6L80/6L90 valve body installation

[@capitalr8649]

I replaced the passage sleeve twice and it’s still leaking from the connector. I have a new TECHM installed as well. At this point I’m tired of dropping the pan to address the sleeve. Plus the pins aren’t loose.

[@ryan370]

When reinstalling the passthrough, is it possible to secure the white clip on the valve body without actually inserting the passthrough all the way? It seems something ia wrong with my connection, and that's all I can really think of

[@SirManny4]

Great video. May have to tackle this on my CTSV

[@bal4cars]

Thanks for the video. Had to do it twice because it wasnt lined up

[@ryan370]

What ended up being misaligned for you? I think I'm having the same issue

[@vhehn]

What is all that goop smeared around the techm solenoid connectors? Who rebuilt it?

[@asylummotorsports8453]

That is the modification for the trans brake.

[@MarkWoods-j8w]

Ive done everything that was mentioned in the video, but the truck has no reverse. I was told it probably is the adjustment or setting on the main valve im the valve body, where is the main valve and how do i set that valve properly?

[@CarlosReyes-nk6wr]

Is the TCM also called the solenoid pack?

[@twavonnariggins-amodeni8198]

What do it mean if the truck won’t start or crank after installation

[@omarvelasquez785]

Help please! Is the speed sensor that harness inside

[@TheFewmr2]

Im having trouble getting the lock off the TCM with a pick any other tips?

[@ThorrEllis-h2v]

I have a 2017 gmc sierra 6.2 shifts rough sometimes and has been making a wherring noise, do you think it could be valve body or solinoids?

[@jasonvivian9770]

how much time does it take to remove a valve body to replace the check valve balls?

[@ordovicicosilurico6799]

If the solenoid #1 is fail you have to replace the hole valve body ? theres no way no to exchange the valve body only ?

[@mike2323909]

Where are the shift solenoid located on this transmission ?

[@cruzmunoz3405]

Great video

[@rosspok]

I followed everything on your previous video and now I’m trying to install the valve body but it seems to me like the tcm internal connector is stuck. Please help

[@asylummotorsports8453]

It can be a little stuck in the case. Should be able to pull it out of there though.

[@jeffmay2587]

Nice video

[@mdfaruque3513]

Please tell me location of tcm

[@ggarciah983]

Where do yu send them of to agian?

[@asylummotorsports8453]

www.getawaycarz.com

[@fidbau48]

Great information!!! Thank you!!

[@robertjluna]

What is the torque spec for the 11 bolts for Tcm module to the valve body?

[@bronsoncashiola1426]

SUP!!!!!!!!! Make more vids:)

[@asylummotorsports8453]

I'll try lol.

[@jaypike4061]

Junk gm transmissions

[@asylummotorsports8453]

Please educate me on why they are junk?

[@jaypike4061]

@@asylummotorsports8453 th350 th 400 Bullitt proof. 700r4 don't last, I've had 2 6l80 blow up.......nothing lasts nowadays, u should know what's good

[@davidschwoyer]

Friend of mine suggested I replace the transmission with a 350. Like I don't use enough gas with 6 speeds