6T75 TCM REPAIR.

[@jamesj1523]

Love how your hands are in the way of any of the important parts like replacing or taking out the old/new pieces.

[@CRAZY_VIDS07]

Exactly

[@PTucker0864]

Proof.....any 'ole redneck can install $50 of parts and charge $1500. Could've put the camera facing from the other direction, but that would be too smart.

[@Noturavgjo143]

Love how no one bitched until about one year ago. Proves people are wussies these days.

[@TheStlrsfan5]

Thanks for the inspiration. This job is not hard. It might be helpful to show you putting rubber flanges in tool before installing into TCM.

[@stevegriffith7236]

Listen up people who watched this . Do yourself a favor and order a solenoid body filter plate. He still has his stuck on the solenoid body and Tom assembly. The filter has a bead of rubber which will sometimes delaminate or even RIP apart when separating the valve body. It's the piece with all the oval ports in the video.

[@salvadorchacon5880]

Buen día, disculpen la pregunta, hay forma de cambiar solenoides en esa pieza

[@joseguerrero4564]

Bought a 2014 acadia USED but as soon I brought it home on the highway started to shift weird took it to autozone to see what's the code for the engine light and came up the tcm selenoid I'm about to take it a part and already order the rebuild kit I hope that's wrong with that car wish me luck

[@fayez6995]

U just screwed youself

[@youdagoob]

The GM Lamda platform (Travers, Enclave, Acadia) are some of the crappiest vehicles around. I would know. I have a 2012 Buick Enclave and it is CONSTANTLY being repaired. If I wasn't a DIYer, it would have sunk us financially.

[@TheMostWanted9509]

Where did you get the kit from ? That would help a lot if you can put it in the description

[@abelmartinez1428]

It depends if it different transmission

[@rohon4972]

I think I may have found the kit .(124740-TL30 Pressure Switch Installation Tool Kit Compatible with F/124740-30K, PR SW, 6L45/50/80/90 & 6T70/75) on Amazon

[@guga9112]

Is This work done to fix the Transmisión hesitation??

[@superman1971zzz]

Nice video, more instructional this time on showing what you're doing. I have to say you had me laughing when you made the mistake of forgetting the little button the second time.

[@jamiemorales2022]

My tcm assembly doesnt have those hose with the seals

[@heidiadair9008]

I can’t find the kit can you please tell me where you got it? Thank you much!!

[@jesuscelvera1176]

When you put the new seals are the flush with the TCM? Or are the popped out a bit?

[@archangel3237]

They stick out slightly so they squish a bit to seal when installed. Same as any other oring or rubber gasket

[@DatBawCasen_]

So, you can’t replace the solenoids in these?

[@JorgeLopez-ip9oc]

Thats my question, i cant figure out how to remove the solenoids 🤦‍♂️ seems like everybody prefers to just buy the whole tchm, instead of just buying the new solenoids and saving us some money 🤦‍♂️

[@jwilton2909]

It would’ve been helpful to say where you got the kit.

[@butter1441]

What are the parts and tools you used ?

[@happyfamily1690]

Can you help me to get the repair kit by sending the The link to buy it or the part number

[@droopsthedj]

Hey any chance you can share where you got the kit from? I have a 2013 with the same issue and would rather repair it than buy the whole valve.

[@Chrisderwin78]

one of my little plastic piece is missing. The very last piece you remove. Any place to get those?

[@tbucks1000]

Definitely sounds like what's going on with my traverse. I think I'm gonna try it myself. Just curious, how much would you charge for this job? Great video

[@letratu_vlog]

Hi robert where can i buy those repairs kits thank you

[@dansarette101]

My 2010 Traverse has the delay when put into drive, and the problem of not up shifting pass 2nd gear every morning. You have to stop and put in park then go or use the manual button upshot to get it pass this issue then move shifter into drive after u get pass 2nd gear. But it doesn't throw any codes...why not? Does it have to throw codes to still be the disc problem?

[@gregcross6017]

did you ever fix that, i have a 2010 acadia with that VERY SAME problem, it has 212K miles on the transmission and works fine otherwise. A pro shop told me its a speed sensor inside the transmission itself.

[@rrandolph63]

did you test the solenoids first? and if you did, was it on the bench or with a scanner?

[@yarok.c7465]

Hi friend am fro Baghdad I have Terrain 3.6l 2013 SLT .MY TRUCK MOVES VERY SOFT 1st and 2nd and reached rpm 4or 5 to shift the 3rd what you think is it the solenoid or the clutches..it started when I flashed the old oil changed it with new one .thanks waiting for your response.

[@henrymoreland1145]

Hey mate. I have a 2007 WM Holden Caprice V8 with a 6L80 transmission. Been told the TCM is faulty. Has only 1 forward gear and reverse. Will this repair fix my TCM.

[@nilsonfelix2952]

Essas peças que embaixo do reparo da membrana consigo achar? Perdeu as quatros de plásticos que vai embaixo das membranas

[@Benbenford]

Hi sir. What is the name of the tool by which the piece of rubber comes out. I would appreciate you writing me the name of this tool because I want to buy one via Ebay. with my respect

[@martyvasquez4286]

2012 Acadia. My only symptom is that sometimes it takes a second or 2 to get into drive after backing up. Is that the waveplate or the discs acting up?

[@jessewebb4302]

We had our wave plate replaced years ago and it just now started having a delay shifting into drive. They say we now need to replace the TCM.

[@kenco821]

Great Job saved me a lot of time

[@randyrivera1089]

i problem on my buick 2009...p0796 code.. pressure control solenoid c is stuck off...

[@JorgeLopez-ip9oc]

Hey buddy were you able to fix that problem, and how i'm having the same exact problem with my 2011 traverse

[@Pooks838]

Great video! I have a 2012 Traverse that has codes P0989 and P0872. She bucks sometimes at highway cruising speed. This looks like an easy fix. Do I need to reprogram anything after this or would a simple battery disconnect/reconnect or code clearing be ok?

[@justinRoo88]

How do you relearn shift points?

[@jimpowell9205]

Is this the same TCM, that’s in my 2011 Buick enclave ?

[@GAYKLINE]

I have a 10 acadia and I did this to my tcm do I have to use a scan tool to rest anything it has a shutter sometimes when the traney lugs

[@youdagoob]

The shudder is likely the torque converter... a common problem on the Traverse, Enclave, and Acadia. Had to replace the torque converter on my 2012 Enclave to fix it.

[@proudsupporter1282]

I have a 08 saturan vue xe 3.5 awd, when driving will go to neutral by itself. When this happens it shows no numbers for manual shift. So put in park take key out wait 10 seconds or so put key back in. Put key in run engine off when muanal shows a 1 i know its good and will move and be fine. Have any ideas. Mileage is 145.000. Thanks

[@zaino660]

Excellent job, just why you are fixing that..what was the problem

[@chrisstromberg6527]

Somebody buy this guy a pick, to help get them covers out.

[@dpipiles]

Where did you get your kit from? great video!

[@janelleronquillo3839]

What kit did you use?

[@tariqalmalky5273]

hi dear Rob i am out of the US and i am trrying to find the part number 124740-28K i found on ebay which will cost me 150$ but also find them with 124740-30k number is it diffrent or same btw i have chevy traverse 09 4*4 and do i need the tools to fix them or i can manage with normal tools bec its so expensive

[@robertrushton6622]

12470-30k is a updated number that still comes with the tools transgo also makes a kit without the tools that's a lot cheaper and it works you will need to take your time and be patient it can be done with a pick

[@tariqalmalky5273]

@@robertrushton6622 thx a lot bro

[@brandonmiller3380]

Great video, just curious if you had a parts number to the piston between the laminate disc and the tcm? Found the sonnax part number but can't find any for sale

[@rebeccanasca9924]

I ordered a kit like that from sonnax but they didn’t send the little yellow parts that go under the orange disks. Do you know where I can get those? I can’t find them anywhere

[@acunitedhtx]

where do you buy the solenoids inside the techm? The eyeball are nothing.

[@marclepesant6932]

Great video. Thank you. Is the part number the same for an Outlook XR 2008?

[@TheGrimmReaper47]

What is the tool you are using to make the washer flush??

[@vietpride09]

Hey Robert do you know the part number of those seals you replaced?

[@robertrushton6622]

Part # 124740-28k it is made by sonnax and can be bought at transtar, and wit good luck with the repair.

[@rockstyle45]

From where did you buy this kit and what is name of this kit or part. Your video is very helpful same issue I have with my gmc acadia 2008 but I don't find this kit put link in subscription from where can be order these part

[@colassolorzano6353]

I got a 2010 chevy traverse and i got all the codes those on the gm tsb So about the pressure switches 4and 5. So doing this repair will fix the problem. Thank you

[@sanadtp9548]

Hi Colas... mine showed same error code... did you fix those?....

[@devynblake5273]

I have a 07 Saturn Outlook that thow up the codes for pressure switches

[@soniccash1up]

What were the symtoms? Besides the codes, I have a issue cuz the car bucks while driving

[@soniccash1up]

Changed, fuel pressure regulator, plugs, packs, air filter, cleaned throttle and maf. Thinking it might be this, any ideas?

[@robertrushton6622]

+soniccash1up it can cause a flare shift or a shudder also harsh shifts it would depend on witch pressure switch is blown out.

[@SidneiPoeta]

what symptoms ?? i have problem and code p0700 chevy traverse 2009

[@alejandroescarcega9288]

I wish you had the camera from other angle so I don’t see the back of your hand all the time!

[@guga9112]

Great video thanks, My question is to get this job done is necessary to take the transmisión down? Or is a way to remove just tHe valve block out? Thanks

[@robertrushton6622]

you can remove the valvebody its on the front side of the transmission close to the radiator behind the side pan

[@drewhin663]

@@robertrushton6622 where did u get the repair kit

[@rockstyle45]

From where can buy this repair kit and how to find part number of repair kit for gmc acadia 2008 module

[@marvinbatista1333]

Were can’t order this parts

[@rubberman2006]

what's the part number or where did you get this kit at?

[@automechanicabrarkuwait]

Nice tips bro

[@youdagoob]

The ONE THING I came to learn is completely obscured by the back of a hand.

[@ME-ms8en]

I have a 2013 GMC Acadia that randomly decides not to shift properly. We had flushed the transmission after it started acting up (no trash/metal seemed to be present) but it's still acting up. What soecific codes would I be looking for it to show if this is the issue? Thanks!

[@archangel3237]

P0989, p0877, p0872, etc. Anything mentioning the pressure switch circuit

[@homeboyworkshop2522]

Hi Rob my name is Alex I was wondering do I have to reprogram the TCM if im only doing the kit for the original TCM from the vehicle that came with the vehicle.

[@robertrushton6622]

No you don't have to reprogram the tcm for this repair

[@DannyVillagrana]

i may need to do this repair but i just bought a new tcm temporary fix and then got the different switch codes this time still no forward gears only reverse. i have 07 saturn aura 6 speed i believe i need to replace 35r clutch wave do you know anywhere i can get this repair done san jose california bay area? 2nd question if my seals are busted where do i buy the kit or screens and the tool you used to seal them?

[@robertrushton6622]

+Danny Villagrana I don't know your area as far as shops. If your Saturn has a reverse with out forward engagement the transmission will need to be taken out and apart it could be more than just the 35r wave. The repair kit I used is made by sonnax

[@kartboarder22g17]

It is your 35R, waveplate, GM extended the warranty on your car to 10 or 12 years or 120k. If you are past that then I guess that sucks.

[@jwilton2909]

I suspect that, like myself, most viewers of videos like these ARE NOT MECHANICS. At best we are intelligent and brave enough to tackle a variety of repairs using excellent video instruction. So when this guy skips over details like how the small white plastic inserts have 3-contact points that need to be aligned properly-it isn’t helpful. Also when he uses the tool to insert that black rubber seals he holds it off camera instead of showing how it has to be placed in the tool so the top edge goes in evenly not crooked, so that it works correctly when inserting the seals into the pressure switch. Of course if he makes these videos for other mechanics I’d like to know who they are so I can avoid them. That’s because I’m of the opinion that a mechanic worth $50+ an hour should already posses this knowledge. But that’s just me. Or is it? Fortunately for me I watch as many videos as I can on a given repair and caught those details in other videos.

[@gregcross6017]

bro you cant do this job by watching a video. sorry but no.

[@88irocvert]

Can you tell me more about the orientation of the disks under the film. Also, would you know where to find one if one was missing like what just happened to me.

[@diegocame]

where you buy the parts ?

[@SPORTREALMADRID89]

did you have to drain the transmission fluid??

[@Change-Maker]

Yes

[@fowler0001]

Where can I find the repair kit

[@robertrushton6622]

SONNAX IS THE SUPPLIER OF THIS KIT PART #124740-28K IT IS AVAILABLE AT SUMMIT RACING, JEGGS, TRANSTAR, AND WIT

[@michaelelliott289]

In a rush to get it done. 😁

[@ld2032]

Would this kit be the right one for Acadia 2010 also? I have same check engine codes with stuck in gear intermediate.

[@robertrushton6622]

a 2010 should be a 2nd gen trans and not have pressure switchs but that's not always the case the trans could be a late production 09 or used unit could be installed the only way to know for sure is to take it out

[@ld2032]

It has pressure switches. Ordered and changed. Two of them were busted. The hard part was disassemble and reassemble. But car shifts great now! Thanks so much for this video. Transmission shop said trans was shot and needed new one at$3000. Lol. This video and $55 parts. Done.

[@twofast4nu]

Or 2010 AWD has a shudder to it occasionally and I'm throwing the same codes. I'm curious which valve body mine has. I'd like to try and replace/repair mine instead of a complete transmission replacement

[@robertrushton6622]

you should have a second gen. unit without the pressure switch, you may have to go further with you diag.

[@twofast4nu]

@@robertrushton6622 thanks! I think I'm going to go ahead and replace the transmission this summer. It currently has 190k on it so a complete rebuild or replace probably makes more sense.

[@AsombrosDiarios]

My 2013 GMC ACADIA is vibrating from 2nd shift to 3rd. Is this the problem? Feels like the engine is dying. Great video by the way.

[@devynblake5273]

hey what is the pressure witch kit called be cuz I've been looking everywhere for it

[@mitchellcpj5087]

devyn blake its from Sonnax, pressure switch seal kit

[@ابوموسى-ف7ي5ح]

Not Arcadia, it's Acadia,

[@GodZilla-tv6gr]

Hi nice video,wanted to know about resetting shift parameters,what is the process for that thanks any help will be appreciated

[@robertrushton6622]

+God Zilla I use a snap scanner or a otc scanner it will reset the kam and apply clutches with out it moving then have you drive at a certain speed and stop to reset the parameters I will do a video soon on this thanks for the idea.

[@GodZilla-tv6gr]

Thanks that would be great,i also did the repair and the pressure switches all the seals were blown,i put everything back together car drove like a champ and suddenly drive just gave out,i managed to get the car home and it turns out i didn't refill the trans properly at least thats what i think happen,car driving ok now fingers crossed,Thanks Again

[@gabeborscheid3828]

@@GodZilla-tv6gr Any update?

[@JOHNdOE-yy2ld]

Do you have to replace the filter plate?

[@robertrushton6622]

no but if they are clogged you may want to clean them

[@gabeborscheid3828]

Yea manual says to replace, but I haven't heard of anyone doing that, also having trouble finding the plate. I'm not gonna do mine.

[@kevinalbertson6875]

You basically know what needs done but the CheapSeat view of small parts doesn’t help. Basically, I watched a video of you doing something. Maybe change camera location? A second camera? Oh, what was the Symptom the customer experienced? What did the damaged something cause? Keep trying! Thanks

[@johnford8369]

Hello i have different codes p0752 and p0700 on my Outlook. 270,000km on it and the trans fluid drained had no metal shavings in it. Would this fix it? Or do i need to replace the entire techm?

[@SidneiPoeta]

Did you fixed?

[@johnford8369]

@@SidneiPoeta Yes i bought the kit and replaced the discs and the codes went away and transmission has been perfect since then. The original discs were cracked also.

[@fernandocolunga8947]

@@johnford8369 did you bought the kit shown in video? And can you explain what the discs are please

[@LuisRodriguez-hp5dd]

Where a d part numbers for replacement kit?

[@rodolforios1057]

😎

[@goksalsipahioglu5768]

Hi mate i have very similar problem im in uk is there anychance you could give me a link to repair kit for the tcm i can get the solenoids but not the kit to seal it Many thanks

[@angelalovebalt]

Where is this at on GMC Acadia

[@robertrushton6622]

It is on the valve body behind the front cover

[@TheLarrymaysey]

You're hands are in the way.

[@stevegriffith7236]

Might as well not even have a video. Looks like he zoomed in from the space shuttle

[@sladjanastrbac607]

i wish the at i wode see you in the you know

[@teonazoidze3067]

wrong installation

[@reefaddict6137]

All i saw was ur ✋️s

[@Tdg-uu6sn]

Super bad design why not just have it sealed off solid

[@Patrick-zk2ht]

Poor video, can't see what's going on and you're breathing awful hard.