I pulled the terrible stock motor dropped in a Hobbywing 3200kv its now a beast on 4s
@dannyh9825 жыл бұрын
What pinion?
@andyhamilton22025 жыл бұрын
Good info my dude. 😎
@huckaberryfpv49865 жыл бұрын
Awesome tips,thanks
@justinjones52815 жыл бұрын
The epidemic is 1/8 scale same electronics if anyone was looking for same price range but al little bigger and better. Check it out. Great info here
@war_josh15505 жыл бұрын
Nope the epidemic has a much bigger 4274 1600kv motor that doesnt overheat unlike the tenacitys motor. The esc in the epidemic is a hobbywing sc8 100a 2-4s lipo. The epidemics electros are really good
@STEVOD3135 жыл бұрын
Nice tips broski
@smitheshn66375 жыл бұрын
Good info......
@operation11charlieinc5 жыл бұрын
Good info brother
@RazorRC5 жыл бұрын
11CHARLIE RC thanks!
@operation11charlieinc5 жыл бұрын
@@RazorRC 🤙🤙
@sledman56ify5 жыл бұрын
I race the sct Version and I put a heat sink on and fan and havent had any problems ... trucks one of the fastest out there box stock everything
@JUICY_TIME5 жыл бұрын
Great informative video👍 they are basically a force r.c with the losi name🤔
@timonthornley26562 жыл бұрын
HI! Can you review the new Tenacity DB / TT Pro? changes / upgrades / Now metric / tuning etc... Would be great :)
@LawrenceTimme5 жыл бұрын
This truck has so much wasted space in the chassis, it's got enough room to fit 1/8th scale motors and esc
@twinturbotony935 жыл бұрын
Mine got up to 288 on the first run. I geared it down with the Mip 41t spur and 10t pinion. Still ran too hot for me. Just put the motor out of my thunder tiger buggy in it. Problem fixed.
@RazorRC5 жыл бұрын
What's the timing set at on your ESC? I noticed the manual says 0 deg, but it needs to be 15 deg for the Fuze. Not sure if that's a typo or the early versions really came with the timing set wrong.
@twinturbotony935 жыл бұрын
@@RazorRC IDK what the timing is at. My hobbywing program card wouldn't connect with the esc.
@Furadi5 жыл бұрын
@@RazorRC where did you get 15 degrees from?
@RazorRC5 жыл бұрын
@@Furadi stock ESC timing is 15 degrees. I tested 7.5 and 11.25 also, but those run hotter than 15 degrees. It's adjustable (setting 9) on the ESC.
@Furadi5 жыл бұрын
@@RazorRC Interesting. I got mine used and I don't remember what it was set to but when I set it to 0 it ran much cooler and had more punch. Like noticeably more punch. Maybe I'll try 15 later.
@dylanwhite65394 жыл бұрын
I’ve said it once, I’ll say it again. KV makes no impact on power. KV is really just to fit the gearing. Motor physical size (specifically the magnet size) is what changes your power. It does seem like these trucks are better suited for closer to 3000kv
@jayinman73795 жыл бұрын
I ordered the new leopard 3670 v2 2400kv motor and put a 17tooth pinion on it and the stock motor and gear slot faster and stronger. Even with that leopard motor it was running hot. So I heated it down to a 16t it ran cool but had no speed and no more 30mph wheelies . So don’t waste your time and money on that motor. Thinking about the castle 1512 motor
@aarong40824 жыл бұрын
Did You run that setup on 4S? It works great!! With 4S!
@bretttuley65375 жыл бұрын
Can you add a link for the heat sink?
@mannyfran80243 жыл бұрын
Great video. Shoe Goo my body, got fan for motor but unfortunately My Tenacity MT chassis shattered on my 2nd run. The front assembly totally separated from the main chassis. Anyone know if the Tenacity DB's parts are compatible.? Was thinking of getting a used DB and swapping parts.
@philthyco15 жыл бұрын
I might get the Truggy..Your thoughts?
@RazorRC5 жыл бұрын
I feel like it's only good if you get the Proformance kit too. The plastic chassis is hella annoying.
@philthyco15 жыл бұрын
@@RazorRC The battery tray for sure lol
@jayinman73795 жыл бұрын
Bought one brand new after one run I noticed s strange noise coming from the center diff area. Removed center diff and noticed the rear center diff drive shaft was worn right down and the center diff cup has grooves in it!! Metal shavings all over in that area. I beleive it’s wearing so badly because of the steep angle the driveshaft is from the high ground clearance on the diffs to the center diff.anyone else have this issue?
@RazorRC5 жыл бұрын
jay inman no extra wear on mine, make sure everything turns smoothly front and rear without the motor/pinion attached
@stevewest72605 жыл бұрын
Biggest tip for this truck. My first run on a 2s lipo after 10 minutes was 200 degrees, called Horizon Hobby, they said it's good for up to 250 degrees. Evidently there knowledge of RC brushless motors is poor. I mean come -on this these electronics are capable of running 3s. Far as I can figure the tech support for Horizon Hobby are IDIOTS !!! The fix- I shortened the mounting bolts for the motor 1/16 or 1/8 inch ( I'm not sure now) and also added a lock washer. The temps. on a 2s battery are now 110, on a 3s battery are 160. Put a Dynamite cooling fan on, temps. at 70 degrees outside don't go over 145 running a 3s battery. That's a huge change ! The whole problem is to long of mounting bolts. Long story short, Horizon Hobby tech does not know or care what there talking about, think they read off a sheet like telemarketers.
@RazorRC5 жыл бұрын
Good tips! I smoked my ESC today, so going to put in an Arrma BLX100 combo.
@stevewest72605 жыл бұрын
@@RazorRC That's a good one. I just don't care that the ESC doesn't have a drag brake adjustment. Really do like the Dynamite ESC over Arrma's 100 series