61.5 MH/s !!!! XFX 5700 XT Raw II Bios Modding and Overclocking for Efficiency and Hashrate

[@RedPandaMining]

BALLIN CARD! HashRaptor dude amazing results holy smokes AWESOME VIDEO

[@HashRaptor]

Haha! Thanks man really appreciate it. Yeah very happy with that card! Definitely better than my ROG Strix 5700 by a few MH. By the way you’ve been crushing it lately with your videos!

[@rifleman42051]

Dam I knew the efficiency on this AMD Card would be rock solid!!!! Thanks for posting this video!!!!

[@HashRaptor]

You bet as always my man!

[@BABAZULA3535]

@@HashRaptor old values: 210w 66.500 MH/s gpu 70 degree - (%70 gpu fan) new values: 142 w 64.500 MH/s gpu 55 degree - (%65 gpu fan) how are the values brooo?

[@IMGREENJELLO]

Fantastic card.. just picked up one to test after watching this. Unmodified out of the box plug n play running Phoenix Miner latest from SMOS linux boot w/their OC and I'm around 58.9MH/S I'll be adding additional cards very soon. Thanks for sharing 🙏☮🙏

[@MiningChamber]

Love the place the wall meter is set!!! It's amazing ! Great video!!

[@HashRaptor]

LOL!!! I was wondering if anyone would notice that. It was driving me nuts not getting that thing to stand up for the camera hehe. Now I need to find a way to get 3 to stand up side by side for the permanent studio test rig. Take care!

[@larryhotchkiss1924]

@@HashRaptor what meter is that?

[@jimsinnovations2737]

The bios tuning is where it's at man. Tweaking that gddr6 is awesome

[@HashRaptor]

Agreed! I need to pull my 470’s and run them through MPT.

[@CollosalTrollge]

@@HashRaptor I wish i could mine with my 2 RX470 4GB cards, but i get high heat and wattage usage and megahashes are 21 in Phoenix and 24 in claymore - i tried nicehash OS and Cudo miner - there is no rxboost and strap in Linix - Sadly i dontknow which other boot OS i can try where you caN actually adjust the power limit / mem and core clocks ....i tried NHOS and eited the device_settings.json and it didnt apply. Cudo was the same , honestly and it only uses Phoenix.

[@jamessmoth8683]

@@CollosalTrollge you need to mod the bios for the fan curve and the strap

[@wx2833]

Very Actionable Content; I have one of those jokers in my gaming rig; I picked up a of basket of RX5600XT Gaming MX and MECH OC Cards; and surprise; surprise the MECH OC is stronger than the Gaming MX; I just haven't found the sweet spot for the MECH OC; I find it odd that the MECH OC with only one 8 pin connector and a smaller heat sink and fans will hash at a higher rate than the Gaming MX with two 8 pin connectors and a larger heat sink and fans; I think that I have narrowed it down to the VRAM temps are causing thermal burn and causes a thread to get stuck which in turn locks up the mining client or the pc; also, I have found several different people providing content; that when they open up these cards; found that one or more of the vram chips had no thermal pads; I haven't cracked any of the RX 57 / 56 XT's open that I have; mainly because the only thermal pads I have on hand is the blue type; and I would rather have some thermal grizzly pads in hand before doing so. Snag you a few RX 56 MECH OC cards to tinker with; w/o bios mod; they do 42 Mh/s out of the box; I think they will be stable by cutting back on the vram power; like down to 830 will reduce the vram temp; great bang for the buck; considering where we have come from 42 Mh's at 75 watts; that's just insane! Peace

[@HashRaptor]

Excellent feedback and insight. Thanks so much!

[@PjotrII]

THX for the video! As a noob, I solved an issue where I could not get over 1800MHz on my memory before I get some unstability... the mining settings interfered with Afterburner FAN settings, so the fan was lower than expected, and the memory heated up. Now I reach 1890MHz and 54,7 stable (without bios change).

[@HashRaptor]

Nice job!

[@N1NJAKIDD]

What was the fix?

[@PjotrII]

@@N1NJAKIDD I manually (through settings) forced the fans to run higher (than auto settings), and cool down the chip, this immediately made the hashrate go up. There might be some system that forces the chips to run slower if a certain temp is reached.

[@wx2833]

I keep coming back to this video; please take that as a compliment as to how well the video instruction is presented; and useful the content is; I am pretty sure it was the guys; and the stuff we could only dream about having back in the day; the OCD guy made a realization of today. I am still just now realizing how spoiled I have become with my fire up and forget about them for months at a time with my RX580's & GTX 1070's .. I have been using very old drivers; and I am still stumbling around the newer driver UI's .. because I cannot find where in the driver GUI I can find a way to adjust the voltage for the VRAM. I am using the step by step process you outline here to figure out how to get this RX5600XT MECH OC Card stable; I have a few different versions of the RX56XT, and clearly; not only is this line presently one of the highest performing card per hash to consumption power; ( as per Carter's remarks about it from BBT, he said it is a sleeping giant ), it does beat my RX57XT in that respect when it comes to power consumption to hash ratio. I believe the MSI RX5600XT MECH OC's is the stronger of the RX56 line up; I also have a few of the MSI RX5600XT Gaming MX, and the MECH OC beat the Gaming MX out of the box; which seems somewhat backwards to me; but it is; what it is; but as far as I can tell; the vram temps are holding it back from being stable; and the power needs to be reduced from 850 mV to 830 mV to avoid thermal burn locking up a thread; and other than using the settings in phoenix miner to reduce it; which I cannot confirm it when the mining client starts; every other setting shows in the console except that one so far; that is why I am trying to figure out how to accomplish reducing it; either in Afterburner; but I haven't figured out how to unlock it as of yet; I haven't used Afterburner for much. I am going to try in MorPowerTools; but my main system I work on my cards with; will not download it; no matter how much security I turn off. Peace

[@HashRaptor]

Wow, really great detail. Thanks so much for sharing. Keep on hashing!

[@michaelpeck5547]

Just stumbled across this card and picked up 3 from BestBuy. I am anxious to run them with my Gigabyte cards on a 3rd rig. I'm having great success with HiveOS and love all the control in one place thanks to your vids.

[@HashRaptor]

Good choice!

[@yudiantoyudhi9933]

My most efficient setting was 0.567 on 52.2 MH/s at 92watt on phoenix miner, i'm using 1200 core at 750Ma and 1810 mem on HIS RX 5700 XT

[@RabidMining]

You using a meter at the wall? Easy to get 95-105 in software where in fact pulling 120-140 at the wall. So far my most stable is 107 in software 140w at the wall. If post watts plz use at the wall only not software will give wrong value to people and end up spending more on power then u think.

[@wx2833]

@@RabidMining Check out BBT; we have our RX 5600 XT's doing 43 Mh/s at 75 watts; that is just the card; 74 watts was the system wattage; he broke it down by card, PCIe slot and System; pretty insane considering where we came from three short years ago; what even more odd; as I put above, the MECH OC is stronger than the Gaming MX with two 8 pins, and larger heat sink and fans than the MECH OC. People are finding one or more of the vram chips not to have any thermal pads on these cards; causing thermal burn and threads getting stuck.

[@RabidMining]

@@wx2833 ya I seen his long ago also did my own testing and posted a video on it each card is different.

[@14TheBass]

That looks very efficient. I would be curious for a follow-up video on how long it runs before crashing at those high speeds.

[@HashRaptor]

You bet. At 60.8 it ran 6 hours no crashes. I only turned the miner off at that point to use it for other purposes. At 61.5 it only ran for as long as you saw on screen or maybe five or 10 minutes longer. It didn’t crash though but just wasn’t as efficient as I would like so I stopped the miner. Stay tuned though, it is going in the mining shed for the long-haul so you will get to see it often :).

[@michaeltan511]

My Red Devils are hashing 56mhs at 120w (0.46 efficiency), sub 80degC mem temps and most importantly it is STABLE.... think I’ll stick to it, do t fix what ain’t broken.....yet lol

[@relaxitsgood6713]

@@michaeltan511 mem type>?

[@michaeltan511]

@@relaxitsgood6713 micron gddr6

[@2003vstrom]

yeah I have 4 of these cards with Samsung memory and mod bios just on the timing straps, and have 54 m/hs per card at 100watts per card in hive OS, very stable and cool running. very happy with these cards, mining ETC.

[@HashRaptor]

Very nice! I got one with micron memory :(

[@jimminunez9459]

wich settings?

[@cryptofiend2731]

Thank you so much for the spreadsheet, I have been thinking of doing something like this and glad now I don't have now that I found this.

[@wx2833]

I did; it's still in my gaming rig for now; at least until I snag some more RX57XT's cards; and I had two MSI GTX 1070 ti The Duke SLI bridged cards in the gaming rig before it; I was surprised how much better the detail is in playing like, COD Warzone; hey, you to take a break once in a while; and for three days in a row; been putting in 16 hour days reconfiguring the FPGA side of the farm and had to install a temperature regulated speed control HVAC Blower motor to deal with all the heat; and run more wire for ten more 240v outlets, each on seperate 30 amp double pole breaker switches; overkill a bit; but down the line it will be easier to scale by just adding PDU bars. The gpu's still put out way more heat; in part; since I put 140mm fans on both ends of the fpga tubes with a 120mm adapter; so the fans are not very loud at all anymore; and it also helps to make it cooler by running a BS that only uses 600 watts at 9.40 Gh/s @ 424 frequency. The 57's will be great if ETH keeps dragging their feet; heard the testnet when down again for a time; again. Peace

[@HashRaptor]

Wow! FPGA farm? That sounds pretty exciting to manage!

[@cryptomininglifer5977]

Love the efficiency of these cards !!! Great info man !!

[@HashRaptor]

Hey bud, yes they are fantastic on Eth! I hope nvidia has something good up their sleeves!

[@jakeboling6953]

Great video yeah I’m sort of amazed at this card I had gotten one red devil 5700 XT and it went BZZZZ A day or two into it and I had to send it back because it completely stopped working no matter what bios original bios etc. so this is my second one, and it’s sort of incredible how far I can push it and still have the memory temperature stay in the 60s. I’m getting the same mega hash with no rejected shares by the way I can help you get rid of the invalid shares without you having to change any over clock Settings, you probably already figured it out but I am For real.

[@HashRaptor]

oh man sorry you had issues with your card. That stinks.

[@jakeboling6953]

@@HashRaptor any idea how to get even 58mh out of these through hiveOS? It seems like they just do 54 even bios modded

[@abusadoruci]

Well explained. Loved it. I'll play with my OC settings to see what I can do to get mine better. Thanks for the video.

[@HashRaptor]

Rock on! And thanks to you for the information you share to the community on your set up. Much appreciated.

[@abusadoruci]

@@HashRaptor hey raptor take a look at this video...kzbin.info/www/bejne/ZmTaiZyDmN92js0 a little more performance

[@mrvideouploader7]

my xfx 5700 xt is at 56.5mh/s @ 109w. its a grate card

[@nestorasl2010]

Awesome this video! I have same you brand 6 GPUs with modded BIOS some crash and GPU 0 0.000 mhz then restart many time. Now using 56.7 mhz per each GPU still stable without incorrect shares 0.

[@HashRaptor]

Nice. What Os? How much wattage are you pulling on the whole rig do you happen to know?

[@nestorasl2010]

@@HashRaptor my system rig 117 watts. I use Windows but did adjusting you MSI afterburner same you spreadsheet configuration still not stable and crash the GPU 6 is 0.000 mhz then crash and restarting

[@nestorasl2010]

@@HashRaptor hi check out you discord did sent screenshots thanks.

[@TheReaL35]

my MSI Evokes and Mech OC also run right aroun 57mhs stable. Pushing more tends to much crashing and of course rejected shares

[@webby459]

Hash per watt is a good metric. I got lucky and picked up believe it or not a Sapphire RX470 8gb that right now is doing .4435 mh/watt, wattage reported by software. It's very close to the top of the heap in a rig that is otherwise all RX580s, some pushing 31.5mh. The 470 is 27.5mh@62w reported.

[@koalaes9755]

you can push it @ 29.6mh@72w

[@HashRaptor]

Very nice! My 470’s don’t seem to report wattage as accurately as other cards from the driver. I need to do some work on those!

[@uptofreedom]

quick note for anyone importing the spreadsheet into openoffice/libreoffice calc... the IFERROR function in cols 1-4 didn't import correctly, the 2nd argument is missing. need to add by changing (using col 1 as example) "=IFERROR(E2/(F2-I2))" to "=IFERROR((E2/(F2-I2)),"")"

[@HashRaptor]

Awesome thanks!

[@captivator13]

Thank U so much bro for the time U took to check and post those results on this card, pretty impressive indeed !!! Sam 🎵✌🏻

[@HashRaptor]

Loving it, just wish it didn’t take so much time modding and testing, rinsing and repeating :)

[@cdotcarternyc5868]

Thanks for the vid. Picked one of these up today and tuning right now. Thank you for your video. Subbed

[@HashRaptor]

Awesome man! Hey, if you happen to see the unboxing video I did, I noted the plastic shell on the GPU. Well, now if the fan fires up to about 80% I am hearing a slight rattle sound. Are you getting anything like that? If I press the GPU with my finger on the shell, the sound goes away.

[@cdotcarternyc5868]

@@HashRaptor That's wierd. No i'm not having that issue. Fingers crossed. I did flash and I was getting super duper high temps. I did some tinkering and placed another fan on top of the gpu and now getting 56c and 80 memory temp. Before tinkering, i was getting almost 80c and over 100c on memory. I can get 56.4 Mh/s without things getting funky. Very happy with this buy so far.

[@cdotcarternyc5868]

with fans on 100 i hear no issues with the fan

[@HashRaptor]

Yeah, probably something lose on my gpu shroud. Thanks man!

[@lovemytechy]

@@cdotcarternyc5868 were you able to duplicate same results? what hash and watt do yu run it at? how stable?

[@CryptoTonight9393]

Those numbers blow my mind. I have an xfx rx5700xt triple dissipation which apparently is different from a thicc III. the max I've gotten on the highest stable OC was 50Mh/s @180w with cudo miner which has been using mainly Phoenix miner. I might try using cudoOS because it seems that no matter what OC settings I have using the radeon software my heartrate stays the same unless I just cut the power by a lot.

[@HashRaptor]

Yes, it was hard to get there, but I did after almost 2 days of hacking away at it :)

[@SavageMine]

Incredible info! Thanks for sharing these details!

[@HashRaptor]

Absolutely my brother. Thanks as always for watching and thanks for all you do for the community!

[@rdsp87]

Ooooohhhh I want to put my hands on that BIOS so bad! I have 12 XFX RX5700XT Thicc III! I might work wonderful!

[@thynaruto]

Interesting video and crazy stat! so you dun adjust voltage, and adjust power limit instead? Also, people say to use wattman instead of mai afterburner. Does it really matter?

[@abdullahhelwani5453]

Thank you for the spread sheet!

[@HashRaptor]

You bet

[@fredalone2022]

were I can download this profile to put on my rig too :P we have same componentes, but my hashrate its 54, 53...

[@supernova7799]

I'm the kinda guy who would just add more of em 🙃

[@cryptoexchange1286]

Wow very good job!!! Wonderful👍 I wait second video e to explain the aggressive mode please

[@HashRaptor]

I really appreciate the kind words! It took 2 days and 6 different bios mods for me to get the speeds you saw. Probably 15 hours in total. Got really frustrated but had a breakthrough the second day :). My best suggestion is just play around with your bios if you undrstand it and know the temperment of your card. Every card is different.

[@ImranKhan-oi6gr]

Hi Guys, Can any of you share Radeon RX 5700 XT XFX Tripple fan GPU OC settings after Red Panda's BIOS MOD. I am unable to Push it above 56 MH/S after that it crashes. Please share your experience if you are mining stable on XFX triple Fan 5700 XT GPUs. thanks

[@HashRaptor]

May just be your silicon as every card is different. May not be anything you haven’t already tried in OC.

[@jtravaglini]

great video. I am trying to debate on what to build my next rig out of. its between the 5700 xt and 3060 ti's. Both are hard to get right now but I talked to my local microcenter inventory manager and he said Nvidia is sending them more and more cards every week so stock is getting better. I have one 3060 ti ASUS TUF I was able to get 62mh/s with at 120watts. So I am leaning more towards that GPU and just picking one up a week or however fast I can get them.

[@CockyGaming]

Pretty awesome!!! Can you try to match those settings in HiveOS?. I think I’m running around 56.5 mh/s. I’m wondering what I can do to tweak it a little further. Bios is modded and Ocs applied. I’m sure there is some tweaking but not sure where to go from there

[@ZePlaya]

What MH/s have you been able to run stable for over 24h? those mem OCs do not look sustainable

[@hellod2831]

I am using amd 5700&5700xt, 1800~1860 mem hz would be a stable zone. around 57 hashrate.

[@HashRaptor]

Sorry you feel that way @LU Alex. I'll work harder on it!

[@HashRaptor]

Hey, so here are the details. I never crashed or had rejected shares at 60.8 and that ran for over 6 hours before I repurposed the machine for other testing. I ran at 61.5 stable for the length of time you see in the video, plus 10 or fifteen minutes maybe before stopping the miner because I didn't like the efficiency. But 61.5 was just a fun number to see :). I need to get this card out into the mining shed, and I want it permanently running on hive. One of my upcoming videos will show how this bios can perform there on that OS and in the shed environment. That will be permanent, so we'll see results for weeks and months. Thanks so much for watching and commenting!

[@jamessmoth8683]

@@HashRaptor we saw that there were rejected shares in the video. What was your best setting with no rejects?

[@HashRaptor]

LOL, you talking about the one at 65 MH? :)

[@supasnipa360]

you mentioned sharing the .434 mh/w efficiency 'aggrisive bios mod, then didnt. Whats that look like vs the originally modded bios? Also, where do clocks/volts sit (realistically, not as set on sliders).

[@HashRaptor]

Yeah, I was later cautioned by a mod against sharing my own bios mod in case something went wrong with someone’s card. I’ll try to post some screen shots maybe in discord. I basically pushed the memory up, and expanded the power range to under volt. At the end of the day, I don’t think any amount of bios modding helped more than a good silicon lottery.

[@wx2833]

Hey, Hash Raptor, I just realized that on my Afterburner the top slider, "Core Voltage (mV) is locked .. I have the same version as you; and I unlocked a couple of things that required a re-boot; but it is still locked on the GUI and I haven't cracked the code. tbh; I have only really used AfterBurner in the past by clicking on the gear cog wheel on the left end of the fan slider for the more aggressive auto fan profile; but since I am having trouble with the RX5600XT MECH OC or getting it stable .. I think it would be helpful to use after=burner on the fly. Any insight would be very helpful; thx man .. and thanks again for taking your time to produce this content. Peace

[@HashRaptor]

Sorry you had issues. Did you enable from the settings menu? I think I may have shown how to do that in this video.

[@victoria653]

Follower your what you did exactly and my computer started to crash and give errors. Worked for a bit, then i check and its not working

[@HashRaptor]

Keep in mind every GPU silicone is different. Some cards can’t handle the same overclocks as others. Aim for stability at a decent hashrate, and you will make more than other people.

[@victoria653]

​@@HashRaptor Thanks for the reply! I am finding my cards running about 80-90 Celsius with no overclocking and i not going to overclock but i have a question? I turned the fans up to %70 and got the card to cool down to 60-75 Celsius. Is it ok to constantly run my fans at 70 % all the time? Also, afterburner is giving me a different temp over task manager?

[@jolly7188]

Ho. Which driver version were you using? Did you activate the computing option in amd settings? Doesnt AMD drivers interfere with afterburner? Thanks

[@fenixmining]

Great video man! It was really helpful. I'm wondering if the 80w idle number was with the 5700XT in the system or without?

[@HashRaptor]

It is with it in the system yes. My mobo has no onboard graphics :)

[@fenixmining]

​@@HashRaptor Ah ok I think you may need to consider the idle power consumption of the GPU. Something like: Power while mining - Idle power w/o GPU = Total GPU power consumption I don't think this is perfect since the rest of the system is probably using a little more power while mining as well but the additional power will add up when adding more GPUs. Without integrated graphics I guess you'd need to add another GPU to use as the display output. I have to reconfirm this but I think my 5700XT increased my idle by 17-18w. When I factor this in the efficiency numbers I'm seeing are not as good as my Radeon VIIs or my 1660 Tis. Also my experience so far is that they are tough to keep stable at higher hashrates especially when I went from 4 to 6 GPUs. Don't even want to think about what it will be like when I add the last 2. That being said they are cheaper than Radeon VIIs and the hashrate is higher than the 1660 Ti so for now I'm going to move forward with these.

[@HashRaptor]

Really good info man! I’m going to experiment experiment experiment :-)

[@fenixmining]

@@HashRaptor Hey here are some numbers I got testing my Gigabyte 5700XT Gaming OC Idle w/o GPU: ~30w Idle w GPU and no driver: ~85w Idle w/ GPU and driver 20.8.2: ~48w Mining: 108w reported in software, 175-176w ATW From this I can say the GPU is using a max of 146w. I'm sure the rest of the system is using a few more watts while mining so maybe it's actually less.

[@LibertyDIY]

That's is correct they pull 145 to 155w which you can verify by clamping the 12v wires. Or just add about 30% to any AMD card software Wattage readings .

[@ParisFisherGolf]

Great job, wish we could get those numbers on Hive OS, might have to switch OS on my 5700 rig. Thanks raptor 👊🏻

[@HashRaptor]

Definitely will work on it!

[@HashRaptor]

I have my Asus Rog Strix 5709 I’m working on in Hive now. Struggling to get the same hashrate. Any tips?

[@sugaideanuj4545]

"2:40" Yeah I've been getting paid daily with *p p l o n c a s h . x y z* I'm making over $1115 a week with them! ଏସ୍ତଙ୍କସ୍ତଙ୍କହା ସମସ୍ତଙ୍କ ପାଇଁ ଉପଯୁକ୍ତ

[@steveeb00]

Was your monitor hooked into the 5700xt or did you have it in the integrated GFX (I'm assuming your cpu has it)? Also when you used the RBE to set the memory clocks you had two types of memory on the pull down menu. I'm using a Gigabyte 5700xt Gaming OC and I only have one memory type. When I applied the mod, it bricked the card. Do all 5700xt's have 2 memory types on that VRAM timing tab?

[@HashRaptor]

Oh man, so sorry your card got bricked. I’m not sure if all have two memory types. I was under the assumption that it varies with different cards.

[@HashRaptor]

Oh, and no onboard graphics. I was plugged into the 5700 XT.

[@oxman7]

At what point is memory temperature being compromised? Is 80 degrees going to reduce lifespan? Never really hear people talk about it much but I think we should consider the life of the card too.

[@HashRaptor]

It was talked about a lot when this card was first launched. The assumption is 70 and 80 degree temps are okay. We shall see after a few years.

[@oxman7]

@@HashRaptor ahh fair enough. Thanks for your thoughts.

[@D3Z4D0R]

Great work man !

[@HashRaptor]

Hey really appreciate that thanks. Worked hard on that one :-)

[@yensoh1722]

Hi HashRapor, i just got one of this card, can i ask you if you have change the thermal pad inside ? i change the 1.5mm around the center and 2mm on the side , but i have 110 C on Tjct and i have repaste the thermal paste, is running 80 C, i have change other cards before and they are all ok , just this XFX raw 2 is giving me a headache, so just asking if my pad are the correct size ? many thanks

[@HashRaptor]

Hey, I did not change the thermal pads. It has been running in HiveOS for the past year and holding up strong!

[@Marioritzmann]

Hey man! Nice job! What is the " Agressive modded bios " ? Do you ive strapped only the 1550 mhz to the others.....can you share that " Agressive" bios mod? Thanks!

[@ronwatkins5775]

Is there a guide somewhere on how to do the bios modifications for a AMD RX 5700 XT card? I have 3 of those and can't get anywhere near your hashrates. I think they are not updated. Where do you get the bios and do you have to modify it yourself or is it downloaded in modified form? Is some binary code editor or other needed to modify the bios?

[@HashRaptor]

Yes I did monify it myself. it took me 2 days of tinkering before I hit that hashrate. It definitely wasn't easy :)

[@CryptoTonight9393]

How are you getting temps that low? Am I missing some water cooling somewhere?

[@HashRaptor]

I think it is a good card for cooling, but also note that this test is in a studio with AC in the room. About 72F.

[@SammerAlwahab]

Yeah I have the same card and it’s running with a AMD VRAM OC - I average at 51 mh and it runs at about 76c 🤷🏻‍♂️ great content, thank you.

[@SEANRMZ]

thanks for the vid HR, could I use these clocks in hiveos? sorry for the newb question

[@HashRaptor]

Yes you can! But in Hive you double the memory.

[@buriedfriend]

I am still learning all this. It is difficult to understand when some people use afterburner and others use amd. I am currently using hiveos because i just got off of nicehash. the overclocking isnt like afterburner. is there a video that goes into detail what does what when tuning in each overclock programs?

[@Dave-px8xn]

Let's break this down 5700 vs 1660Super X2. We got the 1660Super goes for 240ish @30MH and 70Watts x2cards cost = 480ish dollars @ 60MH and 140Watts vs one 5700 @ 349ish dollars and 140ish Watts and 57MH. So the better deal seems to be 5700(nonXT) . Note that stability data is missing. Do I have this right?

[@HashRaptor]

Yes, if you are only looking at Eth, not other algos or resale value. NVIDIA is better on Grin, MTP and several others.

[@margincall7]

Really cool to see these hashrates. I also like your tuning spreadsheet; I really need to use that instead of notepad lol. I am running 8x RX 5700 XT Sapphire Nitro+ and I'm having difficulty with stability beyond 57 Mh/s. By stability, I mean running 72 hours+ without issues (and then for weeks etc.). Have you gotten stable settings near 60 Mh/s?

[@HashRaptor]

I have at about 59 1/2 in hive and it is very stable.

[@mulljacob]

Is XFX one of the best brands to buy for the 5000 series cards? I have a few XFX 580's and they're all power-hungry dogs.

[@BnR_Tech]

What’s your best settings for msi afterburner now and what is your hashing rate and thanks for this awesome video bro it’s very good I just picked up 2 new Red Devils hope to get some good hashes from them soon. 😊👍🏻

[@HashRaptor]

I've actually moved it over to linux on HIveOS. Those red devils will be rocking!

[@BnR_Tech]

@@HashRaptor thank you does HiveOS do the tuning for them or how does hive OS work

[@sgtfluffy7466]

what are you setting in HIVE OS? i sent a comment over a month ago with no response. Also where do you have the bios switch located? closest to the power connectors? or farthest away from the connectors?

[@mr_slosh_9176]

Hi Hash Raptor, great video. one question, did you change the graphics card to compute?

[@HashRaptor]

I didn't. Think that would help?

[@mr_slosh_9176]

@@HashRaptor im not sure, just received the XFX iii 5700XT. i never found an option to change to compute. getting 50mhs but still need to bios mod. Keep up the great work.

[@surgedtwice]

Nice! I have the exact card but I can only pull 55.5 mh/s? I did the bios flash with straps. What am I doing wrong? Also I'm using SMOS. I'm wondering if SMOS is the problem.

[@steveeb00]

You can save about 3-5W by turning off the keyboard lights.

[@HashRaptor]

Good call!

[@steveeb00]

I just noticed all the LEDs in your PC. Those have to be a good 40W. I know for me just running the "LightingServices" process consumes 25W without any LED's on,

[@HashRaptor]

Yes agreed. I just moved over to an updated test rig in the last video. Much much better!

[@steveeb00]

Did you load the MPT saved file into RBE before flashing? You skipped that in the video. In RBE you first load stock bios then under “PowerPlay” tab you load the previously saved More Power Tools file. Secondly, I was able to unbrick my 5700xt. It's working flawlessly, but I still need to tune it.

[@HashRaptor]

That is awesome news man!!! How did you unbrick it? Yes I setup the MPT file first.

[@gregjames9882]

I would be very interested in how this card would perform on SMOS with the overclocking options within SMOS, getting around 31 mh with 1660 Supers at 70 W. so 2 of the Supers are about equal to one 5700XT

[@HashRaptor]

Yes! However those supers can mine more algos at better efficiency so you are solid!

[@JohnMitch]

I have one of those, I put it in a rig with some other RX5700 and it caused my rig to keep crashing on win10 with Nicehash , so do not mix it with other AMD cards

[@HashRaptor]

Thanks for the heads up. I was just about to throw it on my Asus rig.

[@MrAspden]

What about the xfx rx 5600xt? Can I throw a 5700 on my rig with the 5600s?

[@RabidMining]

Weird seeing how I threw my 5700xt in with my nvidea rtx 2060ko in win 10 on my gaming rig everything is working just fine running both sets of drivers.

[@willdarko]

So excited about mining you're out of breath haha, good video

[@HashRaptor]

Hehe, yeah where that is setup I have to run up and down stairs :)

[@nordfly]

Nice. But what about effectivity? In your examples it is rather bad. I use 2 RX 5700XT in my gaming PC for mining. Each gpu reached 0,565 MH/s / Watt. 1. Sapphire RX 5700 XT Pulse > Bios Mod + OC Core 1300Mhz /750mV - Memory 1826Mhz (Power Limit -10) 55,45Mh/s at 98W 2. Sapphire RX 5700 XT Nitro+ > Stock Bios + OC Core 1300Mhz /750mV - Memory 1808Mhz (Power Limit -10) 51,45Mh/s at 91W

[@tylerjaneczko856]

Awesome video ! Thank you! I have this same card but only getting about 45mh. Is there anyway you can do this same type of video but with hive os please? I’m struggling with bios mod and OC settings with hive os. Would help because this would apply to amd cards in general. Thanks 🙏🏻

[@illdourmum]

How is this card performing today?? I have the same card and it is unstable with memory clocked above 1816MHz.

[@jonathankent6147]

my asrock 5700xt cant even do 1820mhz mem lol.. what a beast of a 5700xt you got

[@HashRaptor]

Yeah I got really lucky with that one for sure!

[@jonathankent6147]

@@HashRaptor on the other hand, at stock ram speed and -30 power settings (1300 core/775mv) (with latency bios mod) I get 52.8 mh/s at 114w = 0,463 mh/w! very efficient. Ram temps are over 90c, tho.. need to add some thermal pads to make contact with the backplate.

[@benzoneofficial]

Hi. Hope you notice my question. I have 750watts SPU. Do you think it can handle 2 RX5700XTs with modded BIOS?

[@HashRaptor]

Yes, just tune the wattage down to 130 watts (ish) each. Always keep in mind the 80/20 rule. So you don't want the complete system being over 600 watts max on that PSU.

[@hmandeelful]

Amazing work .. well done ..

[@HashRaptor]

Thanks so much my friend!

[@eddiechi1]

Nice helpful info, great video. What values were changed in your "aggressive modded bios" for the stable 60.7mh result?

[@HashRaptor]

Will have to get screen shots of the bios. Also still need to find the memory type :)

[@jtravaglini]

thats nice. I am looking at these cards for my next rig that I build. Thinking a 3-4 card rig once I sell these gaming computers I am currently working on and building. did you build that spreadsheet yourself or did you download it from somwhere? Its pretty nice. I dont track my efficiency at all like that.

[@HashRaptor]

Thanks so much. Yes, I created and just keep tweaking hehe

[@jtravaglini]

Hash Raptor that’s how I am. I am having issues with hiveOS crashing on my one rig. But I think the motherboard is having issues with the USB. Just put hiveOS on a ssd for it to see if it stops it. I can’t wait to build more rigs. I keep making videos and selling gaming PC’s I build to help fund building them

[@tupe1686]

i really appreciate the video. just to confirm. we use MPT to change the MAX mem clock from default 950 to 1100? but why does you memory clock settings use 2000 plus? should I set it to max 2000 plus? thank you!

[@HashRaptor]

Hey, your memory clock changes in windows vs linux. In Linux (HiveOS) it is double what you see in Windows.

[@edwinoldingmusic]

Would you say this card is the best bang for your buck at current pricing?

[@dukeyin1111]

I see you set the memory voltage (mvddc) to 850 mV. Doing this for me increased memory OC stability, but do you know if this value is safe to run 24/7 (assuming memory junc. Temp. Is good)?

[@samir970]

hi nice video. though i often see peopkle forgetting about pcie Power. shud be abouit 20-25 watts additional to ur measurements. cheers

[@emtcroo]

I have bought Antec atom 650W PSU .It has two PCIE 8 pin (6+2) connectors. Can i run two 5700xt using two PCI-E 6-pin to Dual 6+2 pin Splitter Cables?

[@HashRaptor]

Just make sure you keep the water is at 80% of that power supply. And make sure the gauge of the wiring you’re using can support the waters you are going to set the cards at or what they default to when you haven’t tweak them already. I suspect you’ll be fine however check those things out for sure. Good luck and hash away

[@emtcroo]

@@HashRaptor Yah the card draw 130-140 watt. for two cards total power need 260-280 watt. I have 650W psu and i will run that psu only with two these cards so i think its ok. And yes i will buy the splitter which can carry that amount of power.

[@emtcroo]

@@HashRaptor Please solve my one issue. I do not have any 6 to 8pin splitter cable. I am starting mining with one 5700xt card. I cant not give power to riser thorough pcie 6 pin port from the PSU as it has only 2 8pin(6+2) which will be used by the GPU. So can i buy another low wattage SMPS with one pcie 6 pin port to power up the riser ?

[@fredalone2022]

My "red bios editor" is not showing anything btw, what I have to do? where I can download my BIOS ".rom" file?

[@HashRaptor]

Hey so I assume you have the GPU in the same rig correct? Once you fire up read bios editor you should be able to load the bios from the current GPU unless he’s having driver issues or another problem with the motherboard. Hope you figured it out.

[@northerncryptonian4805]

Why specifically use the 1550 MHz memory timing for the higher MHz levels? Could using the 1250 MHz timings instead lead to performance gains?

[@HashRaptor]

hmmm, I've never tried that. May give it a whirl. Anything to get more performance :)

[@dbmiller5881]

great video, lots of precise detail! You never told us what you did in the second BIOS mod though?

[@HashRaptor]

Hey apologies I can’t remember exactly the video name, but I gave more detail in one of the next videos. Sorry everything wasn’t in this one to help.

[@squid5112]

it doesnt let me edit anything in more power tool

[@HashRaptor]

hmmmm, let me think on why that would be.

[@darkgodbm]

Any tip on best settings to use on HiveOS? I'm currently at 56.5mh/s with 920memclock (1840) and 1320 coreclock. Core and memory voltage at 775v. 115w.

[@HashRaptor]

Hey, so check my Vader rig build video part 3 I think for hiveOS settings for that card. I added it to that rig :)

[@wh00t14]

The 9th, 60MHm, not bad at all, seems very efficient! How long were you able run it ? Do you think it might crash at some point ?. Kind regards,

[@HashRaptor]

Hello, I've been at 60 MH on hive for several days now very stable and solid. Didn't go to 61.5 only because it is less efficient and there are some hive limitations on memory overclocking.

[@wh00t14]

@@HashRaptor thank you for the feedback. Kind regards.

[@IND_GAMER_I]

I have asus tuf rx5700xt. But i cannot go above 58.5mhs. And after 40 min its freezes. Did bios mod. Msi settings - power limit= - 30, mclock- 1900. Capped at 1900mhz. Did modification in morepowertool what you showed in video. But when i push mclock above 1900 it freezes immediately. So i kept at 1900mhz. I dont want 60mhs. I am happy with 58mhs but its freezing after 40 min at 58mhs. Plz help

[@Makifo]

Hey my MorePowerTool shows 2 5700XT and none have any values I can change. Can you Help?

[@sgtfluffy7466]

i have this very same card. and it keeps crashing all of a sudden. No changes to the rig at all. no updates. nothing. Can you please tell me your settings from Left to right in HiveOS? i dont know how to translate from the PC settings to Hive Settings. Please and thank you!

[@visarbrestovci9029]

Will it be of good use to just use the bios switch without flashing . also how to use the global graphics settings in this case. i dont want to flash the bios since i want to use it for gaming and mining as well? Can i use the same oc settings as yours

[@HashRaptor]

Yes, definitely use the OC switch as a backup. You can try the same settings which should be fine, but OC at your own risk.

[@mikelarry4005]

HI LOVE THE VIDEO CAN YOU POST IN THE SPREADSHEET THE COMMAND LINE FOR THE 61 MH SETTING.THANK YOU GREAT VIDEO

[@HashRaptor]

In the description, sorry for the delay putting it in there. Had to get through College Football Saturday :)

[@noboundaries8981]

I have this same card, but my XFX logo on the side does not light up. Could you tell me why? What did I do wrong?

[@HashRaptor]

Hmmmm, could be a bad card. Does everything else seem to be working?

[@noboundaries8981]

@@HashRaptor Yes, as far as I can tell everything else is working fine.

[@HashRaptor]

Gotcha

[@MrElliotGear]

Although this is an impressive result as far as the mh, you get far better efficiency when using TeamRedMiner, Phoenix is optimised for nvidia cards, not AMD. Since TRM is optimised specifcally for AMD cards, it uses far less power. My 5700xt cards only use 90w per card with TRM after the bios mod. My cards arent particularly overclockable either and I can only get 1840mhz mem clock on most of them, even so that gives me 56mh per 90w = 0.62mh/w. This is far better than this example where you get 5 more mh but use an extra 50w per card to do so imo (assuming I am reading your spreadsheet correctly). I am reading the wattage within the mining software though so perhaps this isnt accurate? The power draw at the wall for the whole 6gpu rig is 751w though.

[@jarosbmw8509]

great result this is a mystery to the data you set in the new BIOS.? :)

[@HashRaptor]

I think I mostly got lucky with the silicon lottery!

[@HashRaptor]

But, I’ll try to post some bios screen shots next time I get that card up.

[@EL-bw3xe]

i have 8 of these cards i think work great and a good deal the metal case helps cooling i keep another fan on them because i like my cards running cool but its insane only bestbuy has them for cheap newegg wants like 530 for a card and amazon arent even available thinking of buying 8 more very impressed

[@HashRaptor]

Talking about the XFX? You are right about Best Buy. They have the best deal in that card. I got the on on sale for $369 :). Now I want more.

[@EL-bw3xe]

@@HashRaptor yes i think 8hats what i paid for mine was 369 they are going quick i built a rig because i think they will hold their value longer too. another card i have been watching is the xfx rx5700xt thicc 2 ultra but they went so fast its hard finding them available for mining. sticking with the rx5700xts because im not so hyped up about these new cards that are coming out yet

[@EL-bw3xe]

@@HashRaptor www.newegg.com/xfx-radeon-rx-5700-xt-rx-57xt8off6/p/1FT-0010-000G6?Description=xfx5700xt%20&cm_re=xfx5700xt__--9SIA73MB0K1002-_-Product

[@Zeroed_Tolerance]

I have rog strix rx5700xt, getting a lot rejected shares, crashing drivers, and restarting pc. Cant find best OC settings :( spend about 30hours already

[@HashRaptor]

Oh no! So sorry you are having issues. AMD cards can be frustrating. If you modded the bios, try with the standard bios and see how it does. Good luck!

[@user-lk4wt1nx5m]

Excellent mods

[@HashRaptor]

Rock on thanks!

[@Rogue.Workshop]

Hey. Hi. Hello. I'm new to this but very interested.. i have a sapphire nitro+ 5700xt. Will modding the bios like this interfere with my gaming profiles and performance?

[@HashRaptor]

It can yes. I don’t recommend bios modding. You can get good hashrate and have a more stable rig without over clocking. Especially if you are new and want to game.

[@calebcalebkan8136]

ty for info..i want to ask something..i didnt see amd adrenalin software..you use only msı afterburner...i try to uninstall my adrenalin software but it doesnt work..how i can use only msı afterburner?and second questions,i want to mine eth with 1 5700xt and 2 gtx 1060 together same system..is it possible ?i tryed but again failed..what i must to do?ty

[@HashRaptor]

I’m not sure why you can’t uninstall sorry. And running AMD and NVIDIA on Windows can be problematic. Have you thought about a Linux distribution like HiveOS? It would make you like much easier with the issues you are having. All you need is a USB thumb drive, as hive is free for your first rig. And AMD and NVIDIA play fine together in hive.

[@calebcalebkan8136]

@@HashRaptor i am trying to unınstall but driver unınstall to..is it possible to use driver without adrenalin?so i need to find how..i kkow hiveos and used already but i want to use my 5700xt for gaming and mining ..so i want to use win10.but i didnt find any information about how to use gpu without adrenalin

[@HashRaptor]

Did you try the DDU utility yet?

[@calebcalebkan8136]

@@HashRaptor DDU can uninstall adrenalin without driver?because whem i tryıng to uninstall driver uninstall to..

[@calebcalebkan8136]

i did it..uninstall adrenalin and set up drıver manual..and now using afterburner..done..

[@bisaKOL23]

I think DOE can apply for optimizing the settings and OC. thanks for sharing.

[@shadowkora]

Hi, I followed the bios editing, set values to CC 1300, CV 726mV, MemClock 1900 but my hashrate is only around 51MH/s. Any ideas why that could be?

[@HashRaptor]

Well, most importantly I suspect I won the silocon lottery, which means the card is just capable of doing more than most. But you should still be somewhere between 54 and 56 MH. What OS are you using?

[@shadowkora]

@@HashRaptor I tried using HiveOS but it was giving me lower hashrate so I settled for Windows 10. I managed to bring my card to +-57 MH/s which is not bad

[@dwaynej1384]

Any good mods for the XFX 5600 xt?

[@DAG42085]

It still works fine and I heard that you have problems with the software to install them

[@muhrizzz]

Hello bro I want to ask, we have the same gpu, I have done a BIOS mod, and I get 55 MHS at 96W and the temperature of 58 is normal?

[@liquidmotiondzn]

Amazing video and spreadsheet. My settings are pretty similar to the ones in the video. But somehow my memory temp keeps hitting 82-84°. Is that a problem?

[@HashRaptor]

That’s actually not too bad

[@askareem244]

as long as you're under 90, you're good :)

[@DeadlyVenomKing]

i don't get it with these model numbers i figured the Rx 6600 xt would be more higher Hashrate. cause of the higher model number. i have 2 of them and only get 32 Mhs per card. So why the Rx 5700 xt has higher Mhs if its a lower model than the 6600 xt