6 Reasons why you should consider the John Deere 2032R

[@onegoodturngetsmostofthebl7499]

I’ve had two 2R Series Tractors, and can attest to the fact that the tractor design and controls layout is better than the JD 1, 3 and 4 series equivalents. JD need to standardize it’s Sub Compact, Compact and Utility Tractor lines with the same look and fell as the Two or Five E four cylinder tractors. In 2025 I trust they’ll announce a new Three R Series complete redesign including: four cylinder Yanmar diesel, Power Reverser, four range transmission, Suspicion Seat, MSL Loader, Longer frame for more more leg room whilst turning backward, etc.

[@user-ye2hh7fj3o]

The cows seem to be enjoying your instructional feedback.

[@davidr3246]

The cows were like your own studio audience the way the were lined up and watching, clinging to your every word. 😂

[@WesternEquipment]

Hahaha yeah this was definitely a fun one to shoot. Too bad this was before we were doing bloopers!

[@WesternEquipment]

Looking to get fed! We had to redo several takes because they would come in and interfere with the shots.

[@dragonbornthuum4278]

Nice video, I have a 2018 2038R and love it. It paid for itself this Winter!!

[@WesternEquipment]

Thank you! That's what we like to hear, success stories are great! Thanks for watching!

[@geraldhaury4199]

Brent, you forgot the most obvious reason, they are an absolute blast to drive and use! Happy New Year!

[@WesternEquipment]

Happy New Year Gerald!

[@pruitt3507]

My brother has a kabota, biggest complaint i have with it is the petal placement on the hydrostatic. I cant use curse all the time so after long day, my leg had taken a beating. And i run 3-4 miles a day lol

[@WesternEquipment]

We hear this complaint a lot about Kubota!

[@winkdinkerson7190]

You realize the 2032/2038 series 2R tractor spec can be ordered with a 220R MSL loader with 1,377 LBS lift capacity that blows the three series capability out of the water.

[@billburkhart]

I'd really enjoy seeing a 2038R backhoe demonstration. Otherwise nice video.

[@WesternEquipment]

Bill we will try and get that on the list of videos to film. Thanks for watching.

[@donaldpedigo296]

....Very Good Overview of this tractor....

[@WesternEquipment]

Thanks!

[@tomcarter9816]

Excellent video, very informative, and I see this tractor as a good upgrade to the 1025r. I assume it is 4wd also?

[@WesternEquipment]

Yes it is! Thanks for watching!

[@allanpyne9647]

I have not seen a video yet of ,a 2025r and a 2036r side by side comparison on anyone's channel.I know the 2 have different frames all together.Given your height so I can see the size of the tractor.From my perspective I'd like to have a longer wheel based tractor possibly an air ride seat.To comfort my back thank you ...Where I live we have a JD but they only have a limited inventory of units,'d have to drive a distance to see for myself and the weather is terrible at this given time.

[@WesternEquipment]

Have you gotten to see the 2025R and 2038R compared yet??

[@marksleeper3752]

great vid was the seat all the way back im asking because i a big guy any info would be great thanks Mark

[@WesternEquipment]

Well I cant honestly remember since we shit this video so far back. I can say I'm a bigger guy and I fit comfortably on these tractors.

[@danielsharon524]

Subscribed. Not sure if you have the capability to do this, but I'd love to see a comparison between a 2025R & B2601.

[@WesternEquipment]

If we can get our hands on a B2601 we will do this! Thanks for watching!

[@SNeal5966]

What is the rear end housing constructed of? IS this a cast aluminum model or are we talking cast iron or cast steel?

[@WesternEquipment]

This is die cast aluminum. Pretty common in compact tractors.

[@SNeal5966]

@@WesternEquipment I was reluctant to accept the cast aluminum but apparently that's stronger and cools better than cast iron so I dunno.

[@dave434]

Looking for a good used 2032r, what should I expect to pay for one. Range?? Thanks!

[@dave434]

Brint, Hope I spelled that right, I hope You'll take a minute and answer me on this. I found a 2014 2032 with 1044 hrs on it. Salesman says it has been well taken care of by the service record. I got them down to 18K , would that be good buy or could it be lower?? I'm serious about it. And could go some more then my offer of 15K. Thanks for any help. Dave

[@dave434]

Guess he was to busy, Never got a reply.

[@coziii.1829]

So what’s the difference between this and the 2038 besides horsepower.

[@WesternEquipment]

That is really the only difference.

[@coziii.1829]

Western Equipment Thanks I was comparing the two Looks like lower price of this one then the 2038 . Since all is same but horsepower which is not much difference for me .

[@deerrudy]

im still on the fence on what brand to buy. But I think you were really trying hard to find selling points on this machine. Seat, and color of levers ?

[@WesternEquipment]

I feel like operator comfort is a big seller, especially if somebody is going to be using the machine for an extended period of time. The lever color is to show the ease of use. I don't feel like these were a stretch, in my opinion they are very important.

[@StuffBudDuz]

Well, you GOTTA show it DOING something!?!?

[@WesternEquipment]

True, we should have done that. Next time I will. Thanks!

[@mrbubetube]

oh, I thought that hole in the seat was a fart hole

[@WesternEquipment]

Looks like it had a second purpose we didn’t know about!

[@runnikee6986]

Isn’t the fart hole part of the driver and not the tractor?

[@micahreese982]

Can you actually work on it yourself?

[@WesternEquipment]

Of course! John Deere offers service manuals for all of their equipment!

[@JohnSmith-lw2bm]

Uh no, you can’t. You can maintain it. But not repair it.

[@Pat-Van-Canada]

this is why I clicked on this video. Crony capitalism from John Deer with no right to repiar