Converting a tabletop grinder into a disc grinder～卓上グラインダーをディスクグラインダーに改造～

[@jisakukobo]

If you like the video, please introduce it to your friends and social media !

[@london_roubenl]

💯

[@arvidpaulius7816]

Your works and products are meticulously precise. 👍👏 It is nice to know that there are such specialists. 😊 Good luck to you. 😉

[@GeorgeMinton-jb8ky]

You are a skilled artisan. I always appreciate how you make things that are so intricate and useful.

[@tonyratcliffe4090]

Not only a brilliant artisan, he has single-handedly saved the threaded insert and double-sided tape industries from bankruptcy

[@ЕвгенийПалыч-т5ч]

Талантливый человек талантлив во всём! Отличная работа!!!

[@familiadaney]

Amazing, creative and perfect as usual Well done!!!❤

[@alknis]

Очередной отличный Ваш проект. И как всегда безупречное исполнение. 👏👏

[@AirtonJose-c1k]

Português

[@alknis]

@@AirtonJose-c1k Mais um grande projeto seu. E como sempre, execução impecável. 👏👏

[@carterscustomrods]

I'm really surprised that you didn't use a belt/pulley system in order to lower the speed of disc. I've tried several sanding disc builds on bench grinders, and the grinders did not last long... until I made it offset and used a belt and pulleys to lower the speed.

[@waterboy8999]

Is it not possible with an electronic gizmo?

[@carterscustomrods]

@waterboy8999 yes, but the cheap ones are really sketchy. The VFD would work, but pricey. A single 2:1 pulley system will be perfect for disc sanding.

[@waterboy8999]

@@carterscustomrods Thanks, that's hard to know, I don't know much about them. Ramon Valdez has a good dock for the belt sander that I made, he's got some great stuff on his channel.

[@carterscustomrods]

@@waterboy8999 thank you! I'm going to go check his channel now.

[@turnipsucks6416]

Far beyond my current capabilities. Great idea and build!

[@fouadsharif2327]

Mr JSK......the way I see it is that on the day you were born....the Good Old God....did not have much to do....so he spent more time with you...giving you all these talents and most importantly he gave you patience.......which is a rare commodity

[@mariadefatimalopez5304]

1ELE DEU TAMBEM UM BOCADO DE DINHEIRO PARA ELE COMPRAR TODOS ESSES EQUIPAMENTOS SOFISTICADOS

[@woodworkingandepoxy643]

Just subbed. This channel is amazing. I never could figure out why so many woodworkers buy these expensive tools when we can make anything we put our minds to. Youre awesome

[@volkangunyeli]

Kusursuz ve yaratıcı projelerin efendisi🙂👏🏻👏🏻🙏🏻🙋🏻‍♂️

[@ninnick-nick]

When Mrs Esthetic and Mr Functionality shake hands ! Once again a pleasure to watch! Thank you 👌👌👌👍🏾

[@VVygolovsky]

Исполнено, как всегда, отлично! Но я бы на месте автора подумал бы трижды, перед тем как устанавливать наждачный диск такого большого диаметра на это маломощное точило (всего 125W). Мне кажется, двигатель будет перегружен и легко может сгореть. Двигатель в одном из предыдущих роликов автора гораздо лучше подходил на эту роль. А ещё автору повезло с такой идеальной фанерой, даже балансировать фанерный диск не пришлось.

[@kuma9069]

That is a functional tool, built in a dream workshop! Thank you, Presenter-san.

[@maxwang2537]

Beautiful and pleasant to watch. I like the cleanliness of your workshop and the close-to-perfection and elegance of your work. If there is one room for improvement that I can think of, there can be a switch placed at a more ergonomic position.

[@frankkummer6649]

Geniale Arbeit und sehr sauber ausgeführt,Greetings from Germany

[@jdmxxx38]

Real craftsmanship. Wonderful project

[@spydermag5644]

Thank you or make making another video. Your wood working tools are amazing.

[@robertkerby2581]

You are a superbly talented woodworking Craftsman! I am supremely impressed by this design and build project! Well done, Sir!

[@maxb2231]

I like your videos and your work is oustanding, and I like the way you don't act as if you are a performer showing their ego, like many others do

[@КантонЗилубанов]

Молодец! Хорошая работа! 👍

[@giovanninoventa6354]

Amazing job !!! You are one of the best creative workers

[@carlosgomesribeiro9569]

Venho acompanhando seus videos e fico maravilhado com os resultados dos seus trabalhos e quanta opção de ferramentas e quanto recurso, parabéns. Você compartilha de medidas desse projeto e de outros que você fez? Obrigado

[@fabricemenoud3296]

Vraiment excellent et tellement bien fait 👏👍

[@robertallaire432]

Je ne retrouve pas "JSK Koubou" dans les dernières présentation et je reste sur ma faim !

[@norarosamp3]

Your projects are amazing !!

[@JedediahSmith342]

The coolest sound here is the remote 😅

[@pirron1966]

Super , gefällt mir👍 Ohne Worte und trotzdem verständlich , vielen Dank

[@ecaff9515]

Excellent video and process. Thank you for sharing.

[@antitheist9976]

Precision: I am hard to achieve. JSK-koubou: Hold my beer. Seriously though, amazing and beautiful work, a true pleasure to observe. A master at work. 🙂

[@LaelsonMachadodaSilva]

Seu talento é fantástico. Eu estava com saudades dos seus vídeos, você é excelente no seu trabalho, tem idéias brilhantes, Parabéns! obrigado por sua dedicação!

[@salvadorpinon6506]

Cómo siempre muy buenos tips, para nosotros los aprendices de carpintería, me encanta su trabajo

[@claudej55]

Encore une idée de Genie a vous prendre. Merci a vous

[@marceloquintanilla4777]

Que excelentes tus trabajos SOS UN CRACK

[@joevip76]

This is exactly what I want, thanks for sharing.

[@ibkawan1652]

Thanks a lot. Now I hope to see how you turn a grinder into a milling turner. I am very clumsy and I'm sure that without advice, I'll break the whole thing.

[@NestorPineiro]

Hace años que veo tus videos y siempre has hecho un trabajo impecable! Estaba viendo la relación del diámetro del plato de lija y el motor del esmeril... No crees que deberia ser de al menos 1HP?

[@rjung_ch]

Alle deine tools sind super Klasse! 👍💪✌

[@viorsa8200]

Excelente proyecto muy bien desarrollado y mejor ejecutado maestro,un vídeo muy largo para mí gusto, pero entretenido, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un merecido like desde Narón (Galicia)🔝👍🤓😜

[@kingnothingfpv2303]

You should make an ornithopter build video for sure...!!! That will be a hit...

[@Владимир-э9ь2г]

Молодцы!😮😅😊😊🎉❤

[@Gus0046]

Muy buen trabajo. Te felicito 👏👏👍

[@fouadsharif2327]

Sorry I forgot to say...well done Sir.....keep up the good work...hats off for you

[@woodworkingtoolstv]

best tool

[@jorgerojas-tp7ve]

Imposible no quedar fascinado ante tanto profesionalismo.....me deleito con sus creaciones....guauuuuu ❤

[@pompeusantos5795]

na maioria o custo na fabricação fica maior que comprar uma ferramenta de marca boa , mas vale pela qualidade dos trabalhos que ele executa so não precisa colocar os dedos para tampar as medidas

[@ebrahimfaiz8522]

Inspiring... your job is to the level of standard setting. While I enjoyed it watching on youtube the pleasure of doing it was your share for sure.

[@MUNDHIRALKIYUMI]

Great video thanks for sharing 😊 I watch you every day now

[@FranzSauer-l1k]

Sieht toll aus.. danke ❤

[@antoniorp4462]

Ótimo trabalho de máquina de marcenaria. Obrigado

[@SergePlaisance]

素晴らしいですね....質問に答えられないのが残念..... Subarashīdesu ne. ... Shitsumon ni kotae rarenai no ga zan'nen.....

[@sudhanshuparihar8437]

बहुत ही सुन्दर ❤❤❤❤❤

[@henrysiegertsz8204]

Outstanding job!

[@jasonrichards7748]

Awesome video keep up the great work

[@АлексейКотов-ь1в]

Благодарю вас за все видео.очень полезно.

[@nestorramalhorozpoveda9072]

Genial , como sempre 👏👏👏👏👏👏👍👍👍👍👍🙏🇧🇷

[@MrPatdeeee]

Another heavenly Gem. Where every step is shown with NOT one voice. Wow, do I like that. I wish all other DIY's would do that. Because, in essence, they are being egotistical. And they talk much more than show us. But JSK is the awesome DiY'r all over in this. Thank you kind Sir. ---------------------------------------------------------------------------------------------------------------- もう一つの天の宝石。すべてのステップが 1 つの声ではなく表示されます。うわー、私はそれが好きですか？他のすべての DIY もそうしてくれればいいのにと思います。本質的に彼らは利己的だからです。そして、彼らは私たちに見せるよりもはるかに多くのことを話します。しかし、JSK はこの点において素晴らしい DiY's です。あなたの親切な先生に感謝

[@indiorodigues]

A nova maneira de divulgar vídeos anteriores ficou muito eficiente, parabéns!

[@DIYKhôngChuyên]

Thank you

Hey that's nice! Could you turn a table grinder into a lathe? That would be very cool

[@albertmunozc8362]

Amazing! Literally, I want to do this project this weekend. THank you a lot. I will add this video to my references to make my own idea.

[@waterboy8999]

Nice work.

[@karlosgrizz356]

Muy buena idea y muy buen trabajo, lo estaba esperando. Desde Buenos Aires, Argentina un saludo.Gracias.

[@ivanwunder7792]

Уважаю твою аккуратность и умение, только вот смотреть тяжело, блин завидно, ты бы уж хотя бы разок накосячил что ли.😀🤭👍👏

[@adonisjunior85]

Muito bom!!!!!

[@springfielddews]

What can I say JSK, your incredible. Regards

[@carlosrojas2707]

Excelente. Gracias 😊

[@toranosukeijuuinn]

グリーンメタリックにJSKのロゴ、いいね。

[@martingutierrez1155]

Disfruto cada uno de sus videos gracias por compartir saludos

[@DIYFALCON]

leavel of creativity 🎉

[@DraganIlich-r1s]

Thank you very much Sir 🎉

[@billsmith8306]

You're the Best!

[@RixtronixLAB]

Creative video, thanks :)

[@smotripro9142]

Perfekt, bravo👍

[@prasadvn524]

Well made tool.

[@nikonwolf]

great work

[@yassergohiny4691]

Perfect job

[@RustyInventions-wz6ir]

Nice job

[@БулатБасыров-у2щ]

Отличная работа Булатеый лайк мой👍

[@jhonalejomoreno]

Hola soy un seguidor fiel de sus herramientas tas caseras desde donde usted hace esas herramientas que pais

[@strangersound]

Makes me want to be a Makita fanboy. ;)

[@robi-wo9mc]

Is this a chick doing this??? I'm impressed. Very nicely and neatly done. Subscribed.

[@InternetManBaby]

So great!

[@user-pj5ek9jh4f]

잘보았읍니다 만들고싶내요 도면볼수있나요

[@СергейЖалимов-ы2т]

Шедевр!

[@ahmeddaniel1258]

Can you tell me how it is made or where you bought the handles shown in minute 16:50 minutes. And also in a minute 21:28.

[@mohsenamani1291]

Perfect, as always

[@iamomid]

This guy puts a threaded insert in any hole he sees

[@21ventuno79]

Perfect!!!!

[@spydermag5644]

Do you make prototypes before making your tools on video? Is it extensive planing and then to video?

[@DomBaiocchi]

Muito bom!

[@djukabazuka8446]

Thx.You are the best. What is the name of the adhesive tape you are using?

[@francisconascimento2034]

Fantastic very good BRASIL

[@zake1571]

Well done.....

[@giauhuynhvan2056]

Thanh that chia buon tran dong dat den nhung gia dinh cua nuoc ban

[@lennyf1957]

12:20 why did you need to draw that have circle on that piece of plywood? As well as similar circles on pieces of plywood earlier in the video.

[@fabiomorassi9974]

Top !

[@algervlad]

What is the power of the grinding machine?

[@Boreshco]

👌

[@АлексейСав-ю6г]

Куда делось видео про изготовления очистителя воздуха в мастерской?

[@mariocrisolli7577]

Amazing !!!

[@markduggan3451]

Very impressive.