TIG Welding Aluminum Fabrication - Bump Form it and then Kick Back

Learn how to TIG weld and fabricate with aluminum here:
www.6061.com
-Welder settings explained
-Material selection
-Filler rod selection (type and diameter)
-Full shop equipment list with part numbers
-Practice exercises
-Tungsten type, diameter, and shaping
If anything isn't answered on the website 6061.com, feel free to email.
Order the TIG Button variable amperage finger controller here:
www.6061.com/ti...
Order a high-quality slingshot here:
www.slingshot-f...
Cross Check Torque Seal indicating paste: amzn.to/3JscFpD

[@6061]

All welding and fabricating questions are answered on the website www.6061.com The TIG Button variable amperage controller I use: www.6061.com/tigbutton.htm Crosscheck "Torque Seal" indicating paste : amzn.to/3JscFpD Thanks for watching

[@RonCovell]

The most elegant cup holder ever!

[@shutupstoopid4518]

Hey Ron

[@jamesa7506]

Indeed!

[@TlD-dg6ug]

Legend

[@vr6swp]

When Ron Covell compliments your work, you doing something

[@wayofthewrench]

You know you've done a good job when the Godfather of metal fabrication drops a comment like this. Cheers Ron!

[@MrGundawindy]

I stayed until the end just to see what ridiculous thing you fitted this too. I was not dissapointed. 😂😂😂 P.s that rotating table weld was pretty to watch.

[@Ryan-dz3jo]

Please can we have a trailer worksop tour?

[@kshofat4]

You sure you ain't a robot? How do you keep your hands from shaking? Badass work as usual.

[@boozeshoesNtattoos]

Add another one to the greatest hits playlist. Watching your process helps answer a lot of questions I haven’t even thought of to ask yet. Also, I got TiG Button for Christmas and to anyone debating whether or not to make the investment, do it. You will have no Regrets. Thanks for feeding us great content.

[@Rocksolidhandyman]

This is why my wife is mad at me for getting into welding, about $5,000 later and I’m making my own cup holder that I could buy for $25! 🤣🤣🤣💪🔥😎

[@scottymakerdude3827]

Once again, you don’t fail us on weld expertise, and entertainment!!!! Well done Aaron!! I’ve been debating on a TIG button from you. Thanks for the great videos!!

[@chris-graham]

It was a game changer for out of position welding for me. Mainly upside-down roll cage work

[@glenpiro313]

Get the button, you will not regret it

[@ObiGrantPhoto]

I picked one up about a month or so ago; wish I'd done it sooner, and I don't even weld in awkward positions!

[@scottymakerdude3827]

I have a hard time since I’m older to coordinate the foot pedal with my welding. I have to sit while I weld, so the foot pedal takes a front seat to what I’m welding, and sometimes it’s an inconvenience.

[@Tdunksmane]

I use a tig button every day at work. Worth it. Super nice.

[@billclark5943]

I prefer to place a 1/8" diameter dab of torque seal at the edge of the fastener as opposed to a bead across the entire head (as the instructions show). Much more pleasant to look at and still functions as intended

[@philpunxsutawney9411]

I second this !! At least don’t fill the drive hole of the screw !!

[@salloroc20]

I love the trick of not trying to close the gap on initial tack. Gotta remember that one for my next aluminum job

[@this_guy6965]

Hands down one of your best videos yet

[@facelessdorito]

I remember thinking “what ever he’s making is super important and has to be perfect” I was absolutely right

[@ronniemcroy6305]

Yes make another beer 🍺 run...

[@zkemp1108]

The most impressive part of this is when he peels that plastic in gloves

[@JohnDoe-rx3vn]

Hose clamp on that compass... someone else has discovered the disturbing lack of compasses that can hold a sharpie.

[@RyanAUS]

Did you notice how the dimes in the second half of the lap joint of the mounting bracket were spaced 1/64th of an inch further apart than the first half…. I can’t believe he would show that to the world 🙈 Very nice 👍🏻 🍻

[@natural_nc7230]

As an expert of all of humanity I have to say. You are the only youtuber that I have ever seen that have their priorities right. Thanks. Really enjoyed the video. Subscribed.

[@StraightLineCycles]

Your videos definitely are helpful.

[@rickfazzini22]

Just never know what you'll see when you open a 6061 video lol

[@brockstravels7586]

Its inexcusable to run out of beer...

[@jklololol9691]

Just noticed you’re a left hello brethren!

[@danmurphy5660]

So good. Your vids are the best mate. Cheers from Australia

[@CraigHollabaugh]

Excellent build, I especially liked the first filler tack for the tab. Thanks.

[@ElTelBaby]

@ 14:07 ROFL... Well it's NOT my 1st guess now... That being a Coffee Mug...

[@mugshotmarley]

Nice work (as always). Im totally lost with the green stuff on the screws... Nevermind, just looked it up. We use paint markers instead

[@bobbyplayscards]

Absolutely one of my favorite of your videos! When do we get a tour of the big rig?

[@6061]

Gonna be a couple more months probably... Still a work in progress.

[@jasonturner1045]

I thought you were making a coffee cup until you milled those drain holes in the bottom. Very nice cup holder

[@marcelo_rcosta]

Simplesmente o melhor final de um vídeo sobre solda de todos os tempos! 👏🏻👏🏻👏🏻👏🏻 Você subiu de nível, de um simples padawan para o cavaleiro Jedi do sofá sinistro. Abraços do Brasil! 🇧🇷

[@BrilliantDesignOnline]

I don't always fab a cup holder, but when I do, I make sure it is secure with torque-stripe.

[@ronniemcroy6305]

Yes another video & always good videos. 👍 🤘SLAYER EVERYDAY 🤘

[@viorsa8200]

Excelente proyecto muy bien desarrollado y mejor ejecutado , un magnífico soporte para vasos , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 🛠️ 🔝

[@walkingthruyourdata-6019]

Yes, must have item in production. without name $89.99. welded Name...$189.99. time is money folks!

[@charlienewman9824]

What is the green stuff on the screw Nice work

[@billl7551]

Wasabi

[@fr3akonwh33ls1]

The first time I’ve ever heard anyone speak on a 6061 video and it’s the best thing said!

[@alienature]

Cool fitup at 4:56 where you closed that gap while arcing the torch to melt the bridge

[@LordOfTamarac]

What’s the green goop?

[@6061]

amzn.to/3JscFpD

[@wadepatton2433]

Oh hell yeah, can't believe I just now got to this one--new favorite in the sixtysixtyone flavor. Bravo!

[@airmech404]

I'm far more in interested in the aluminum "Solo" cup you stuck in tht basic level cup holder!

[@alozano10241975]

Muahahaha!🤣🤣 I love just the sound don't know but reminds me Snoopy in Charly Brown

[@scroob72]

What ever we think he should be doing, Aaron is always one step ahead!

[@chief1761]

Im sure your reasoning makes sense but why didn't you just buy a piece of pipe? Is it like some weird dimension or what?

[@chucknorris2952]

Was worried you were going to skip the drain holes🙂

[@Craefter]

Wow! The whole room goes up and down during bending!

[@deltacharlieecho4732]

Part of me feels like I got trolled, but I'm definitely appreciate of the video.

[@igelfriesen]

Hello, what kind of Pen do you use? Have you a link for me, Thank you .

[@Hunteratloppshop]

Missed your longer format videos

[@forthwithtx5852]

Wanna hear the most annoying sound in the world? 3:55

[@TonyBarr99]

I buy WD40 by the gallon and spray pump it.

[@davesmith8936]

Another "WTF" video that made me laugh!

[@xLopez210x]

The damn motorized lazy boy at the end got me 🤣 I’m gonna make one in my lifetime

[@nathkrupa3463]

Hi Sir I Am New Subscriber.

[@wookieecantina]

Nothing but awesome!

[@jakelencher817]

if he wants something chances are hes not going to the store to get it.

[@zakokiller]

i thought fusion welding aluminum was a no go? ive always heard it cracks if no filler is added

[@6061]

Depends on the type of aluminum and how strong it needs to be.

[@ChrisR2517]

Hahaha... love the go-cart. a master craftsman: expert, adept, proficient, skilled, skillful, deft, dexterous, adroit, practiced, experienced, masterly, accomplished, demon, brilliant; informal crack, ace, mean, wizard; North American informal crackerjack; vulgar slang shit-hot; archaic or humorous compleat.

[@Jimmy_rigs]

What spray did you use to clean the aluminium at the end ?

[@heintmeyer2296]

In your face, Marcel Duchamp!

[@aust_out]

I love these videos so much

[@glenpiro313]

Well, this was the absolute daymaker man, Muchas Freakin Grassyass!!!! Please, listen to what Billy Idol says, and give us More, More, More. It doesnt have to be in the midnight hour or anything.

[@psiwog]

Don't care about the welding... I'm more impressed you can peel off that protective film with gloves on 🤣

[@futten3230]

whats that green stuff? some kinda screw locker?

[@6061]

amzn.to/3JscFpD It's used so you can tell if fasteners are staying tight by a quick visual inspection. It's used a lot in aviation on critical fasteners that can't be loose. It's all over the place on helicopters.

[@jeremiassanvitale3557]

Thannk's for the video!

[@Airman..]

Overbuilding like a Boss

[@garthbutton699]

Well I guessed wrong,like to know what kind of engine and exhaust is on that buggt,thanks for the video,always enjoy them🤗😎🤗😎

[@micheleseyfang8556]

Always a pleasure to watch your video's. Gotta get me a recliner like that! Nice cup holder too....👍

[@MrLucidity]

Called it! =) Every man needs a nice refreshing beverage, but what perfect companion for a chair like that, than a beer like that...

[@daniel635biturbo]

Whenever I put my TIG torch over my legs, it usually burns though my pants, and I get a burn mark in my calf. But I guess with training I can manage my pain 😂 Thanks for the video, and nice to show the rotary welding with the first few attempts !

[@DC_DC_DC_DC]

This and I would like to add that whenever I don't wear long sleeves I get mad sunburn. Would like to see a comment answering how he does both things this way

[@6061]

@D C -Turn torch away from leg -Don't weld too long unsleeved if you are using high amperage. Put sleeves on or use sunblock.

[@robertschulke1596]

His next project will be a tool holder to just drop it into.

[@mallcrawleroffroad-brandon9298]

🤘😂

[@СерыйСерый-ч6р]

The ending just killed me😂👍

[@PsychoJoker]

john wick haha

[@edgarsanandres3053]

6061 usted es la definición perfecta de quién es feliz y disfruta su trabajo 🤗

[@PetesGuide]

I’m convinced the gloves and face shield gag are a ruse to hide the fact that he’s an android. Damned fine dimes!

[@bigdawgsbusa2]

Pretty lkool definitely more beer lol

[@exhaustsauce]

👏

[@Deichwerkstatt]

Amazing Video! I really enjoy these

[@907buschmin2]

Is tig welding easier than mig? Seems like u have more control with tig

[@wadepatton2433]

TIG gives you variability on-the-fly unlike any other way of doing it.

[@li-ion5592]

cool car seat 😄😄😄😄😄👍👍👍👍👍

[@rickkelsch2040]

whats the green slime for?

[@jspriver]

I’m squinting my eyes as you are using the bandsaw to keep the metal filings out of my eyes…

[@lctachell]

trying to figure out the green goo

[@warddan2002]

What’s the green stuff?

[@vikdykyi]

😆😆😆😆👍

[@rustynail4676]

is your shop a refer trailer?

[@olivierc7949]

Hello, You could have made a heart for Valentine's Day!

[@jianbaiwang6625]

your cup holder is way more attractive than your motor car - excellent work!

[@fsj197811]

Well done, thanks for sharing!

[@sonhoang-fz2mp]

❤️💕👍💐😘😍

[@Hamid-az]

😂😂😂

[@weldermike7017]

😂😎👍

[@kul5315]

🤣🤣🤣

[@motik954]

😊😊

[@scatdawg1]

What does the title mean

[@hpk4917]

🤣😂

[@firewall7085]

😂

[@rkalle66]

I cannot recommend a cupholder just in line to the wheel. Wheels tend to throw dirt all around and into the cupholder.

[@thimitri1]

Awesome.. all you need now is a telescope and mount to check out those dark skies!!

[@AL6S00740]

just amazing :D

[@Charlieman.]

hahahaha. hair rich down low - but if you don't mind the smoke - it will add a little life.

[@convairb-3656]

The Lay-Zee-Rider

[@soundslikealot]

Great one! Can you please share your knowledge about TIG tacking aluminum? 🙏 A lot of times you tack weld it without any filler rod... which aluminum alloys are good (or not) for it and what setting do you use for tacking? Thanks s lot! ✊

[@pet1srg]

If you pay attention he showed the trick he put a dab on the one side when he held it together he blended that dab in.