69 Mustang gets LED Taillights

[@herbiederby3394]

David is going to be all smiles.....nice work as always lucky.....💯👍✌

[@brocasable]

Hope lucky is doing okay, his close up, look really tired. I hope everything is okay, you are a great guy and I am very great full for everything you have done. Thank you for all the videos you have done.

[@davidsandberg7631]

He has to pay for the shop so he works all the time....,

[@mwilliamshs]

The "watch this video next" card thing at the end of the video (last 30 seconds or so) perfectly covered the left taillight as you demonstrated it. No bueno

[@guns2317]

Looking great so far! Those LEDs are a huge improvement. Nice work.

[@Squirrelitis]

6:46 "ALLVINNN!!"

[@stoneshrink]

lol

[@krashdown102]

if you change the speed you can almost understand what he is saying haha

[@TheSaxon25]

Nice! I always want to get into LED taillights for the cool programmable stuff you can do with them but I can't get over seeing the individual LEDs showing through the lens. I love the fully diffused look of an old school bulb. 🍻🍻

[@Buldg87]

This is why I usually end up doing LED replacement bulbs, but then 90% of the time you lose the option to do all that cool programmable stuff. I do know that United Pacific makes a tail light controller that lets you do sequential patterns as long as you have three bulbs on either side. That way if you wanted you could do LED bulbs, keep the diffused look, and still get some cooler looking patterns. Their part number is 90656

[@willpidgeone6325]

I agree with you 100% on those incandescents

[@TheSaxon25]

@@Buldg87 I'm going to look into that! Thanks for the heads up 🍻

[@shadetreemechanicracing22]

It's like the polar opposite of Roadkill.

[@qwiked]

I agree..Lucky and Tony are the best on MT...

[@geoff13man]

@@qwiked well lucky fixes everything and makes it mint, then tony goes and breaks it lol

[@johnmilner7603]

I like when Alvin speaks. I always liked the Mercury Cougar signal lights when the Cougar first came out, then the new Mustang copied a few yrs back.

[@kevinmaher6725]

But they both "copied" the Thunderbird which had them years before even the Cougar.

[@millerso8]

They are called Digi-Tails LED Taillight Conversion Panels part # DT1300169 for 1969, Prob '70 as well @ Summit Racing. Thank You Lucky for this series of GREAT 69 Mustang videos! Just Awesomer!! New Sub here! Just found your channel!

[@robertgrant4501]

It was nice of Alvin to describe what Lucky was doing. Lol

[@Campbase1]

Who makes those led boards?

[@lochnessfox3441]

Looking great lucky! You are truly a professional!!

[@joeschlotthauer840]

This is where we need spray chrome...

[@mattfarahsmillionmilelexus]

Brilliant results.

[@48northphotography5]

Give me a good old fashioned bulb any day. Those boards do not look like they will hold up.

[@blackbuttecruizr]

Great work @Lucky!

[@joeschlotthauer840]

Someone please step up with you PCB printer and start making LED tail light boards for everyone that requests them..

[@mrmoss149]

Lucky- isn't there something you can put inline to slow the turn signal speed down? I know I've seen that somewhere before...

[@captainsergeant]

Spray on furniture polish makes all types of plastic look like new.

[@luckysgarageshow]

Yep 👍

[@BadLogan426]

Merry Christmas Lucky :-)

[@MrKrilleevolve]

Please do normal speed! I like to hear your tips and trix!

[@jasonsutton1074]

You can use the settings to slow down the playback speed to 50%. He still sounds like a chipmunk, but you can understand what he's saying. I hope that helps.

[@sideshowindustries8074]

Who makes these LED conversion kits? Thank you..

[@Dot-Ee]

Digitalis! Awesome company

[@sideshowindustries8074]

@@Dot-Ee thanks !

[@Campbase1]

Not finding them. Do they have a web site?

[@jeramyparrish4597]

it's digi-tails@@Campbase1

[@TheCanadianBubba]

They will be great if they hold up, no changing the individual LED's when they die.

[@65Coasty]

I really need these in my '70 Mustang. Already lost one car to a dumbass that wasn't watching.

[@TairnKA]

Looks like the first lens assembly is missing a decretive bezel?

[@TheCanadianBubba]

It is painted on

[@TairnKA]

Ah, I should have realized. ;-)

[@filipewilson1842]

Yes it is. They are just glued on and often fall off, my repo ones were siliconed on and some fell off before they even got to the car! So many parts on those taillights.

[@SteveP-vm1uc]

Hey Lucky, you should add David's name to the title. It will bring more people to see your channel. "Freiburger's 69 Mustang gets LED Taillights". Come on brother, the more you make the, the more toys you can buy!!!

[@luckysgarageshow]

Good point but he’s a paying customer and I wouldn’t do that without his permission.

[@stone_302]

Even David knows sequential tri bars are amazing, and they sure are.

[@xozindustries7451]

So cool, I want a set for my 78 trans am

[@rogerdeneault6560]

nice job there alvin hehe

[@johna1160]

6:50 Everything is in real time until "Alvin" explains wiring hook-up. WTF?

[@moparnut6286]

Man they look great!

[@juancornetto8243]

Hey Lucky, didn't realise you had a channel. Sorry for being late to the party.

[@vanstechcorral]

Are those gonna fully seal from water? Or does "It Never Rains in Southern California" ??

[@kevinmaher6725]

The backside of the housing is inside the trunk. The seal behind the lens also seals to the rear facia.

[@luckysgarageshow]

Both 😳👍

[@djoham]

There's another seal that should be installed over the metal piece that affixes the lens to the bucket. This is a thick rubber piece that seals the whole assembly to the body. www.cjponyparts.com/taillight-body-pad-1969/p/TLBP5/

[@blakesracingandoff-road6353]

Looks good bud

[@yamahaxs6501]

I went 100 percent LED on the c10, and the bright factor is reason alone. Stock bulbs in 60's vehicles are just awful when you compare them. Going home from any cruise night with old timers who haven't converted is just awful. I get it if its a perfect restoration, but if you actually intend to use your vehicle, I wouldn't go any other way.

[@rguzzo3510]

lucky for President

[@mickteasdale3225]

So easy a chipmunk can do it.

[@mroptical1982]

Very cool 😎

[@elarr8733]

6:50 - Not many people know that Lucky is half Hynerian.

[@lonniegray1033]

Tell Freiberger if he ever thinks about selling the 69 Mustang to let me know

[@MJTAUTOMOTIVE]

I think you would need to Drop about $80000 + if you had any chance of buying it. David said it's the most money he has ever spent on one of his personal cars.

[@DoubleADad]

Volume sucks just saying but love tje content

[@johns6958]

8:16 Perfect

[@kickoutthehookers]

Looks like whoever sells these boards could also stand to sell something to diffuse the light, to avoid the look of "Hotspots" on individual LED's. Hell, even some appropriately sized 1-2mm opaque acrylic would do.

[@JDWorkshop-wn9tt]

Cool!

[@unclesquirrel6951]

Personally I blame squirrels

[@sergiosolorzano2253]

You said they aren't labeled left and right but they are labeled D and P doesn't that indicate driver and passenger side

[@luckysgarageshow]

Didn’t catch that. I just powered it up and triggered them

[@scottjrichter]

It’s Lucky the chipmunk

[@rickjohnson1632]

👍👍

[@RobertSiwik1968]

Stop using a drill or impact to assemble plastic pieces. All you do is crack or break them. Dealership hacks do that!

[@luckysgarageshow]

Thanks for your input. 😳

[@Towers12345]

Maybe get someone to edit?

[@babyhuez597]

First.