could now pass that darn test and have that patch too. (they probably don't give patches any more) Richard, I can tell what kind of person you are...by Trent's kool vibe to your "save the customer" money comments. Would have been great to work in a shop with you. I am envious, curious, amazed and addicted to your videos. Please put assemble some for us so we can learn that part also. Thank you for the work that goes into producing the videos.

[@kynetx]

I have zero interest in doing this for myself or professionally, but you guys are so good at your jobs that it's a pleasure to watch.

[@timothystevenson4300]

I Love how he doesn't bash other peoples work that bad, he admits when they did good and he fixes what they didn't do right. Top notch work, class work.

[@edifyguy]

Here it seems the only serious mistake was made by the installer who failed to connect the TV cable correctly. The build looks to have been pretty good.

[@AuditRecon]

Every video you guys do I’m so amazed at the knowledge Richard has amassed. How the heck do you remember all that stuff?

[@silverdrillpickle7596]

Find a job you love, never work another day of your life!

[@cat637d]

@@silverdrillpickle7596 More truth has NEVER been spoken!

[@patrickmcdonald3427]

@@silverdrillpickle7596 Years ago I read an article in the Detroit Free Press Freep section that surveyed college students about if they wanted a job w/ more money, or one paying less, but that you like. 70% chose more money...

[@rickhavern2927]

@@patrickmcdonald3427 college aged humans don't understand how decades of working jobs you hate will change your opinion

[@joecummings1260]

I'm willing to bet he grew up turning wrenches, and is probably at least in his fourth decade of doing it. Lots and lots and lots of experience

[@koolsolutionszx12r55]

You Sir ARE A BY GOD MAN! I say that because men don't rip off customers, men aren't afraid to show their work, men call out the thieves of the world like you do. I don't know where you are located but you damn sure are a transmission guru. AWESOME WORK Sir!

[@natedawg9806]

I think this is one of the best videos y’all have done yet because Richard did a lot more explaining on what was going on with the transmission and why certain things failed y’all keep up the good work and have a great day LOL

[@wildman1137]

Richard might as well be a Service Engineer. He not only knows the units top to bottom in terms of repair, but he knows the failure modes, the electrical aspects, and everything in between.

[@gerardorodriguez-uf9rx]

I love watching your videos. I know nothing about doing transmissions. Lol I’m an HVAC tradesmen. But I see your passion in your work. And pride. Makes me wanna take my vehicles to your shop to get serviced!! 💯💯💯

[@johnknott6539]

Great. No ego. Just incredibly knowledgeable and fascinating to watch

[@CarlBright]

You guys are awesome in both skills and attitude - They dont make em like that anymore.

[@frankgrillo8094]

It makes my HEART warm to find a competent- honest - prideful mechanic. I have an allison behind an 8.1 gas /02GMC WITH 110KMILES. IT'S STILL RUNNING LIKE NEW ,but I'm saving up to come to Tx from Az & have you R&R my drivetrain front to rear. Will be far better than 70k for a new truck. God bless you guys.

[@somewhatofaprofessional7940]

"it should have uhh...golden parts in it" 😂😂. That pause in-between had me dying. Keep up the good work guys and lady!! Love watching these

[@jimmyerbe768]

Triple thumbs up on all the Milwaukee tools they seem to function great👍👍👍

[@rufiorufioo]

Love watching these tear downs. I respect when Richard is straight up about saying some parts are nice. This is so awesome learning watching these videos.

[@Calamity_Jack]

Good lawd, I had no idea transmissions were so complicated! Not sure how I got this recommendation, but it's impressive how well this gentleman knows transmissions inside and out, like the back of his hand. A true craftsman and forensic mechanic!

[@imaguygolfn]

The advanced P.H.D in practical experience is unduplicatable. It's a shame we can't upload his knowledge, even if we could the digital expertise would still take years to perfect. So very impressive. I'd like to see more reassemble process. I envy the kids. There's no training like this anywhere.

[@johndowe7003]

Not many guys in the trades make videos like this . Very limited indeed and plus you can only learn so much from videos hands on experience will always be better than watching a video. I love these videos for entertainment and to know how it all goes together these guys do a great job with filming and audio

[@jaydunbar7538]

Yes their is advanced training for such things, your just not going to find it at the same place that offers degrees in the kardashians.

[@hattman2010]

I really have no idea why I watch these, but it's many hours invested. I find it reassuring that there are super competent people out there if you can find them. This was one of the best videos, yet.

[@zmbewolfable]

Speed wrench , talent , thumbs up

[@sjparker219]

Richard, I really enjoy watching the tear down and explaining of the problem. Every time you do it just flows and you put it in terms easy to understand. Thanks for all you do

[@steveflor9942]

So nice to watch a master craftsman. Thanks, Richard Thanks, Trent Y'all have a good day!

[@a.realperson]

Watching his hands when he inspects parts, his movements are so precise. This is what it looks like when a master perfects his craft

[@codylapoint]

Love how he explains things that people will actually want to know. So many people just skim over everything really fast and you don't learn much of anything. Gets so aggravating when its almost dark and you're trying to figure out which way a spring or washer goes on somthing so you can get to work in the morning. So you sit through a 20 minute video just for them to skip over the one thing you're hoping to figure out, only to talk about the blatently obvious stuff a special needs monkey could reason out. You can just tell when someone knows thier stuff, and Richard sure does. All the questions you have he's had before too, and answers most of them without you even needing to ask. I don't fool around with transmissions, but I watch his videos because its such a learning experience. I may just have to try rebuilding one someday just solely by what I've seen Richard do on here.

[@johndowe7003]

Yup right on

[@LEOhopeful]

EXACTLY! Hmm literally thinking of getting an old basic 3sp to tear apart, just from watching his videos

[@johndowe7003]

@@LEOhopeful should be straightforward rebuild just don't get oil contamination that's the biggest challenge if you don't have a decent table setup

[@dpdeere]

I’ve torn down and rebuilt several in my time . It’s not hard to do IF you have the right drawings, a manual, AND lots of time. Trying to build one in a hurry is a recipe for disaster.

[@ObservationofLimits]

Reminds me of like a how to video for some sort of resin burner to find PCB shorts. Literally just a guy using what looked like a vape pen waving over a board. No instructions, the camera was far as hell away, and no explanation of how they determined where said short was.

[@davidlibby5430]

I would just love to hang out for a few days watching this master at work. You can tell he really cares about his customers!

[@chrispapaioannou4756]

Love his knowledge, he explains it all so well too. Keep up the great work

[@garyc3955]

If their is one thing I can tell from watching this video is, this gentlemen "knows" what he's doing! Now this is a true expert!

[@kelleysimonds5945]

Always amazed by your depth of knowledge.

[@BrassMtn]

This man lives and breathes transmissions as well as vehicles! Everyone can be smart, but he is a genius of transmissions! His son is learning the trade from a true master. Good luck to the both of you and god bless!

[@warhammer2779]

The wealth of knowledge this guy has is staggering. Seriously needs to document his wisdom and make a series of books named: The Right Way To Rebuild A _____________ Transmission. Serious retirement cash!!!

[@jimzivny1554]

"Just a little tension" better order a new one, that one's in low earth orbit! 😂

[@LEOhopeful]

I've been working on cars for 30+ years, and I still think carburetors and automatic transmissions are voodoo magic, I won't touch either lol I actually worked at ZF transmission for a while, which confirmed my beliefs of sorcery! But...watching your amazing videos ALMOST makes me think I can mess with one. Damn you for for being so good at what you do, that it looks easy lol

[@treeguyable]

Dang , did carbs in everything, from 77 on up, motorcycles, small engines, quadrajets, etc. Nothing to them, if you have the kit, and a manual, did most, without the manual.

[@johndowe7003]

Once you know how a carb works and open one up they're all just about the same from lawn mower engines to double pumpers etc

[@frigglebiscuit7484]

put a straw in your drink(make sure its not touching the bottom of the cup) and blow across the top of it. youll see how a carb works.

[@tacomas9602]

What's really hard for me to wrap my head around is how some of these 10 speed automatic are put together hahah

[@gbaby3339]

I am seriously impressed with your wide range of knowledge im a Ford guy with 15 years experience transmission with Ford. Im amazed because I know the amount of work that goes into knowing a single transmission front to rear. And you have a rounded amount of knowledge. Just when you think you know something a guy like you shows you otherwise. Id be lost with a Chrysler product never touched one

[@bigredracer7848]

181👍's up precision transmission thanks again for having us all along with you for the great video

[@aaronbuildsa]

Your videos are so addictive .. I think it's because you make decades of experience and knowledge incredibly accessible in such a down-to-earth, humble way, and it always feels like spending a day in your shop looking over your shoulder (that would be a fun day!) :)

[@Organicmachine455]

Wow even auto parts will shoot at you in Texas🤣🤣🤣. Awesome teaching once again.

[@AKJeeper]

I love how you explain the sequence of parts failure from the lack of having the TV cable hooked up. I used to work on these transmissions when I worked at a Chrysler dealership, but I only know these transmissions from the warranty parts replacement perspective. I've always wanted to know the "why" behind the failures and figure out the sequence of events. And have always wanted to learn how to upgrade these transmissions beyond their stock configuration - getting rid of the wavy snap ring and replacing it with a TH350 case snap ring is one of many examples of the upgrades you have discussed on these transmissions in the past. I'm learning a ton, as well as keeping myself entertained with your videos. Thank you so much for all you do. Greetings from Alaska!

[@shanemayfield4610]

TV cable is NOT needed with a manual valve body

[@AndrewCurtis57]

I don’t understand a bloody word but I can’t stop watching. 😊

[@jamesnm21]

You got the part about no fluid (oil) pressure right? The transmission was not being lubricated. You know what happens when metal parts rub together with lots of friction and no lubrication right? Of course you do. It's common sense. There's your answer buddy. Edit: no pressure means the oil is not being cycled through the little ports and pathways inside the transmission. It's just sitting in the bottom of the transmission going nowhere while the moving parts grind against each other and quickly overheat and get damaged.

[@rpment6385]

@@jamesnm21 That's not what he was saying. He was saying without the lever and cable hooked up properly with pressure that holds the clutch packs grabbing wont have the "force" needed. That is critical on these. So as you push harder on the accelerator, the line pressure in the transmission goes up to. The pressure is about 55psi base pressure and should ride to over 100PSI. If you have a fully built unit, pressures can rise to over 220 psi.

[@jendress7842]

This cat Richard is an absolute professional and genius. His experience with his doings and knowing the ins/outs is priceless. He can tell you what’s gonna happen before it happens and what happens when you cut corners or use below par or factory weak parts. Washers , seals, orings, seals etc ! I wish he would swing by my shop and help me with my small , entry level 5r55s !! What a great tech he is !! A+ Thanks

[@bolts5994]

I love your vids. Been watching for awhile now and a big fan of Anne. I can't tell you how much I've learn from these vids. I'm NOT a mechanic and have no plans on becoming one. lol. However, I am just amazed at the amount of knowledge you have Richard. It blows my mind. I love in FL and I would give anything to have a shop like yours in my area. But those are some complicated pieces of machinery. Thanks for all your hard work, including you Trent.

[@joshmalcolm4810]

Very professional!!! I'm an auto tech and I've learned so much about transmissions and teardown!! Thank you!!

[@geneard639]

Thank you for wearing the orange and green gloves, I can really see what you're doing in the tight spaces now.

[@johndowe7003]

Yup makes a big difference

[@edifyguy]

Except Irish people will wonder if he's confused about his faith. :)

[@Hefty54]

You are like a surgeon with transmissions, and I know nothing about auto transmissions, I get lost in just watching you break one apart. I have put new sink rows in my three speed trans. but that's about it. Love the videos you do. Thanks for your knowledge.

[@cliffbeckwith4019]

Gale Banks had ATS build an Allison for his 1200 hp shop truck, were taking bets on how long it lasts. Alot of people recommended you, including myself to have you guys build him an Allison.

[@mfree80286]

If Gale Banks gets an itch for a given engine, I'm not sure you could build a transmission that would last behind it. That man has the "art" down pat...

[@alexmcauliff3646]

ATS is trash how does gale banks not know that 😂

[@tacomas9602]

@@mfree80286 a 1200hp truck needs a super tuff manual trans if you ask me. Something like a 5 speed with a splitter behind it

[@mfree80286]

@@tacomas9602 Yeah, a nice Eaton FR would handle the power all day long, and only weighs as much as an entire big block Chevy engine...

[@2l8mate59]

I never knew you could learn so much about a transmission after watching this guy. He knows his stuff and then some.

[@ryulee458]

Well good morning Richard and Trent another awesome video today LOL

[@jimmungai1938]

I’ve been a Chrysler guy for a lot of years and I realize the part about the lubrication in the back part of the transmission and that’s very critical one of the things I do is whenever we pull my transmission whenever I’ve had to and I’ve done this before clear back in the mid 80s I would take a rubber tipped air blower and not hit real hard pressure air on the transmission coolant line but I would blow a lot of the fluid out as much as I could and then I would take a canna carburetor cleaner preferably Berryman B12 and I would stick that little plastic straw into the coolant line the one word comes out of the transmission I’m talking mainly on torque flight because that’s rides to work on a lot rapper ride ride and then I would just blow carburetor cleaner until it comes out the other end and then I would blow that out and then I would repeat that a couple of times and then what I would do is I would fill that thing up with carburetor cleaner and just let it sit for a half hour or so and just blow it out really good now what I would do is I would take like a pop bottle or something that I can see through a water bottle or something and when I would do my final cleaning I would see if anything comes out of the cooler transmission cooler that really flushes them up good anyway I have a 1991.5 dodge with six in a row under the hood and I go by six in a row jim from Kennerdell Pennsylvania oh by the way I didn’t know about how the fluid pressure doubles going into reverse didn’t know that all right that’s cool hey you’re a pro and Sunday I’d like to bring my 47 Rh down to ya all right have a good day oh this is Jim mungai from Kennerdell Pennsylvania and you have a merry Christmas sir❤ love ❤😊

[@Geezer1955]

It's like watching surgery and an autopsy! I just sit back, drink beer and watch a master.

[@bowboycode2114]

Nice video. I have a 99 ram 46re I rebuilt it 25000 miles and still going. Not a mechanic by trade. Great job guys

[@forknspoon3275]

I wanna see this master BUILD a trans as fast as he pulls them apart. It’s crazy how smart this guy is. Been watching all your videos. Thanks for posting

[@jaydunbar7538]

Building it is not nearly as fast, not if you want it to last around the block.

[@davidpieratt]

After watching a few of your vids I have a better understanding of transmissions. I have always wanted to repair one but not now. Best left for professionals

[@StevenBradley-sq6kg]

I want to see the billet shaft pressed out.

[@jasonpoche4615]

This man is a master of his craft. Awesome to watch and listen.

[@StevenBradley-sq6kg]

Richard...I would also like to know what is your all time favorite transmission, I know different transmissions for different uses but your favorite as far as basic design, durability etc...

[@johndowe7003]

C6 👍

[@StevenBradley-sq6kg]

@@johndowe7003 ...what was it put in ?

[@adrianspeeder]

@@StevenBradley-sq6kg Fords from 19dickity2 to 1996.

[@joecummings1260]

My personal favorite is the General motors powerglide. Simple, rugged, easy to rebuild, and actually performed very well

[@TheCbrdriver]

You make it Look easy ..... allways Looks easy if you know what youre doing As a Shop owner myself..... respect

[@willfarrar3263]

Really looking to watching this one being rebuilt.

[@williamlindsey4148]

I have worked on a little bit of everything in my days but this kind of special knowledge slipped by me. It is a pleasure to listen to and watch an experienced professional that has the ability to explain the situation. It is a skill all it's on to teach others. Very enjoyable to me to see this video. Thanks.

[@oldUmanUshea]

Such a professional entrance.... good job guys! Why is there twice the pressure when you're in reverse?

[@scruffy6151]

We had one back in 1990 that had a gas torque converter instead of a diesel converter. Smoked it three times a two cases later finely got the right converter no more problems.

[@S1ergio01]

Golden parts!! I love it Richard!!

[@neilhansen5663]

Love learning about autos, from a senior citizen down under

[@richardcrawford8047]

Happy Saint Patrick's Day Guys.

[@charlottewilcox4406]

Great to see a person that knows how to use a speed handel, I used one for years, Charlotte's husband.

[@edwardchascsa4191]

Someone got ripped off if that is a 6000.$ trans. That came apart better than many of the transmissions i fixed at the dealer. I never see any air pressure checks on the circuits. Something I always did. Found a lot of interesting things doing that.

[@paulmallery6719]

Wire the TV wide open for his application

[@paulmallery6719]

Rounded heads

[@frankbonura5710]

It is a true joy to watch a master at work.

[@stevemcknelly5036]

Get some rest Richard and take care of you. Great video as always!

[@chriskeiffer5861]

When he took that apart and broke down what the sequence of events that happened I got the chills! Gathered evidence then executed the verdict! You are a badass sir

[@rossilake218]

I watch Richards video’s all the time. I would never attempt to rebuild my own. With his knowledge, I would just pay to have Richard rebuild it. Never in a million years could I rebuild like him.

[@OldePhart]

thats pretty filthy for as little as the claimed to have run it.

[@philbohrman3918]

Thanks Richard for sharing your expertise

[@jeremymurphy7320]

10:10 Vehicle Modification Lesson #1: Chrome don't get ya home.

[@arod919721]

Chrome Gets you 'Dome', but won't get you home.... ;)

[@januarioqueiroz3122]

Thank you once again Richard ,for being the professional that you are!

[@98Pete]

Fiinally the dodge stuff😂

[@jeffreygoss8109]

My dodge body didn’t outlast the transmission. Every body panel rusted away.

[@michellelehky2374]

Finally a dodge that lasted long enough to get rebuilt. Aside from the Cummins, the single solid part in the whole deal.

[@jtveg]

30:40 The main event. 💣 Great work. 🔨🔧🔩 Thanks so much for sharing. 😎👌🏼

[@Cidran100]

Omg That moment was priceless.

[@bmessacar]

Always good and great to see you Richard..Thank you and Trent. Simply amazing!