6-meter Inverted Delta Skeleton Slot Antenna ~ 03/06/2024

Speaker/Presenter: John Portune, W6NBC
Documents (including slideshow): www.dropbox.co...
===========================================
Radio Amateur Training Planning and Activities Committee (RATPAC) comprises Amateur Radio Operators of a wide variety of backgrounds and experiences. Together, we host nationwide Amateur Radio Zoom presentations twice a week, Wednesdays on general radio topics and Thursdays on amateur radio emergency communications.
Our Website- www.ratpac.us
List of upcoming & previous sessions- tiny.cc/ratpac-...
Facebook- / ratapacfb
Twitter- / ratpacp
The topics are selected from audience recommendations and the planning committee then seeks topic experts or discussion panel members. The presentation audience consists of thousands of amateur radio operators worldwide who participate directly in the Zoom sessions or with video links of the presentation and related documentation sent out after each session. Please complete the form on our web page to suggest a topic or speaker for future sessions.
Join one or more of our Groups.io to receive notifications and participate in related discussions:
Wed & Thur live ZOOM Link- www.ratpac.us/zoom
RATPAC - groups.io/g/RA...
NewHams - groups.io/g/Ne...
EMCOMM - sec-emcomm.gro...
Please be sure to include your name and call sign when registering

[@hygri]

That was an eye-opening lecture, thank you John, and thank you Dan & RATPAC - this has fired my imagination in a new direction. Your HF dual delta-slot with a tuner the bottom is ingenious and it'd be fun designing a high-power tunable reactor / phasing network for the bottom - this VHF design is very interesting too, now I wonder, for UHF one could build a derivative of a slot-fed Yag-Uda using this as a feed.. A bit of tunability would go a long way, especially at 13cm... EZNEC awaits for sure. Lots of EZNEC, and bits of metal. I suspect I'll build the HF and VHF anntennas, and likely some higher band stuff too. Great lectures as always, cheers all.

[@W4BIN]

One class of TV transmitting antenna are vertical slots in a large pipe, horizontally polarized. Copper is superior to aluminum for all antennas, as joints in copper (soldered) do not suffer any corrosion effect that aluminum (clamped/bolted) do. Ron W4BIN

[@Fraksional]

John, I bought your Kindle e-book! Requesting just a few more slides... I'd love to see a circuit diagram for the relay switching you used for your Double Delta Slot. (I'm thinking about just going on to try it. But I want to be sure I get corrected design that the slot is ended inside the remote tuner. It does seem that any balun would form the slot placed after the tuner at the coax. Did I get your instructions right? Or, do you only use one of the two Delta slots at a time?) Also, without the consideration for convenience and weather, why wouldn't a remote antenna tuner always be best, resonant or non-resonant? (I understand not to burn up coax with an indoor antenna tuner for non-resonant antennas.)

[@WECB640]

Skip the first 8 minutes if you don't want your ears to bleed.

[@Fraksional]

What high pitch tone? One benefit of miltary service took out those audio frequencies about 40 years ago.

[@WECB640]

I'm sorry for your loss. Thank you for your service. @@Fraksional

[@Fraksional]

@@WECB640 It was my pleasure long ago. 73

[@galaxy0088]

If you are running power a 2:1 swr will cause problems

[@bussi7859]

Why use a heavy , weak and expensive metal when aluminium works great. QLF and 99

[@k7rex]

I have no clue why he went with copper, but he does address other materials, such as aluminum, closer to the end and says it is much better. He also talks about other materials including some about using plastics.

[@hygri]

HIHI QLF

[@Andy2e0ree]

Sorry love to watch but the high pitch tone was just to bad 73 de 2e0ree