60 Sketchup Tips and Tricks

[@SketchupStyle]

Get the Sketchup Style MegaPack here: sketchupstyle.gumroad.com/l/eanri You'll get every single Sketchup model featured on Sketchup Style KZbin Channel

[@bjarnepro8327]

this was 3 years of my highschool carreer in 16mins... I should send this to my old teacher

[@Facadeghimire1302]

"Your humor never fails to bring a smile to anyone face! Keep spreading joy with your content!"

[@delinquense]

Single best video on Sketchup ... You need to understand all of the 60 Tips and Tricks BEFORE starting any endeavour, like a course or a project. Bravo and so much needed!

[@JD-mc3bl]

Just realised I had wasted years of my time by not knowing these simple, yet highly effective tips. Top quality video👌

[@pesohernandez1091]

tip 18 has blown my mind, here i was trying to calculate spacing and do a copy and then move it to the correct space for creating slats on a table .. thank you!!!!!!!

[@juergen-schanz]

I have been working with sketchup for a few years now, and I know 50 of the 60 tips. But the remaining 10 tips are true timesavers. Thank you very much.

[@SJLV123]

Great tips, learned a few. By accident I found also something useful. Suppose you have a number of identical components but then while working you realize that a bunch of them need to have the same changes . You can then select all the ones which have to be altered and right click Make Unique. All these selected objects will now be the same new component. Changes can now be applied to one of them.

[@VibeXplorer]

Hands down the most useful Sketchup video I have seen yet. Delivered concisely. Learned a lot. Thanks!

[@diegobenito1877]

I've been working with sketchup for a while and i found your video very useful! Thanks

[@mpa-digitalarchitecture3210]

Always something to learn: rounding corners has always been tricky for me, also two sidebars... gonna give that a shot ;)

[@benwalters3825]

wow i never knew about new tray option, I would really like it if entity info was a tool bar that expands rather than tray item though....

[@sahashik7452]

Great!! I didn't know many tips. Adding unit after number in Scale tool!!

[@samuelkumbur2524]

Great

[@kimberbearly7909]

Knew all except one. Setting radius on a corner, Nice one.

[@trishensookraj6193]

This is an excellent refresher course

[@benwalters3825]

off topic-2 mins in , do you model in perspective/ camera ? i cant deal with it !!! now ill watch rest of video ! cheers

[@eduk347]

Keep up with the good work man! I've been using sketchup for 17 years and I just bumped into your channel and already found lots of useful information!

[@mipe7755]

55. I didn't know, despite almost a decade spent with SketchUp! Finally, someone who knows SketchUp like his own house!

[@florinm9825]

I literally need two thumbs up to click for this video. It took me many many years to learn half of the tricks you list here. And - guess what - now I'm having two vertical trays on the edge of the screen. Bless you! :D

[@peterharms17]

Incredible youtube vid!! When's your book coming out?

[@benwalters3825]

great video well done !,,,, some comments 1) tip 42 -45 should be top 10 tips , 2) re tip 31 and 47 , i don't like the changes SketchUp has made with hidden edges and calling layers tabs . 3) re tip 16 - I use copy paste in place when moving item into different group or component - (perhaps i should use outliner,?) i would prefer if copy paste in place were accessed my context menu. 4) i did not know you could have 2 trays ! 5) i did not know at least these 9,33, 23,24,37,40, thanks !!!!!!!

[@PaulineFerguson]

Absolutely awesome! Thank you. I definitely learned some I hadn't seen before. Saving this video so I can watch again later!

[@armandokeever9087]

Thank you very much friend, these tips are very useful, although I knew many of them, there are others that I didn't. I have a question, I hope you answer me: How do you zoom in and out so easily? I noticed that you can take a close-up of a specific area, for example a single section of the outliner or the preferences box. I know that using Windows Magnifier you can zoom in on the area where the pointer is, but that makes the entire screen larger, not just a singular area like you did. Thanks in advance Greetings.

[@oralevas59]

¡Guau! es impresionante la cantidad de información que nos has dado. Horas y horas de trabajo ahorrado aplicando tus enseñanzas. Gracias siempre.

[@Susheelar-n1f]

Thank you for this tips Good information ❤🙏🙏🙏

[@plasticonion]

A little fast but I probably only knew half of what you showed. So thanks a million

[@ireneuszkuropatwa8356]

it is the fastest sketchup course ever. You can literally learn sketchup from this video and start to model :D

[@dpv_2401]

i feel like this was exactly what i needed, ty so much 😤

[@Shimmernut]

Fantastic :) Thank you so much! There was plenty to learn

[@jennyhuang587]

Thank you its really helpful

[@ahmadwael7612]

amazing tips and a very useful video , your work is much appreciated !

[@thegamer9383]

Great work

[@eidmarcodesign7853]

thank you and love all the tips

[@АлексейПавлов-у2м]

Thanks man! Wish you all the best

[@mdkaif_india]

thank you for this video

[@rocky8004]

Awesome teaching Sir

[@masterrolly6278]

You are just the best. Thanks a lot sir

[@antonblam2]

I consider myself a pro SketchUp user and 23 and 32 blew my mind 🤯

[@juniperclary9233]

Wow, this was very helpful! Thank you!

[@madjedachour8097]

thanks to you, please more lessons

[@ana-marijamustac9930]

Odličan video :D

[@francoisbooyse8331]

Brilliant video. Thanks

[@RaelacqCabarang]

THANK U FOR THIS A BIG HELP❤❤❤

[@TheOriginalJake]

v helpful time savers. thanks a bunch!!

[@Psycho_synthesis2]

You are amazing.

[@tricky2k]

Very good tips. I know them all but because I've been using SU for many years, but this is a goldmine for newbies and not so newbies. I miss a good one, though. Ctrl-Eraser softens the edge. Shift-Eraser hides it. So far so good. Aaaaand, Ctrl-Shift-Eraser "unsoftens" (hardens?) soft/smooth edges

[@SketchupStyle]

Wow, great one. Thanks. I'll pin your comment

[@tricky2k]

@@SketchupStyle Thank you. Then you might like also this one. It's easier to do than to explain and maybe (probably) you already know it. You can rotate anything in respect to any edge. Usually you use a face to infer the orientation, but you may not have one matching what you want to do, but instead there's an edge there in the right orientation. Select the rotate tool, click on the edge and, without unclicking, move the cursor along that edge. The protractor will be oriented perpendicular to the edge. Then you can unclick and rotate as desired

[@SketchupStyle]

No, I can't say I knew about this one. Thank you

[@ahmadnaufal9033]

thanks sir, this video is enlightened me

[@paulazahan8550]

Very useful! Thank you!

[@makhan1961]

Excellent

[@nissebjorn9916]

Thanks for this video! Great job. Its helpful :)

[@evanqader1058]

Thank you so much it was very useful

[@yassineohd9096]

that s a really helpful video thanks a lot

[@TALESfromtheCREEPINOY]

Thank you

[@pedrorivera1892]

Thank you for the video!

[@vivekbhalala2506]

Great job 👍

[@delrodesigns6735]

wow this is so good! thumbs up for this

[@johanflodkvist80]

Amazing!

[@pinkrocksnovi]

Thanks for a very good presentation👍 Buy the way, are you from Croatia?

[@SketchupStyle]

Thanks, and yes, I'm Croatian

[@zansad878]

Super tips...awesome..

[@shahara551]

Tks for making video.

[@ricardoposada211]

Que buenos trucos ... mil gracias

[@indie3d]

Very good tips thanks for sharing!

[@vishnusamy2338]

Hi very useful and timesaving tips. Keep rocking. Hats off to you.

[@YSNDDN]

God bless you !

[@mdganiulhakimtanvir3215]

Thanks

[@AhmedSElShorbagy]

amazing thank u so much

[@ImranHusicic]

thanks :)

[@SebyIanasiFoto-Video]

thankkkkkk youuuuu god bless youuuuuuu thank u thank u thank u so much

[@THNX-q8l]

Great! .. Thanks a lot.

[@1440dvsone]

My favorite one you didn’t mention is that you don’t have to scroll through your scenes layers components etc. you can have them as tabs if you get rid of the default toolbar and make your own they nest as Tabs which is much easier than scrolling up and down with the menus on the right

[@jskup]

thanks, great and fast!

[@forceclosee]

Are there any tricks to make components have more than 1 tag for example, 1 wants to show a component in Scene 1 and Scene 2 and hide it in Scene 3 or should I manually make 3 duplicate component

[@085_abhishekraut8]

Very Informative

[@jaimecolodro1588]

good work

[@DF-te2vm]

Super cool

[@artirana2751]

GOOD ONE MAN

[@ThanhTon-e7c]

good job

[@ganubuilders]

Perfect 👌

[@besogogebashvili8212]

ty

[@FranCarreira]

Oh, how i wished i knew the 23rd before... Lots of times I used the calculator to get close to the percentage I needed to get the measure i wanted... (but that´s not the only useful tip on this video, althoug I have been using sketchup for 16 years now.)

[@Skans-Gustav]

32 and 33 where great:)

[@kusumaswetha9509]

what command is used to get trimble scan essentials toolbar in sketchup pro

[@RonaldJohnson-sh1he]

How do you dimension an object in sketchup 2024

[@anti_gravity8446]

Subbed!!!

[@RonaldJohnson-sh1he]

How do you dimension an object in Sketch Up 2024

[@RoiDiola]

14, 15, 16, 17, 18, 21, 22, 23, 31, 32

[@dezairestudio]

thanks for making this. The majority of tips is derived from simply reading the command prompt line. 90% is there. So my tip zero is: people read this line!

[@studioanakamak446]

thank you, the video is very useful, I hope my channel can grow,

[@jayvaddoriya2732]

Nice bro...

[@AnNguyen-om2ns]

cold

[@sajit63]

item 32. why does not the fillet operation happen after the enter, for me?

[@sajit63]

It happens now. I would not know what is the difference between before and now.

[@Thilinaliyanagevraysketchup]

good one..you forgot "cloth work" plugin

[@secession77]

13:19 - 48 - does it support changes in texturing as well?

[@AnNguyen-om2ns]

cool

[@viisteist1363]

is there any stress calculation apps for this ketchup?

[@noraelassaad3277]

genius

[@hetashvibhagat4865]

For Trick No 14. I am not able to enter Inches and feet while the default Unit is mm. Will the trick only work for m and cm?

[@maximumselfish]

Not a single trick I don't know) I'm cool. Thank you)

[@SketchupStyle]

Wow! Respect! ;)

[@maximumselfish]

​@@SketchupStyle THNKS! Let's get 60 or more tips for LayOut!.. That would be a really helpful video.

[@SketchupStyle]

Sorry friend,I don't use Layout AT ALL. I'm sure you already know more than me on that subject 😉

[@kimberbearly7909]

Same here

[@mixmorubio2439]

the 58 is plug in?

[@takeshimidori6372]

what spect your pc for sketchup

[@Vahan210]

Is this app available for android?