6.7 Cummins Street Race Engine Struggles to Fire Up | Power Driven Diesel

[@jacobmoses3712]

I hope you have a big enough alternator

[@pddofficial]

Should be fine

[@garycraig4277]

I’m buying a 2012 6.7 is there anything I should be aware of

[@pddofficial]

Transmission, make sure it shifts right or it could be on the way out.

[@jacobmoses3712]

Will you still be able to street this truck, like cruise down to the mall without drama or huge clouds of smoke?

[@pddofficial]

depend on the tune and throttle input but it was street driven

[@jeremyhutchison8406]

Building a 79 impala two door with a Cummins 24 valve with a 4L 80 E transmission looking to know what stall converter I should use fourth Street and for fun building boost

[@bigdreamsonsmallacres]

“My buddy was Nice enough to let me borrow his rear end” ‘Ayee’ 😂😂

[@bigdreamsonsmallacres]

Meyer is the exact guy you could get drunk and talk into jumping off the roof lol

[@JohnDoe-jl3em]

Absolutely love yall, definitely seem like guys I would want to hangout with. Glad yall can have some fun at work.

[@ryanwood2599]

So much more wiring than a 12 valve and so much more tech cant wait to see it in action 😁

[@JaegerWrenching]

I wish there was some more video of the engine actually running, still awesome to see all the hard work paying off.

[@jcethel3495]

@@pddofficial ....🍿

[@nathanwoten6236]

Hit up dynatrac an get u a set of Dyna 80s front an rear they are fucken beast they have 40 spline shafts if I remember right an u can get any locker combo u want an any width pumpkin offset anything u want they are 100% customizable check um out dynatrac is the only axles I run on my rock crawler an 1300 horse 2014 Cummins 4wd sled/drag/ sorta daily lol truck

[@jacobmoses3712]

Have you upgraded the alternator? It sounds like you have some big electrical demand there

[@jeffbeaird747]

Holy smokes I can't wait to see that truck in action..!!

[@noclass2gun342]

We need a race between the fleet of pdd and Greg a...

[@sethblackburn4247]

I assume this is a de-compressed motor, how much psi of compression does it make?

[@FixItStupid]

Good ?

[@abrahamsalcido9174]

Great job guys. Keep up the great work. Letter rip tader chip !!!

[@bcbloc02]

ARB doesn't make a locker for that front end?

[@stephensoemann3576]

Street Truck for life

[@ScottKenny1978]

That turbo: ouch!!!

[@bagged1998]

Watch them anytime of the day

[@bulldozer7656]

A Detroit or thorsen diff in the front would be better. Changing L.S. clutches is a serious pain...

[@FixItStupid]

Thorsen Like That

[@jcethel3495]

Haters are gonna hate! Keep rolling... keep doing what you're doing and don't listen to their bullshizz!

[@diesellover6411]

What oil do you run ????

[@jacobschillig7290]

Probably power driven they have their own oil

[@chloehennessey6813]

Did you put all that extra eclectic draw onto a fused distribution bar? Use a lot of them for marine applications. I imagine they’d work for this as well. Be easy to wire in the relays for the fans and solenoids.

[@austindoud273]

If you're sick of that old turbo I'll take it if your hands

[@anthonievictor269]

Advance timing a bit for cleaner starting

[@pnwripping6636]

*footage before josh grinded off the banks letters* 🤣

[@chriscanterbury8647]

So just Greg a told you then haha. Silent mike is a wizard

[@anastyb]

Hey Meyer, pull my finger. What kind of antidepressants is this guy on?

[@FixItStupid]

HP LIFE

[@michaelcuff5780]

Any new info on a 3rd Gen would be great! Thanks! Was a great Video.

[@powerstroke0459]

JIC??

[@73cjproject]

Glad to see it all coming together for you. How long did the project take start to finish? What are the hp ranges or goals to start with? I can't wait to see the versatility of being able to tune the fueling to meet the needs of what you are throwing at it. Time for some burnout videos and some launch hooks. Congratulations on the build, really excited to see what the new 6.GR8T does.

[@jeffbeaird747]

He tickled his wire with fire 🔥.??? Lol

[@kylercreviston3204]

You’ll have that on them big jobs😂

[@TheFiremanJoe]

Love the Greg_A shout-out!

[@woos31]

Tear it up boys! With the six point great, not the six point great...........this thing is gonna be a hoot once all the bugs run the same direction and the electricals speak the same language! To my untrained at anything pea brain this seems like an immense task yet you guys just about got er in the bag, way to grind it out

[@fredschupner6948]

Man I love this channel!! Ive been waiting for someone else to be the bad guy but it hasn't happened yet so, who dropped what and where? To trash some injectors and the turbo wheel? LOL......

[@pbAdpcustoms]

That baby Yoda banner, was the icing on the cake for the banners you have. I'm still build my collection of banner lol

[@smallblockfuelie]

Meyer wrenches for energy drinks

[@justinlienhoop4478]

I think we need a grudge race against another fellow you tube diesel truck channel ??

[@quarter_bubble_garage4946]

One of the best videos you guys have made. I imagine working at PDD is a damn good time.

[@theoneandonly2590]

I have an 04.5 3500 drw nv5600 w 57k miles. I want to do you power upgrade and compound turbo set up. If I buy the parts y’all want to do the install for KZbin content?!?!

[@jtee7344]

Dug-adug-dug

[@FixItStupid]

No NO Spent From Life's Work HP .........U Have No Love Or respect For A MAN'S skills, Work & effort WOW??? & what have you built lately ?

[@usalives2562]

I cannot see this being a successful setup with that much n2o. I would have went with more compressed air instead of the dope. This is not a speculation I’m just saying from experience. One of the slightest changes in weather destroyed my tunes. Much easier to deal with bigger turbos than dope.

[@chloehennessey6813]

Did you put all that extra eclectic draw onto a fused distribution bar? Use a lot of them for marine applications. I imagine they’d work for this as well. Be easy to wire in the relays for the fans and solenoids.