6 in 1 - How to make a high-performance drill jig

[@たかーしぃま]

アイデア良くパッと閃くのはすごいなといつも感心させられます。観ていて面白いですわ。

[@twisterwiper]

Gotta say this is the most innovative and ingenious woodworking channel on KZbin. And I have followed many for several years. It would be interesting to know more background about this mysterious guy.

[@acanadianwoodworker]

If there was ever a behind the scenes or biography of JSK, safe to say Id be glued to the screen

[@功一-r5l]

久しぶりに見せてもらいましたけど、やってる事がレベチ過ぎて、DIYの域超えてますね。凄い👍👍👍

[@jisakukobo]

ありがとうございます。 頑張って更新するつもりですが、自家用操縦士のライセンスとるために勉強中でなかなか時間が取れなくなってしまいました。ここ一年程あまり良いモノづくりができていないのはその為です。 2月に実地試験の予定で頑張っています。これからも応援よろしくお願いします。

[@功一-r5l]

@@jisakukobo パイロットになるんですか？ 凄い👍 どこまで高みに昇るのか、さすがレベチです。合格💮祈ってます。

[@jisakukobo]

応援ありがとうございます。 そうです。航空機の訓練を受けています。 訓練が終わったら活発にチャンネル活動します。 飛行機の動画も身バレしない程度に公開できたらいいなと思っています。

[@功一-r5l]

@@jisakukobo 飛行機もDIYしたりして､､､笑😆笑😆笑😆

[@_InTheBin]

Sensei, much respect to you. As always, I enjoyed every single minute.

[@RegisMichelLeclerc]

Wow! Everything is in place to make a repeatable perfect job that you'd think could only be achieved with metal, you're proving how wood can be nearly as precise and versatile, that's really impressive. Bravo!

[@SK-S2N]

its amazing to see you still use the stuff you made years back

[@claudemathy-xz3zv]

superbe boulot, mais où trouver tout ces accessoires métalliques et alu ?? Bravo à vous et quelle belle présentation en vidéo, encore bravo à vous 👏👏

[@davepoidvin2364]

You are very talented, congratulation. Dave & The Girls

[@РоманКлецкин]

ДОБРОГО ВРЕМЕНИ СУТОК!!! СМОТРЮ ВАШИ ВИДЕО, Я ВАМИ ВОСХИЩЁН, ВЫ НАСТОЯЩИЙ ПРОФЕССИОНАЛ!!! НИ ЧЕГО ЛИШНЕГО, ВСЁ ПРОФЕССИОНАЛЬНО👍💪🤝 БЛАГОДАРЮ ВАС ЗА ПОЛЕЗНЕЙШИЙ КОНТЕНТ🤝

[@markhedquist9597]

I've always loved your portable, magnetic drill stand. And these accessories for it are brilliant! I've also thought that an oblong slot big enough for a hand to fit in could be milled into the vertical support at the back of the drill stand. Would serve as a perfect handle for carrying, or holding during drilling operations.

[@mtiger8]

Watching your videos is very enjoyable Thank you

[@bwuepper439]

I really enjoy the creativeness you demonstrate with your projects. Keep up the good work and thank you.

[@Chester16791]

Cannot find anywhere in the UK that sells a magnetic drill base , as I would like to attempt to make this drill press . I would like to add that I thoroughly enjoy all of your content. Your skill and attention to detail is outstanding.

[@Cinis1981]

Amazon, and its not expensive

[@Chester16791]

@@Cinis1981 Thanks I’ll look there👍

[@Sparky_D]

All that aluminium bar must have cost a fortune. Its beautiful but looks crazy expensive.

[@hlogoma]

Exceptional. Do you ever sell any of the tools that you design as a kit. By that I mean a self assembly kit. I would be interested! I have some ideas for gifts and they just happen to have LSK-koubou as a name. Thanks anyway for sharing.

[@RosettaSalvuella]

I found you channel n i love it❤❤❤❤❤❤

[@wagnersoloviow8443]

Talento jamais cansara as pessoas de assistirem;parabéns!

[@hemangbhavsar8]

Your videos are always very impressive..love to watch all of them... one thing i want to ask you Which type of drill bit is used for horizontal drilling

[@johngeorge5285]

You do Amazing work. Thank you for sharing your ideas & skills with us viewers.

[@daywalker5532]

Hello King off ideas This is the best channel i have in my memory list !!!!! Its always a good time look your videos thx. a lot

[@alvarohugoarangoortiz651]

Excelente .. muy profesional..veo mucho este tipo de contenido y la erdad es quien mejor trabaja...es admirable

[@homemadetools]

Nice jig. We shared this video on our homemade tool forum last week 😎

[@robertkovacic4623]

I like your channel👍.. but something bothers me. Everything is always so perfect🧐...and I know it can't be.🤔 Of course, something doesn't go according to plan, or you make a mistake... you cut it wrong, etc😅... Just for fun - a video compilation of all the "accidents" would be interesting.😉

[@CitizenAyellowblue]

Yeah, I find it intimidating when I have a go at something being demonstrated only to discover how imperfect the results are. Always nice to know that the "teacher" screws up sometimes too.

[@SiniSael]

Atleast he is human - when he started to show how to use it, the hole in dowel is off by ½-1 mm - it subtle but its off, well atleast the cross is off. Still proves the point. Is it over the top and precision far beyond you need for 95% of woodworking...Yes! Is it a great video? YES!

[@ImOnAJourney]

I think he’s a perfectionist and he plans his every move so there aren’t any surprises!

[@rosycorona592]

@robertkovacic4623 He is perfect. There are no mistakes. ☺☺☺

[@djdnauk1977]

I always wondered about this too, do you ever make mistakes jsk koubou? If so please share them so we don't feel like you get everything right first time lol

[@عليالجبوري-ض6ب4ك]

احسنت صنعاً انت فنان سلمت يمناك لكذا اعمال راقية

[@WeldingMask]

Que grandes ideas. Gracias por compartir

[@grumpy3517]

Your drillbits and drill accessories seem to be of a high quality. I would like to know where I could purchase similar. Thank you.

[@sarahacostagarcia823]

Thanks a lot for new project !! Greetings from México !!

[@rodenreyes6320]

I like that idea of adjusting to right measurement with use of flat tapers, and for clamping tight, too.

[@SK-S2N]

congrats ... your channel is growing at a good speed...

[@Matt-ux8hh]

I love your videos! thanks for making them

[@serlal-s3b]

De l'excellente conception et réalisation!!!

[@robertallaire432]

Bonjour, le métal n'est pas, comme le bois, votre spécialité. Vous lubrifiez pour le perçage de l’alliage léger ce qui n'est pas une obligation mais vous ne lubrifiez pas, pour le perçage de l'acier ou de la fonte, ce qui est hautement recommandé. Mais votre travail est toujours admirable ! Merci de le partager

[@rosycorona592]

I want to do all the projects he does, but I can't handle such perfection. I'm a beginner and a mess. 😆😊😂

[@sapelesteve]

Fantastic drill jig! 👍👍

[@tetsubo57]

Just marvelous. Though you trust glue far more than I trust glue.

[@scottfife1857]

Brilliant. Simply Brilliant.

[@РишадАуганов]

Ты Мастер, высокого класса👍👍👍👍👍

[@bamsebrumbamsebrumen5403]

Nicely done, as usual 🙂

[@reygannery3457]

give me all his tools and i’ll replicate all that he did🤣🤣🤣 including his so clean workshop…jeez, a static-free workshop…all he need is a lab coat😊

[@DoLixoaoLuxo-mt1tl]

Excelente, q qualidade e acabamento, TOP!

[@fredbush3404]

I wonder how you get all the hardware? I am going to get a few plans, I want to see how a 70 year old man can do.😅

[@roncooper6302]

I tried being perfect, like you, but I never finished anything!

[@abagoftoes4108]

same

[@user-syousei]

トリマーの集塵を完璧にに解決する治具を作って下さい　宜しくお願い致します

[@IgorPestov-777]

Великолепно!

[@willianarguello4678]

Tengo que volver a ver, está bueno, aunque no necesite veré cuando me lo hago😊

[@Вася-р4я2н]

Super video))) what camera are you shooting with??? Thank you

[@Вася-р4я2н]

ビデオを撮影している目的を共有します???)))

[@Вася-р4я2н]

非常に必要です)))

[@noodlesiis]

Very clever yes, but i often think why? Must have way too much time on his hands i guess..

[@ahmetizmir1081]

Nice video, nice ideas.

[@andreantonow3620]

Good idea, congratulations

[@ppBizU]

This is how happiness looks like

[@andreantonow3620]

Ótima ideia, um abra do brazil.

[@sebastienmazars2392]

Bonjour et bravo pour vos vidéo Je vous regarde de France et je ne trouve pas de forets pour bois comme le premier de la vidéo (environ à 30 secondes)

[@Filipp_M]

Please, make a video how you connected drill chunk to a bearing

[@RodrigoDoBrasil]

If you know about all the Chuck Norris's Facts and you are aware of their existence, it is because JSK KOUDOU Sensei allowed is name to be replaced by the one of Chuck Norris. Domo Arigato Sensei for that new masterpiece.

[@katrina7659]

May I know what the brand of your drill bit is? It looks pretty sharp! Thanks!

[@sergbesfammilniy]

😊 педантичность во всем и даже мелочах этого мастера ПОРОЖДАЕТ УВАЖЕНИЕ и правильную 😂зависть

[@alexyt2]

Hi, I really like those clamps with cranks that you use. Could you share the brand, please? Thank you!

[@errolflyne4630]

im ill for his jean apron, his magic is there

[@sandragonell21]

Hola excelente trabajo, bendiciones.

[@СергейПолтинник]

Супер, отлично придумано и хорошо исполнено, настоящий мастер.

[@qresu1]

as always perfect, nice

[@OERYV]

Isn't this the same reupload as few years back? Not complaining though as all tutorials were optimised and neat to understand.

[@Sasha3Ddruk]

Чудовий задум та відмінне виконання!

[@johnford7847]

A very useful jig for many purposes. Thank you for sharing.

[@davethurston753]

Very nice

[@jesusquiroz9593]

Manos y talento prodigioso

[@5thgalaxytv734]

Instead of using the lathe will a bench vice and holding the drill carefully might work .Hold straight and drill with the wood clamped.

[@alainbriot]

Very ingenious. I had the same problem and I bought a WEN drill press for USD 95. Does the same.

[@gtechnosinc2518]

I bet this guy's drill jig is way more precise than that WEN drill, they do the same,but not as precise as this guy, this guy is almost like a human cnc, lol.

[@alainbriot]

@@gtechnosinc2518 To me this apparatus is a solution to a problem that does not exist. Just a complicated way to drill a hole !

[@willianarguello4678]

Me gustó 100 X %. Vds. tienen todo para hacer esos proto tipos, aquí ni soñar y encargados son carísimos o los pedidos son robados, por quien sabe! Salodos desde nicaragua, estamos largo de mejico aquí hace calor.

[@longvu7435]

Thank you so much

[@b4lt4z4r85]

Open source Everything Bro! :D

[@davros517]

Very impressive..........

[@mm5mm6]

8:24 Why not let the iron plates into the wood to get a smooth surface?

[@_InTheBin]

Was also my instant idea. cheers

[@ERROR-413]

only a german would ask such a question, greetings from germany! 🤣

[@mm5mm6]

@@ERROR-413 Troll.

[@umelec-diy]

👍👍👍👍👍👍

[@tvm73827]

私は偉大なインド国からの熱烈なファンです。インドと日本は何千年もの間友好関係にあります。

[@nrm2511]

That's really great to hear from you 😊

[@sjaakhosters419]

@Robert Kovacic. Indeed, a few bloopers would ben fun. However, it looks all too easy. One time I tried something similar, but the painstaking preperations of designing something usefull, a step by step srcipt, filming ánd editing, tryouts, testing, buying and finding the right materials and last but not least cleaning the workshop every step of the way....was just too much for me. He is one of many, but lonely at the top.

[@平八郎-l9n]

タイトボンドって日本の木工用ボンドと性能違いますか？

[@jisakukobo]

接着性はあまり変わらないかもしれません・・・

[@Unikus777]

What a force have that magnetic holder, please ?

[@ahmetizmir1081]

The central axis of the round wood to be drilled can be found easily and quickly with a simple mechanism mounted on the machine.

[@takkanrespect]

すごく作りたい気持ちになるのdすが、中華ドリルチャックというものがどこ探しても売ってないんです。。。

[@jisakukobo]

アマゾンで売っていますよ。 amzn.to/47MuzRk

[@nibugari9715]

鉄板の収まりが気になります

[@BartekEVH]

Amazing!!!!! ❤

[@nahumsantos3626]

Muito Bom

[@4cuarenta]

Genio!!!

[@raffaelestordone4722]

I like it! 🤩🤩🤩🤩🤩🤩👏👏👏👏👏👏

[@Stonky77]

I just saw this reposted on Facebook with no mention of the creator.

[@leroymellix5647]

BRAVO!

[@cuceritorul7814]

Respect.

[@merlinmagnus873]

But wait, there's more! So many add-ons.

[@renzopagotto9194]

Buongiorno,non sarebbe utile, mettere un righello sul lato della colonnina? Così sé si dovesse fare un foro di profondità o più fori,vengono fatti tutti uguali? Buona giornata

[@JunktionJack]

You can’t find lumber like this at Lowes or Home Despot

[@randellgann1345]

Not sure it would be possible, but for those of us who might want to give one of your projects a try, would it be possible to provide the source of some of your parts?

[@grahameburnip5880]

Channel is very good but I don’t think I could make anything shown, sometimes it materials, what are they, dimensions etc. then some of them need a different jig making first, it’s. Chicken and Egg.

[@orielsy]

His plans are in the metric system (as they should be). I'm American BTW. You have to source the parts from Misumi or find a suitable replacement. You could in theory take the ideas and put your own spin on them to avoid using his parts but that could be a challenge.

[@grahameburnip5880]

@@orielsythank you, I should have realised the plans would be available, lesson learnt and apologies to JSK.

[@fabricemenoud3296]

Si seulement j'avais su, je serais aller faire des études en technique ou en menuiserie 😢 Maintenant c'est mon corps qui ne peut plus hélas.

[@Mehhh_was_here]

when the angle is 89.998° and this guy had to make sure it is 90° 😂

[@jesusquiroz9593]

Y belleza porsupuesto

[@nrm2511]

Namaste, I'm from AKHAND BHARAT. Ancient India we always put GURUJI sthan after PARENTS and before GOD. Let me be honest with you. When we learn anything from others irrespective of their age we'll always treat them as a TEACHER ( GURU JI ) so, before praise or pray our GURU JI we always need his chehra as per hindu mythology (means his photo) My sincere request, in your next session any possibilities show our GURU JI face NAMASTE 🙏

[@be_best_ever]

Как ловко у вас всё получилось

[@lowrads3653]

The addition of a lead screw can eliminate the clamp. (リードスクリューを追加することで、クランプをなくすことができます。)

[@RosalindBevis-p4o]

Effertz Ways