62 Ikea PARASOLL Door/window sensor connect to an LED bulb and direct binding in Home Assistant

HU felirat & EN subtitle!
📺 The Ikea PARASOLL Door/window sensor is a new product of IKEA's smart home system, which was introduced in 2023. In this video I integrate it with Zigbee Home Automation in Home Assistant.
👉 It can be directly paired with any Zigbee Light device, i.e. it does not require the Ikea DIRIGERA hub and the IKEA Home smart app, nor any other Zigbee coordinator!
🔗 Ikea PARASOLL Door/window sensor description
www.ikea.com/u...
🔗 Ikea PARASOLL Door/window sensor user manual
www.ikea.com/h...
📘 Ikea PARASOLL Door/window sensor user manual
Getting started without hub
1. Make sure the smart product you want to connect is installed and powered on.
2. Hold the door/window sensor close to the smart product (less than 5 cm away).
3. Press and hold the Pairing button for at least 10 seconds. A red LED will steadily shine under the lens of the motion sensor. The smart product will pulse with a LED once connected.
Good to know
Without DIRIGERA hub or controllers, you can connect a maximum of 10 smart products to one motion sensor.
Buttons on the device:
1. Pairing button
Factory reset
To reset and remove all connected products, quick-press the Pairing button 4 times (within 5 seconds). Follow steps 1-3 to reconnect your smart products.
💻 The system used for the demonstration:
Synology DS718+, Intel Celeron J3455, 2048 MB, DSM 7.1.1
Docker 20.10.3-1308
Home Assistant SkyConnect Zigbee (EZSP) 7.3.2.0 build 212
Home Assistant Container 2024.2.3 (user interface 20240207.1)