[7] Master Lock 175 Bypassed and Decoded

[@wbwills2]

Liiike it. I’m southern as heck & proud of it. Take care

[@user-rw3qq2sr1z]

Ou have a great assistant there 😊

[@MrVman858]

I did it by listening to the mechanism inside of a 175 that’s been locked for years. Age made it easier to hear the pins, took less than a minute to unlock

[@tinyb69]

Now we know who to call when the foreman changes the combination on our Knaack cabinets on the job site. Greetings from your brother from IBEW 948, Flint, Michigan. Retired.

[@chipper442]

IBEW 42 here New England, I found a 175 and was trying to reset the combo and found your video. Thank you.

[@outskirtscustoms]

On this particular lock if you press the hasp down while spinning the numbers you can listen for a very distinctive click when it reaches the correct number versus the click on a non correct number it takes a little bit to get the feel but going one number front to back at a time you can figure out the combination you must have the hasp pressed down for this to work as it releases the tension off the lock.

[@skexone]

It has a bigger gate just like the 875, right? And every false number is set with a false gate?

[@BBrock641]

HELP! I have a Master 175 MCACD. I am unable to feel any detects trying to open a lock I neglected to write down the combo. Any ideas?

[@aaronbarton3039]

Who woulda known Dave Ramsey was a lock picker

[@33livestock11]

I just came here to say the same thing 😅

[@haritchie3460]

Now See how .. just have to find or make the parts by hand. .its my brother lock he past away. Still good lock..

[@parapicktog7734]

Thank you for that. I have a 175 I been unable to open yet. Btw: brother...I'm a proud member IBEW 424 (retired)

[@MartinAston00]

You can legit just roll your thumb back and forth to decode this lock. One of the first locks I ever decoded.

[@elijahhilb6518]

Explain. I want the code on this lock. Can only open it with a shim I made.

[@jwn5]

You sure it was the 175? I'm working on one right now but issue is since the shackle is spring loaded I can't use that trick, it doesn't lock up the number to feel which ones more loose, so I'm trying a decoder I got

[@hillbillylocksport5547]

Man!!! I subscribed just because of your accent!!! And the way you talk to your lickpicking partner!!!

[@hillbillylocksport5547]

You sound perfectly normal to me mr. Ramsey

[@coreturkoane5570]

Guys so I brought one of these locks and either master lock tightened the tolerances because I can't shim it from a hair clip I made. I ordered two Peterson shims to try it out. I also tried to bang it open using a hammer tapping on the side while pressing the shackle....no luck. Am I doing something wrong?

[@michael8205]

I have a master m178 combination lock I have managed to find the gaps beside the wheels and it has stopped on 1278 any ideas what numbers I would have to put in for that

[@skexone]

What thickness of tool will bypass the side of the combo wheel?

[@angryagain68]

You sound just like Dave Ramsey

[@erickcazares7592]

When I heard about the first president hint most likely comes to mind is 1776

[@ryancurtis766]

You sound like Dave Ramsey.

[@chuckdawg2799]

this lock is very handy for our non profit - so we have a code eveyrone knows on multiple locks. but damn.

[@erickneasbitt]

I did this for a lock I found in a tool box I bought at a pawn shop and found the slots 9-0, 7-8, 9-0, 7-8 so I put it on 2020 but still won’t open any guess to why it won’t work

[@AquaTech225]

What has worked for me was find each number that has a gate/gap. Of it don’t open with the numbers found. Rotate each wheel one number an try an open. If it don’t rotate each once more try again. And repeat until it unlocks

[@elijahhilb6518]

Can open it easy but I don't know the combo. I found it on the ground with the code on it. Opened. Forgot it though.

[@noahway13]

I have a feelin' that you sound like that when not on video also...

[@bazoil007]

Hi Does this bypass tool work on the Abus branded padlocks?

[@coreturkoane5570]

The new master lock 🔒 175s' this won't work. The tolerances are too tight!

[@MKultrapdx]

That is the issue I'm having. Been trying to roll the numbers and listen for a change but that also seems pretty tight.

[@butre.]

alabama? I'm just down the road in biloxi. we should exchange challenge locks. I like "not at all" when clearly another person whos not entirely privvy to the method has a voice that says no

[@beca_vids5287]

Where can I get this tool from?

[@noahway13]

You can make your own from a Feeler Gauge. Look on KZbin for DIY decoding tool.

[@elijahhilb6518]

Hair clip.

[@drof2th]

You sound JUST like Dave Ramsey! Why not just buy a new lock and be "better than I deserve"?

[@jaredmendez9705]

Dead on

[@Jacksonjames4]

That’s perfect

[@nothanks9184]

That's a union lock..

[@mendonesiac]

There's no shame in having an accent, man.

[@theplayer2286]

Who does not have an accent?

[@lutoveti967]

Bullshit... doesnt work on my 175

[@artosbardo1271]

What are these people doing? This has no useful information whatsoever >

[@elijahhilb6518]

Leave the video then moron

[@BBrock641]

HELP! I have a Master 175 MCACD. I am unable to feel any detects trying to open a lock I neglected to write down the combo. Any ideas?