7 Month Update on using my 60 watt jpt Mopa Fiber Laser

In this video I discuss what I’ve added to my 60 watt jpt fiber laser. The accessories I’ve added and how they help and what they do. We talk about major production differences in leatherette. This fiber laser has been a true work horse.
Haotian laser Facebook group, contact Pascal Liu: groups/fiber...
This is an Amazon affiliate link, I may be compensated a small amount if you use this link.
Starrett 135 level: amzn.to/3rgDjOm
This is an Amazon affiliate link, I may be compensated a small amount if you use this link.
6” affinity fan: amzn.to/44yPfcQ
Air assist kit: lightsource.pro/product/fiber...

[@RichardNBBarrett]

Oh no Robert, im afraid im going to need one of these now 😊great update, ty for sharing

[@computercreationz]

I like spending someone else’s money for a change. thanks for watching!

[@oldstuffcalban]

Excellent video. Lots to think about for future purchase.

[@computercreationz]

thank you ! glad it has given you food for thought

[@4-Aces-of-Spades]

That is what I call a really usefull and helpfull video !! 👍

[@computercreationz]

Glad it was helpful!

[@jasongibson1823]

Now I want a fiber! So cool

[@computercreationz]

There allot of fun and profitable!

[@LSEngraving]

Thank you for the link, sir!!

[@computercreationz]

You bet!

[@wck2318]

Thanks for sharing this information. I'm looking to get a fiber laser soon to go with the co2 and diodes I have. That table that you showed looks a great piece of kit when you want to get exact coordinates for lasering, cheers mate, just subscribed and thumbs up. Oh what make and model of fiber is that you are using?

[@computercreationz]

it’s a 60 watt Jpt Mopa fiber from pascal Liu

[@ozziesoto2955]

Sir, I also have a M7 mopa purchase from Pascal, awesome person to deal with and very responsive. May I ask what are your setting for the leatherette? Thank you!

[@computercreationz]

2400 mm/s max power 72%, freq 40, qplse 200, .05line interval, bidirectional, 1 pass

[@Manlilow]

Great Video, you didn't mention how you unit has worked over the past 7 months, any problems and how good was tech support and parts replacement?

[@computercreationz]

Not one issue, had some questions and Pascal has been very responsive also ordered a 300mm lens

[@shellyjorgensen2441]

My husband will be making my enclosure. What did you use on the back for the tower to go up and down? I am getting the same laser as you have and I will need to order that also. Where did you get the Laser safety glass and what are the walls made of? If you could help me out with this I would really appreciate it. I did let Paschal know that you are the one the got me to buy from him. I haven't hit the buy button yet but I'm getting ready to. Did you put two doors in so that if you wanted to use the rotary you could just open them both up? I would want it to work so that I could still do tumblers in the tower. Pascal said he would throw in the tower extender. Also what side is that and where did you get the safety acrylic from?

[@steinbierz]

Great video! I'm curious if the exhaust picks up the small metal pieces from engraving coins or does it just blow it away from the coin so that, like you said, you're engraving on clean metal?

[@computercreationz]

the small metal dust is left behind to be cleaned up

[@steinbierz]

@@computercreationz Thank you!

[@billb295]

Im getting ready to order a 60W JPT M7 MOPA and im glad i watched your video before pulling the trigger. I did not know about the tower height situation for the use of 300MM lens, Just contacted the company to ask about the tower height. Thanks for the great video, and the other info is VERY helpful. Now I know the in line fan is the way to go VS the floor type smoke evacuators. Question, can you rig the air assist and fan to kick on when you fire up the laser OR do you have to manually turn them on?

[@computercreationz]

I just turn on my fan manually. Good luck on your purchase

[@computercreationz]

I don’t know of a auto start setup unless you go with a Aurora thunder fiber laser

[@billzowak5509]

You can buy a power strip that will only turn on other outlets on it if the item plugged into a specific oulet on it is turned on. But the fan would have to be able to run from a no power to power change. So if the laser is plugged into the main outlet, when it is powered on the other outlet only then becomes live. If you dont want to run the laser off a power strip then just plug in something else that gets turned on when you use your laser, light a lamp, or overhead light, and that being turned on will activate your fan.

[@ShortBetter]

It's been 9 month, did you buy MOPA?

[@billb295]

@@ShortBetter yes I did and used it to make deep engraving plates for a mold inserts for cnc milled molds for our product. Engravings we’re about .025 deep and they turned out exactly like i wanted. The machine I bought is from Lasers Only and it is awesome!

[@layneyost7393]

Really enjoyed this video. I have a 60W JPT MOPA on order. How do you make the patch jigs?

[@layneyost7393]

Never mind, I found your jig making video. Thanks again.

[@computercreationz]

Thank you, I really like the patch jigs it save me a huge amount of time and the repeatability is fantastic.

[@jimscott9974]

Thanks for the great video. What are your sources for the green protective window, and the accordion material to fill in above and below the moving laser neck? Thanks

[@computercreationz]

I had the accordion material from a cheap cabinet I wrecked out. the green acrylic came from lasersafety.com

[@jimscott9974]

@@computercreationzThank you.

[@chrishorob]

Great video. What is that display in your cabinet? It shows up at the 12 minute mark in the upper right hand corner of the cabinet.

[@computercreationz]

That is my z switch so I can move my motorized z up and down. I have a motorized 700mm tower to accommodate the 300mm lens.

[@chrishorob]

@@computercreationz thanks! What brand is your laser? I have a cloudray and am looking for a motorized z upgrade to add a cabinet.

[@michaelgee7123]

Great video. Do you have a link for your cabinet

[@computercreationz]

I made that cabinet with 2020 extruded alum off of etsy

[@joshuas5504]

I do a lot of patches as well, but never a 600 patch order. Do you have any particular suggestions for landing those types of orders? How did you get it so that your average order was 600+?

[@computercreationz]

Company’s that sell their own merch is a big part of that. Being flexible and ready to pivot when your clients do is the only way to stay In this game. Larger orders like this has its drawbacks as well. You have to figure out the absolute best and fastest way to do things.

[@GarlandFarms]

Thumbed-up. Subscribed. Bell rang. Do you know if there would be a benefit to a 100W over a 60W within the parameters of your business? Any cons to a 100W compared to a 60W?

[@computercreationz]

I’ve owned both and the 100 watt is the way to go in my opinion. Thanks for watching subbing . I appreciate it

[@shellyjorgensen2441]

Also what is the coldest temperature you can leave it in. I live in Minnesota so right now I bring the laser heads in the house and only put them on the laser when I'm going to use it and then I bring the head in on my D1 20w

[@computercreationz]

there heavy enough you won’t want to do that. condition space is best.

[@shellyjorgensen2441]

@@computercreationz But do you know how cold it can be that won't hurt it. I can't heat my garage the whole winter. This is why I can't have a CO2 laser. Thanks for your help on this.

[@computercreationz]

@@shellyjorgensen2441 I don’t know the answer to that it would be best to talk to the manufacturer

[@minnesotamaker1846]

Where did you get the green acrylic for the door window?

[@computercreationz]

lasersafetyindustries.com

[@SparkStudio123]

@@computercreationz Do you have a plan for cabinet? (Sizes and materials?) Thanks for an interesting video and info!

[@shellyjorgensen2441]

I posted on the wrong KZbin video. Can you tell me if the Fiber Laser runs on a regular plug in or does it require a 220

[@computercreationz]

regular 110 volt plug take less than a hair dryer

[@mikekleinschmidt3671]

You have the link to where you got that cabinet?

[@Hillbillyable1]

He bought the parts and built it. Is a nice design to maybe reproduce for interested people though.

[@computercreationz]

I made it out of 2020 aluminum rails off of amazon

[@jessicabolesta7330]

Do you have a link where you got your x y table

[@computercreationz]

laserableitems.com/store/xyz-table

[@Golfexpertbelieveme]

But don’t you save time with a C02 cause you don’t have to sit there and change them out?

[@computercreationz]

I’m doing 8or nine at a time in the fiber with a jig so no. Quality output with the fiber is crisper as well.

[@Golfexpertbelieveme]

@@computercreationz oh ok. I thought it was like a one patch at a time thing. Good to know. Would love to see a video on it. I’m very newb to fiber. Just got my thunder 51/100 which is my first real machine

[@Golfexpertbelieveme]

Where do we look at different ones with pricing

[@computercreationz]

All that info is in the description.

[@Golfexpertbelieveme]

@@computercreationz lol ok.

[@georgielang7627]

DId you get the E or the M series?

[@computercreationz]

I believe the e series. The higher quality of the two if I’m not mistaken

[@georgielang7627]

@@computercreationz The E I am finding out is the lesser quality. Thats why I was asking. Wondering if the E series is acceptable.

[@HaotianLaser]

@@computercreationz You have M version, not E version