6 TOOLS I REGRET BUYING, YOU MIGHT TOO...

Please remember to subscribe, torque like and tap the bell to get notifications for new uploads!
Share if you know someone who may be interested in this content!
If you are tool shopping, Check Out My Amazon Store, with several lists to browse, Daily use Tools, Power tools and Specialty tools for Home or Professional repair use.
www.amazon.com...
Below is a list of affiliate links if anything might interest you from this video. Using them will cost nothing extra, but it will help add content to the channel!
I can supply an affiliate link for anything you may be interested in, just let me know in the comments. It costs nothing extra but helps support the channel, adding content! Thank you!
If you'd like to contact my GearWrench Dealer and buy something from his truck, he can ship. He carries GW, Milwaukee, Grey Pneumatic, Lisle, Sunex, OTC, Powerprobe and much more.
His email:
[e-mail]
My KZbin contact email;
[e-mail]

[@FastRact1984]

These are literally the tools I use on a daily basis and probably couldn't get through my day without. Except for the oil sender crow foot contraption, no one needs that.

[@JimmyMakingitwork]

Haha, Thanks Frank!

[@ecleveland1]

If people stopped and looked hard at their tools and picked out the ones they used all the time and the ones they used some of the time their toolboxes wouldn't have to be so large. It really is amazing when you stop and take count of what you actually use compared to what you thought you would need and use.

[@johnb1121]

FACTS probably only uses 5 draws

[@JimmyMakingitwork]

Very true! I think mechanically inclined people like to tinker and like tools, so we buy a lot we’ll likely rarely or never use. No harm if we can afford it!

[@nonya1588]

The ball hexes, are a life saver, if you ever need em. PTO face covers on....well PTOs, on Allison automatics. Use the shit out of mine, but not everyone works on roll off trucks.

[@JimmyMakingitwork]

That makes sense Ben, thanks!

[@johng1077]

Jimmy I have a lot of respect for people that are willing to say they made a mistake on a tool purchase and go on youtube to tell the world, no more needs to be said.

[@JimmyMakingitwork]

Thanks very much John!

[@dc5723]

Same here Jimmy but I bought tools years ago and find using them today after sitting in the box, untouched.

[@JimmyMakingitwork]

Yeah, I have too many myself. But some day they’ll find a use I hope.

[@DudeWheresMyCurve]

Dear jimmy, I am an avid watcher of you but, Every tool has a purpose Jimmy. If you think about it, there is always that one type of vehicle that someone made a tool for. I use ball torx religiously on diesels. I refuse to waste my time trying to get tools to fit. I need a one and done, this tool will get the job done, right? But maybe the rule should be don't buy the set. Just buy as you go. What do you think?

[@JimmyMakingitwork]

Yeah, like most tools, they will serve a purpose at some point. Just want people to think it thru and buy more important tools first based on their own needs.

[@heatherr6433]

Subscribed! I do think since we are all mechanically inclined/fascinated we love to check out tools and want to try new designs.

[@JimmyMakingitwork]

Yeah, anyone who likes to tinker, or make things work, loves tools. :)

[@billbeckett1021]

I too have bought tools which I thought would be nice to have. Now they sit in a drawer taking up space. I thought about getting rid of them but then I would probably just buy some other gadget that would be sitting there talking up space. It’s what mechanics do!! Great vid Jimmy

[@JimmyMakingitwork]

Haha, very true Bill! Thank you.

[@javierosorio5169]

I just order the cornwell SAE ball hex set. To use on my 2007 Harley Davidson fat boy

[@JimmyMakingitwork]

That is a good set, especially for that purpose!

[@cliffshenkel7350]

The oil pressure sending unit socket I have. I’ve only used it on the 4 WD, 4.6 & 5.4 Fords

[@JimmyMakingitwork]

Yeah, I'm sure it will come in handy eventually. :)

[@itsatoolthing6323]

Jimmy this video) I've got these tools I haven't used in a year or so. Another mechanic) I like having tools that could come in handy to get the job done. Jimmy next video) if you don't use a tool at lest a few times a week save save your money. Just barrow them from the other mechanic in the shop. Just make sure you brake the tool, leave the tool greasy, and don't return to the owner when your done❗🤣

[@JimmyMakingitwork]

Haha, exactly! Wait…

[@WhuchakaV]

Ball hex saved my butt with poorly positioned gas strap one time on a tractor but my set was maybe 10 dollars and old husky haha

[@JimmyMakingitwork]

Yeah, I use the longer ones here and there, but the mini set, not yet at all.

[@spawnandbatman6975]

I feel like alot of hand tools don’t get as used like they used to years ago because of all the pneumatic and electric power tools and ratchets. They seem to make the job much easier. I haven’t seen one mechanic video with someone not owing a Milwaukee 3/8 electric ratchet or snap on etc. then you have the swivel sockets that do wonders so i see a lot of basic tools not being used much anymore lol. I see guys at my work always using a ratchet wrench to break torque even though that’s not what’s it’s meant to do but hey to each there own. Is still use my regular wrenches on a daily. 😂

[@JimmyMakingitwork]

Very true! Thanks!

[@shaynestates199]

I regret buying any Matco or Cornwell tools but 22 years ago we didn't have Amazon.

[@JimmyMakingitwork]

Yeah, I prefer Cornwell Over Matco, at least they make most of their own tools…but there are much less expensive options for tools that we don’t beat on every day for sure.

[@_P0tat07_]

I got 50% snap on stuff in college. I maxed out the purchase limit but I haven’t used 90% of the tools. Buttttttt I’m definitely one of those guys that uses the “id rather have it and not need it” excuse 🤣 I partially blame one of my professors as he was a massive snap on fanatic. I think he encouraged me to go with all snap on. Oh well. I’m sure I’ll use everything at some point 🤣

[@JimmyMakingitwork]

Yeah, they make great tools, but SOOoooo expensive. I used to be all SO too. Those days are gone, lol.

[@davidhull2060]

I bought a set of Genius SAE ball hex sockets last year. I didn't need them because I'm in England, and I cannot remember the last time I worked on anything that was not metric....there was just a gap in my toolkit and they were cheap. Ironically they have saved my bacon twice...enabling me to dismantle and refurbish a couple of central heating water pumps without calling a plumber!

[@JimmyMakingitwork]

Yeah, they are the kind of tools that some day, if you remember you have them, they just may come in handy! :)

[@U_ever]

"LIKE" button torqued to manufacturer's recommended specification. "CLICK". So when do you rest if you're bustin' hump 7 days a week ? Remember, all work and no play makes Jimmy a dull boy!

[@JimmyMakingitwork]

Haha, thanks! I take a few hours off here and there. Once in a while I take an entire day. I will take a few off thru the coming holidays though. :)

[@JAERepair]

I was able to acquire the rbrt Foreign object removal tool set at reduced price from my dealer. We both later found out that the grip edge set includes left handed drill bits that match the rbrt set. However, Mac does not have access to these. Nonetheless, ive been able to use the tools when certain apprentices have busted oil pressure gauge attachments within the engine block. Nice to have solutions for others' mistakes.

[@JimmyMakingitwork]

They are handy for sure! Thank you.

[@gtcam723]

Lock picks take practice. Once you get the hang of them, it isn’t bad. But it takes A LOT of practice. Lockpicking Lawyer on here picks a LOT of locks Those ball end units, I bought long ones but it was for non-auto uses. Specifically, the 5/32”

[@JimmyMakingitwork]

Yeah I’ve seen some of his videos. Amazing. Thanks

[@mlieser1230]

I bought a Snap On metric low clearance socket set. It comes in a blow molded case and has a 5/8 ratcheting wrench with hard plastic handle. The sockets are retained in the ratcheting wrench with an o-ring. I bought it over 20 years ago and I used it once. The retaining o-rings are dry rotting. Looked like a good tool to have at the time of purchase.

[@JimmyMakingitwork]

Yeah, I think when we just like tools and our mind embraces a purpose, we buy them…then they usually sit. Hopefully to be used some day. Haha

[@ozzynmyrtle]

i have the vim dd3 its the 3/8 version of yours i love it use it all the time when you pop out the anvil its a 10 mm ratchet

[@JimmyMakingitwork]

Awesome, I bet the larger set is handy!

[@andyanaoutdoors2487]

Man I could use that little bit wratchet doing small engine repair to pull carb jets without removing carb.

[@JimmyMakingitwork]

I hope it comes in handy some day. It’s made by VIM and much less expensive thru them on Amazon.

[@rayherrera3205]

Ratchetes i have so many of them and my go too is still my flex head 3/8 snap on

[@JimmyMakingitwork]

That is a very popular option. Thanks Ray!

[@cindyeva7454]

Lol,that sending unit socket I had to borrow from my boss 1 day,1 use in 2 years but you had to have it for this car

[@JimmyMakingitwork]

lol, that sounds about right for that socket!

[@aussiehardwood6196]

Longer ball hex can be very useful. I'll help u dispose of useless tools, I'll take the MAC rbrt set and the little micro VIM ratchet. Let me know where to send muh postal details. Mo seriously good video. Not all these fancy little boutique tools are suitable for every one, some aren't suitable for ANYONE. But we're lucky today withore choice than ever before.

[@JimmyMakingitwork]

Exactly! I just want people to not impulse buy so much, trying to keep myself from doing it as well. Have to watch my own videos, lol.

[@gregblau8082]

I just got that ball torx set. Had 2 cars in the last month where they would have more than paid for themselves. Also if you ever have to do an oil sender on a pentastar v6 you'll be glad to have that socket.

[@JimmyMakingitwork]

Thanks Greg! If you do get them, buy the VIM set, $23 vs $75 on the SO truck.

[@gregblau8082]

I got them from matco for $56. I had seen them cheaper but he hadn't heard of them and spent some time looking into it so I threw him a bone. I've been at this shop for 3 months and the snappy man is pretty inconsistent so I'm investigating in a good relationship

[@Scott_69HemiDart]

Great info, thanks! A couple of those I have looked at, now I know 👍

[@JimmyMakingitwork]

No problem Scott! Keep in mind that it isn’t bad to own them, just not when there are more important tools we need. :)

[@Rosecityrenegade90]

I have the vin DD2 mini ratchet I'm a RV tech and I use mine quite often another it's definitely a specialty too not gunna be needed every day but definitely worth adding to your box!

[@JimmyMakingitwork]

True, many tools will be needed eventually, just not so often.

[@mikebutcher2024]

One of the dumber wastes of my recent money was buying a lock pick set to break into my storage unit master padloc (keys locked inside). Practiced all afternoon on another master lock and didn't even sniff success. All that effort to avoid cutting a $3 padlock..lol I ended up cutting it of course.

[@JimmyMakingitwork]

lol, that sounds all too familiar. I bought my set for the shop years back. We had guys locking keys in the car, I though I’d be magic man…nope, just pixie dust. lol

[@randyduncan8863]

Ya I bought those rbrt extractors an I tried them on bleeders on calipers an I break the tool every time those small sizes are just to weak in my experience

[@JimmyMakingitwork]

Allen bit tools really, the name extractor always makes me think they remove stripped Allen fasteners. But the designer says to use them on good Allens too. Hmmm

[@georgeferlazzo7936]

Hello again Jimmy Thank you for another Great Video 👍 I have a Gearwrench ball hex tools. Just as you said, I have it in my still haven't used it, yet. Oh well, I guess, I am following in good foot steps 😆 Again thank you

[@JimmyMakingitwork]

Haha, thanks George! Want to help others know to at least put off these kinds of tools until they have all the ones they’ll use more often.

[@ramiropreciado-gallardo98]

I've gotten three door locks open with that Matco kit; Ford. Might be luck based.

[@JimmyMakingitwork]

Man, I wish I could say that. Maybe you should give a class, haha!

[@theinfamousb-ran5729]

Aye Jimmay! I used to pick locks quite a bit for my previous career. That set looks nice, but it does take some practice to use them. Unless you’re trying to unlock a gas cap, or a glove box they wouldn’t be super useful for a mechanic. It would be easier to use wedges and a rod. I have ball end sae hex bits from icon and I don’t like those, even with just a slight angle they seem to round fasteners. Maybe I’ll try the gear wrench.

[@JimmyMakingitwork]

Yeah, that's been my experience! Thanks B-Ran!

[@Fedwrench]

I have to say that I've never considered buying a lock pick set. Of course, someone else made it for Matco. Since Matco only makes some of their toolboxes and none of their tools. I've used my VIM ratchet adapter more than a few times as a mini ratchet, a crowfoot, and stress reliever. I like it. The snap on oil pressure switch crowfoot is handy on some Chryslers. I've used the VIM made ball torx bit set on everything from TPMS sensors, to ignition switches. It's a great little set. I think if you're in the rust belt or deal with a lot of broken fasteners, the RBRT series can be a lifesaver. Eric O has used them in more than a few of his videos but, if you don't deal with rust or broken stuff, they might not be worth their price. aside from the lock pick set, your selections fall under the category of, it's better to have it and not need it, than to need it and not have it. Thanks for sharing, hang in there, gravy's coming. Now, row faster.

[@JimmyMakingitwork]

Thanks very much for your input Fedwrench!

[@terryharvey4811]

I've used the gas cap pick twice that it did work and many times it did not. It came in a slim jim kit I bought in the 80's. How about the tool you needed once and you bought it to never need it again ?? Or the one you needed and made do without and then bought it only to let it collect dust in the back drawer of your box for 20 years??? If you do this very long, you tend to buy tools that LOOK like they would solve a problem that may never occur. Better to have it when you need it than need it and not have it. I bought the 1/4 drive blend door trick ratchet because I do a lot of that kind of work, but still have not used it yet. BUT. BOY HOWDY IF I NEED IT I GOT IT. That's if I can find it......Know what I mean ????

[@JimmyMakingitwork]

Haha, exactly right Terry!

[@simms196]

I too have regrets with some purchases: the Icon ball end Allen's seem too loose & rounding concerns, looking to get a good replacement for them, non rounded. Also have a larger vim 1/4 flex ratchet w extension very nice no regrets yet but will see how much it gets used compared to others. Nice video 👍

[@JimmyMakingitwork]

Thanks for the input!

[@reconbbs360]

Send those Gearwrench SAE ball hex bit sockets my way lol.....SAE is all I deal with. Not a single metric tool in my box.

[@JimmyMakingitwork]

Haha, you do machines, Harleys? …thanks Matt!

[@reconbbs360]

@@JimmyMakingitwork Im a bowling center mechanic. Brunswick A's. Installed in 1956 and still kicking. All SAE.

[@johnn2557]

I do use my Snap On ball end allen bits pretty often but not daily. They are the long style, and I did not pay full price for them!

[@JimmyMakingitwork]

That is the best plan I think, longer versions and a good deal!

[@Antonyg2100]

Need to have the Lock Picking Lawyer try that pick set #lockpickinglawyer

[@JimmyMakingitwork]

Yeah, I bet he could get it to work for sure!

[@Toolaholic7]

So far one tool purchase I regretted buying,The Texas Twister.A huge waste of money.Tried it on a GM wheel bearing removal,did not work.Came loose during use tightening the jam nuts up very tight.The Tribus Tools ratcheting O2 sensor wrench,broke it twice and Tribus is out of business now

[@JimmyMakingitwork]

Yeah, those are some to avoid for sure! Thanks Walter!

[@Munchiie]

Great video

[@JimmyMakingitwork]

Thank you!

[@deandresimpson6948]

I wonder how europeans can work and “survive” with 5 days /8h of work /week and a Us or Ca guy must work 7days/week !? Who lives to work and who works to live ?Great video Jimmy 👏

[@JimmyMakingitwork]

Very good question. I work more to build something for my family and improve our standard of living. It's voluntary and we are doing well, I like feeling like I've gotten something done each day and take time off when I think I need to. At the end of my life, when I'm thinking about my journey one of my goals isn't to say, "That was easy," but rather "I hope I made a difference."

[@deandresimpson6948]

@@JimmyMakingitwork may i ask you What swivel impact sockets do you use ? Are you plan to Find a replacement for them or are a keeper?

[@625jeffrey]

I think VIM is the manufacturer. There stuff is made in taiwan but I don't think they re-brand anything

[@JimmyMakingitwork]

I am not sure, I have heard they do rebrand some tools, but not all. Maybe CP or Mid Atlantic tools knows for sure?

[@Jordan__Sloan]

When your good like Jimmy you don’t need gimmicky tools

[@JimmyMakingitwork]

Haha, thanks Jordan!

[@petergarofolo9385]

Good video Jimmy 👍

[@JimmyMakingitwork]

Thank you Peter!

[@ThacMan]

Doodly-doo got his pink slip today. In case you haven't seen it yet.

[@JimmyMakingitwork]

Yeah, I saw that, kind of shocked. Either a filming for KZbin conflict, which I've had close calls with due to viewers contacting customers, forcing me to edit more carefully. Or his shops owners are cutting costs to hire less skilled mechanics. Which is a terrible long term plan. He should have a plan to open his own shop I'd assume, but he needs the job for content at this point they feed each other.

[@drew5992]

Make another regret video/favorite tools in the world video

[@JimmyMakingitwork]

Thanks Drew, will do!

[@stilwellstilwell]

How is the icon toolbox holding up?

[@JimmyMakingitwork]

So far I’m liking it a lot. Seems like a good value for the price.

[@meatballmagoo6134]

8 ball says yr channel will grow 💣

[@JimmyMakingitwork]

Haha, awesome to hear Magoo!

[@danielg3369]

Do you use other RBRT tools?

[@JimmyMakingitwork]

No Daniel. Joe has a couple others, I have to ask him if theyve done the job.

[@rcjames5286]

👍👍

[@JimmyMakingitwork]

Thanks James!

[@angelgarciaochoa2165]

I have a slim jim and a little kit way better that lock picking set

[@JimmyMakingitwork]

Yeah, I’ll get one of those soon. The guys here have them though, so I borrow them once in a while.

[@tedwilliams8766]

c'mon!!! they wouldnt make a tool if you didnt need it....right? RIGHT? :) those tools companies know all about us guys who want to be ready for anything and have everything. if they made a polished chrome turd and called it a "hose block" or "vacuum helper" and put it a black box with some fuzzy stuff with a cool logo on the front and sell it on the tool truck or a tool store....some of us would by it for, you know, just in case. ive bought a few of those "wonder tools"....as in wonder what i bought them for but ended up using them when they were the only thing that would have worked. as a home gamer, ive slowed down on buying regular tools and put my effort into the specialty tools for suspension, pullers, brake tools and such. with the way things are going, i want to be ready to do everything i can myself. remember people, if its f*cked, you cant f*ck it anymore by trying to fix it yourself and every tool has a hammer side.

[@JimmyMakingitwork]

Haha, very true my friend!!! Thanks Ted!

[@ianloyd6384]

But at least they look pretty, right? 😜😜

[@JimmyMakingitwork]

Haha, oh yeah!

[@jacobstacy588]

Matco doesn’t make anything but there boxes everything else is rebranded

[@JimmyMakingitwork]

Thanks Jacob.