7.3 powerstroke A/C compressor pulley and clutch plate install goes wrong

nohalfassapparel.com
Donate here to support the channel - paypal.me/NoHalfAss
Move Bumpers- bit.ly/41hc97w
Coupon code: NoHalfAss
Amazon links:
Oil drain valve- amzn.to/2OZpLA2
Rev-X oil additive 2pk- amzn.to/3rx8NvP
FL-1995 motorcraft oil filter- amzn.to/3kUYQXC
My high torque starter- amzn.to/37i7Qft
DB electric high torque starter (if first link isn’t available)- amzn.to/2rHPPbm
Mishimoto trans cooler- amzn.to/3boL8Gj
Mishimoto performance radiator- amzn.to/41gGCCG
Edge monitor (gauges)- amzn.to/3TWRoMQ
KC300x turbo- amzn.to/3IsRkO5
200 amp alternator- amzn.to/2EvagLD
Dual steering stabilizers- amzn.to/2HlRkjQ
Front grill- amzn.to/41enN3b
Bulletproof 16” drop hitch (no sway bar attachment upgrade)- amzn.to/38eSefP
Tow mirrors- amzn.to/49gFp0X
Afe air filter- amzn.to/2YMbVEi
Updated headlights- amzn.to/31mv3tX
Tailgate assisting shock- amzn.to/2LqZvyo
4” LED light pods- amzn.to/2MhI84W
42” light bar- amzn.to/2M9honh
Rock lights- amzn.to/2ZdI1fP
Bluetooth wiring harness- amzn.to/2ZfNYsH
100ft black and red wire- amzn.to/3dYWssd
5x8x18 exhaust tip- amzn.to/2VnTKpt
5x7x12 aFe exhaust tip- amzn.to/2JaVgnS
Archoil friction modifier- amzn.to/3aHyWi4
White bed liner spray- amzn.to/3awRiCm
Candy blue paint- amzn.to/2WgGDHi
Solar panel battery charger- amzn.to/2YPtlAe
White Rodgers glow plug relay- amzn.to/388ekPh
Rev-X oil additive- amzn.to/33FYyYt
7.3 international badges- amzn.to/2KD28vY
7.3 international badges- amzn.to/2KCu8PY
Upgraded fuel pressure spring- amzn.to/2OMqfcz
Napa 6637 air filter- amzn.to/2YTHxZ0
Smoked 3rd brake light- amzn.to/30tCRcS
Air intake heater(AIH) delete plug- amzn.to/2K4CqAK
5” straight pipe- amzn.to/2XoLszG
MBRP 4” turbo back straight pipe- amzn.to/2XnD2bN
Everlast welder- amzn.to/2IxkMUp
Wheel cleaning brush- amzn.to/2rVgQI7
Shackles on front bumper- amzn.to/2XlQuKc
Smoked tail lights- rover.ebay.com/rover/0/0/0?mp...
Air intake heater delete plug- m.ebay.com/orderDetails?itemI...
Riffraff AIH delete code eliminator- www.riffraffdiesel.com/air-in...
There are eBay affiliate links on this website, if you click those links and make a purchase I may receive an affiliate commission.
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites
2001 7.3 powerstroke F250 F350 ford superduty

[@luckyred1818]

Im a florida located 7.3 wrencher too. Tough conditions to do work twice. Bummer! Trucks come a long way man! Nice

[@NoHalfAss]

Thank you bro!

[@supertom8787]

You should have your freon levels checked

[@NoHalfAss]

I was thinking about it. Maybe even having it replaced. People say Freon “doesn’t go bad” but maybe it would help anyways. I checked it with one of the Freon cans with a gauge and it said it was at the proper level but idk how reliable that is.

[@supertom8787]

Yah my 99 f350 was blowing cold and hot not steady I needed to take it to a ac shop they need to check high and low side of your ac and for leaks shouldn't need replacement just make sure levels are correct to high or to low will cause it

[@NoHalfAss]

@@supertom8787 for sure, I’ll get it checked out. Thanks man!

[@twinscrew9.047]

At least yours is easy to get to

[@NoHalfAss]

Hahaha I know I’m grateful with how easy it is to replace.

[@twinscrew9.047]

@NoHalfAss did you ever look into the gearvendors underoverdrive unit pull it up on the internet I got one on mine with supercharged kennebell V10 and I have 4.88s and it allows me to get about 17 on highway

[@NoHalfAss]

@@twinscrew9.047 I did actually look into it bro. I may get it someday when I have the extra money but it’s a little harder to do upgrades on the truck right now. Lol. Money got tight with some changes in my life.

[@twinscrew9.047]

@NoHalfAss yeah I understand I would definitely get one when you can you will love it have a good one

[@MrPowderEater]

Hey Cody I didn’t hear if that was an open part or an Amazon special? I need to do my clutch as well and I don’t want to run into that issue

[@NoHalfAss]

It was a brand new one from PartsGeek.com, so I was surprised this happened. I wouldn’t trust a part like this from Amazon, but even from a more reputable source you can still get a dud I guess. Lol

[@formula19]

Hope you get a better part next time bro. Something I started doing was laying one of those small bathroom semi thick rugs over my front hood. Takes a huge load off of your joints and arms or knees. Also wondering if you had your frame rails sanded and painted with POR or something? I have surface rust but looking to get mine done at some point.

[@NoHalfAss]

That’s a good idea man, thanks! And the shop that did my lift sanded and painted them. I couldn’t tell you exactly what type of paint they used though

[@formula19]

@@NoHalfAss good deal bro. I was thinking of getting the shop that will be doing my 8-10” (at some point) to do mine while they’re at it. Glad you posted this video even though it didn’t work out thats genuine content I like seeing. Makes me feel better about my repairs here and there that didnt work out. i go thru the same stuff. Keep truckin’ 💪

[@NoHalfAss]

@@formula19 hell yeah bro that’s awesome. I think a good shop will do it anyways but you should double check. Because I didn’t even think about it or ask and they never mentioned the paint when I got the quote or dropped the truck off, and when I picked it up after the lift was done they did it and I didn’t even know. I was super happy about it

[@formula19]

@@NoHalfAss thats pretty cool of them. Who did you go to if you don’t mind me asking. Ive been going to a shop in Orange, OC for some of my work and repairs.

[@NoHalfAss]

@@formula19 I went to Atlas spring. They’re in La Puente LA county so not too far from you and I definitely recommend them!