7" Premium Instrument Gauge Cluster Upgrade Swap RAM 1500 2500 3500

7" Premium Instrument Gauge Cluster Upgrade Swap RAM 1500 2500 3500 we show how we installed this upgraded gauge cluster in this tradesman express pickup truck to a 7 inch screen gauge cluster from the higher trim level trucks like big horn sport laramie and limited trucks
Click HERE for alfaOBD app
amzn.to/3Mw21iy
Click HERE for the OBDLink MX+ OBD2 Bluetooth Scanner for iPhone, Android, and Windows to connect to Alfaobd
amzn.to/3mqdvcV
Click HERE for the usb cable OBDlink if you want to do a wired connection to your PC
amzn.to/3mxvSg2
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com/shop/boostedmo...
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#Ramtrucks #ram1500 #ram2500 #ram3500 #ram

[@BoostedMotorsports]

Special thanks again to Alex (REAVER) for sending the cluster! Click HERE for alfaOBD app amzn.to/3Mw21iy Click HERE for the OBDLink MX+ OBD2 Bluetooth Scanner for iPhone, Android, and Windows to connect to Alfaobd amzn.to/3mqdvcV Click HERE for the usb cable OBDlink if you want to do a wired connection to your PC amzn.to/3mxvSg2

[@ReEvoluion]

I had the same engine hours issue on my 17 Express, I tried both Android and Windows with the OBDLink MX+ but it wouldn't work. I found a post somewhere that suggested it was an issue with Bluetooth so I tried again using a OBDLink EX cable (usb) and Windows which worked without any problems.

[@richcruz8924]

@@ReEvoluionthanks for sharing your experience and update. I just got my Premium cluster today and will do the install upon receiving the OBDLink MX+ ODB2 and the wired USB cable. Thanks again

[@juanitojgarcia3416]

Hey so I just recently purchased the one link Mx Bluetooth, and can’t seem to change the miles. Do I need to purchase Alfa obd or is it free?

[@RudeMoparDude]

Another great video! So much 🔥🔥🔥content ! The premium cluster sure makes that new dash look 💯🤘🏼🔧

[@Jeremy-if1wl]

Dig the vids man, very useful and helpful!

[@mikemcdaniel2570]

Never mind I found it. Keep up the great work. Your videos are very informative.

[@justinscherrman2263]

Loving this project

[@henryg683]

John this was way above my patience level I give you a lot of credit for having it to get it done!!!!! Imagine how many projects are in limbo because these things weren’t able to get figured out!!!! See you in the next video!!!

[@BoostedMotorsports]

Thanks Henry! It’s a fun puzzle for sure

[@michaelvo6350]

Very informative vid, John. Please keep us posted on the fix for engine hours.

[@Unfinished-Business24]

Dude love your content seems like all other channel aren't posting as much anymore please don't follow suit I look forward to your content I've told lots of other ram guys about your channel there pumped for the hellcat build I loved the first hellkota build thank you for great info bro!!

[@American_Muscle_Preservation]

Awesome video man, as always. Can’t wait to see the Hellcat seats in her

[@dannyandersen1762]

got one for my 13 RAM 1500 and installed with alfa. Works great only thing is my oil life is incorrect but oh well close enough to my oil change time it shouldnt matter too much.

[@hunterdan2002]

Fyi to get lifetime hours you have to add the idle and drive hours together. The cluster takes the difference between the 2 to give drive hours. Fwiw, I've made changes to the bcm for lighting that took hours to take effect, so even if it says it took and initially doesn't, it may show up several hours later after a sleep cycle.

[@VaughanGuitars]

I just replaced my cluster for the upgraded one on my 2018 Ram Midnight Express. It took all my hours and no problems programming. I also used the OBD+ MX

[@ronedmunds8993]

The upgrade for my dash gage cluster went great! Thanks for the tutorial. I ran it on my Samsung Galaxy Fold 4 in tablet mode. It didn't behave at first so I installed the supporting app for the plugin ODB reader/transmitter which allowed me to install a firmware update. After that, there were no problems updating the Mileage, Idol, and Drive engine hours. 👍

[@BigDavesReviews]

Are you referring to the MX+ software if using the MX+ OBD tool? Just an example, if using a different OBD reader/ tool of course get their most up to date software right?

[@nandoscustomdiecast368]

I need this in my life😊

[@crzypaiute]

I know this is an old video, but you are still helping your Ram brotheren. You are very detailed and that makes all the difference. I was able to do this upgrade no problems thanks to you, thanks brother! It is appreciated

[@BoostedMotorsports]

Glad to help

[@MM_in_Havasu]

Pretty cool stuff, man! Truck is looking good! Thanks for the informative video!

[@BoostedMotorsports]

Thanks Mark! Should really take shape in the next week or so with the seats and center console 💪

[@Justthemow]

@@BoostedMotorsports what year was the truck to begin with I have a 2012 could I do this upgrade I have a friend with a snap on scanner tool

[@ZeroSins]

I've always wondered if you could add paddle shifters in as well and what transmissions are needed. Nice build so far man.

[@yoloxxjd1]

During this build I like how you turned a regular 1500 into a sport trim model

[@BoostedMotorsports]

💪

[@richcruz8924]

Hey fellas.. I was able to upgrade my Cluster Gauge on my 2015 RAM 1500 SLT 3.6 to the 7" Premium, I was lucky to get for $200 from a local in FL. I followed the steps that John had mentioned in his video/Post - But, I paid and downloaded the AlfaODB software and license for the PC version on WINDOWS. Since I purchased both the ODBLink MX+ (Bluetooth)and the ODBLinkEX which is for PC or Android wired. This worked on my 1st Run, with no caveats or issues. I did however use 6 digits, like 000259 for Idle hours, although it's actually 259 - did the same for Engine Hours as well - worked fine. Yeah, it's a bit costly for paying for the Bluetooth option and the USB, but to me it's all worth it. A piece of mind, when doing serious or more risky flash to the ECU. I also, do the same for my German/BMWs using MHD and and ProTools. I Love my new Cluster - wow what a difference. Thanks for sharing John.. Keep doing doing what you're doing 👊

[@djmjr77]

Just an FYI , I have been using the Vgate vLinker MC+ Bluetooth OBD2 4.0 .. and don't seem to have any issues with alfaobd.. its way cheaper than the OBDLink Mx+ (since it got popular) 55.00 as of now

[@jimmorwood9715]

Nice to know

[@reaver357]

Let’s goooooooo My total hours showed up after the system “slept” for awhile. It just popped up one day after my rebuild and swap.

[@BoostedMotorsports]

Good to know! I can’t get the idle or engine running hours to take. Alfa says it completes the procedure but it doesn’t change.

[@reaver357]

@@BoostedMotorsports if not there after a sleep I can only suggest this…close the doors and start with idle hours…app might say procedure failed but if you check the ipc it should flash and ding with the correct info. Then, go get lunch or something. Do lifetime hours next and should get same results. As for total hours, they just popped up. I didn’t do a vin write or rewrite and that could be the difference.

[@jeffersondavis6699]

@@reaver357 my hours won’t seem to take. so you think if i let it sleep for a while it’ll pop up soon? would disconnecting the battery help it take?

[@kylebarnard4042]

Man you guys are the real deal and next level! I've got a 2014 ram Laramie from Canada that I'm trying to enable apps on the 8.4 uconnect, any pointers?

[@thebestman12na98]

I love your videos, I have a 2021 Ram 1500 classic...how would I go about adding the GPS as it did not come with that option...or did you make a video and I am just not looking...lol...

[@johnsn10]

Will you also be doing repair videos with the ram again? Love those

[@cocoastclair]

The whole truck looks great. Do you work on trucks as a side hustle?

[@dawidrosinski5107]

Hey. So you change only cluster all other stuff was left? All stuff working on the same BCM ECM all old CAN system?

[@arod4709]

Have you ever done the rear camera?? Mine is not working and was wondering if you habe a video for it

[@tgtshirts1]

Cool video. It is a bit scary that someone can change mileage , but yeah cool. Thumbs UP

[@BoostedMotorsports]

Can’t fool the DMV or the other modules in the vehicle that are also recording mileage 🙂

[@mattlumbley615]

can you replace the front clear lens of the gauge cluster? mine has a crack

[@TheTrip2600]

@boostedmotorsports hey i have a 2012 ram and i want to do a custom interior not just a fash swap do you know if thst center section of dash is removable? That tan section on the top

[@Bobstea]

Is there a way to add or remove the short video when the cluster boots on?

[@abdullakira5748]

Would this work for my 2020 ram bighorn? Trying to upgrade to a used digital cluster but I need the new odometer changed

[@jimmypalmer5422]

About the engine and idle hours. You can edit the total and the idle. Engine hours is total minus idle. Add the two numbers together and input that number as the engine hours, this will get the hours and total correct.

[@subbassick]

Could you plug and play a 2012 model to 2013 cluster?

[@davidgonzales8395]

Do you have to program it every time you instal? I have 89k wasn’t sure I wanna do this but not sure if I change out with the new one like this with mess with everything

[@mariohenderson1904]

Question I have a 2009 standard basic instrument panel But would like to install this 7 inch newer one. Would it work on the 2009 I have two wire harnesses in The back of mine

[@Berber210]

Can you do the same on 2018 ford f150 with this device?

[@freakshow3502]

where were you able to find all these replacement parts?

[@johnstrawser420]

So there is a big difference between 2012 and 2013? This cluster wouldn't work in a 2012? I'm changing out my interior in my 2 door 2012 with the 5.7 but it's a ST I think. I'm putting bucket seats and center console from a 2014 4 door. Hopefully everything hooks up.

[@lanewhite9365]

Whats the part # for the cluster trim piece. Just did a limted dash swap on mine and had the same problem

[@robertbebber7923]

Can I upgrade my 2011 rams gauge cluster to this newer cluster?

[@cardsin2005]

John, I had the same issue with the 7" EVIC swap in my 2014 Express. If you figure out how to fix it please make an update video. Also did you notice if your new EVIC has dimmer/less white hue to the backlight around the speedo and tachometer? I posted about it on ramforum and no one had seen that before. Awesome content as always. Can't wait for the console install.

[@ReEvoluion]

I had the same issue on my 17 Express tried both Android and Windows with the OBDLink MX+ but it wouldn't work. I found a post somewhere that suggested it was an issue with Bluetooth so I tried again using a OBDLink EX cable (usb) and Windows which worked without any problems.

[@HeavyLS]

Could you do this kind thing of swap to an 06 ram?

[@aplaskett89]

Would it work for a 2012 ram 1500 Laramie

[@user-rn2xt7qi6x]

The backlight on my cluster went out so I don't know my milage. Is there a way to pull it from the OBDLink?

[@hugo1655]

will that cluster work on a 2010 dodge ram SLT

[@willmatic84]

Looks better than the standard one 😏👌🏽#BSTEDMTRSPRTS

[@BoostedMotorsports]

For sure!!!

[@maxcox6019]

Can you install this in a 2500 HD if you don't change the radio out?

[@chinito20fam]

Sick what type of truck am I able to replace if I want leather? It's a 2003 dodge ram in a quad cab.. for right now 1000 dollar headlights.. just got some leather seats on its way!! From a 2015 all black... Would love to get leather panels. And upgrade the doors.. all black. Is it possible? Doing starlight in black suede. Upgradeing speakers. Rock lights 6 inch lift. Keeping the 35. Upgrading brakes and pads and rotors.. custom headlights and rear. LEDs reverse. Steel bumper and front.. and seeing how I can upgrade the stereo with touchscreen. Having android auto.. and USB

[@matrixclark981]

Will this work on a 2012 ram 1500 express ? 2012 cluster doesn’t even have a screen definitely want to upgrade

[@suzy010510]

I have a 4th gen Ram 2014 sport. I’m having issues on my dash. My dash seems to be flickering. Is it an easy fix ?

[@colestreit1500]

Does it matter if you have a 2014 ram and buy a 2015 cluster?

[@sixtosmith8712]

Hi Alex .you think it’s possible Give me the link where are you bay the speedometer I want to upgrade in my truck Dodge Ram 1500 2013 But I don’t know where I can find the right one exactly like yours .have a good afternoon thank you . I appreciate your help

[@martinp.cadillackid3408]

Can you change the lights

[@kinghomeservicesllc6901]

Will it work on a 2011 Laramie 3500 megacap

[@nandoscustomdiecast368]

Will the truck still turn on and drive if you don't correct the miles?

[@richardrhoads9088]

Does anyone know if it's possible to replace just the clear plastic front? Mine is cracked

[@CarsTrucksWhatever]

what was the mileage on the hellcat engine

[@JohnSmith-ot9sc]

Does your pcm need to be unlocked for this to work?

[@lchase7858]

How do I obtain the information if the cluster I'm replacing is dead and not displaying truck info. (Mileage, odometer, engine hours, etc).

[@maxcox6019]

Can you change this cluster without having the big touch screen radio?

[@ttorrestho]

Does anyone know if this will work on a 2012? I know some parts are specific to the 2011 and 2012 years.

[@jmannthethird]

what years will this cluster fit in?

[@ronaldgaudet9290]

what would it take to program one for me i think i live up the coast from you

[@29champracer]

Which year is your Ram? I am looking if it could fit my 2009-2010 Ram 1500 upgrade. Thanks!

[@bengalsteve]

I would love to do this to my 2012 Big Horn. Is this possible with that vehicle?

[@chrischapman117]

I’ve been searching for answers and I can’t find it. What year is this truck?

[@eltigere8585]

Can you change the mileage with a snap-on computer?

[@kenmartin7175]

Will that cluster work on a 2011 Laramie?

[@wolffmanjack4743]

Awesome tutorial. I would have been second guessing myself with this program if you hadn’t made this. Also not sure what the repercussions are if you don’t change the vin. But mine personally said procedure failed. I started googling and than suddenly it popped up with the usual message that it was successful and let it rest for several minutes. So I don’t know if it went through 🤷‍♂️

[@DasCavi]

So did it work.

[@ericcruz4364]

Where did you get the premium cluster?

[@redwood6737]

This is super cool. We have the rare 2006 Ram 1500 Laramie mega cab. For anyone who’s into specs this particular truck came with a 5200 pound front end and a almost three-quarter ton rear end on a 1500. It also sits higher in stock tram than other 1500s. They did this mega cab on the 1500 for two years. Then I figure they assumed they were building basically a 2500 or 3500 mega cab so I do it on the 1500s. After 2007 mega cabs only came in 2530 500 trims. I have the 5 inch screen in the dash which has since gone blank. Thought about putting an aftermarket unit in there and priced some really cool ones at $1500. Even thought of taping an iPad to the dash to make it like a super cool Tesla. Anybody with an idea on how I can restore this stereo GPS head unit to something even better than what was Stock in the year 2006. Thanks for all you guys are doing and sharing

[@jessiealfonso2997]

Hey guys i need help on this please! So I bought the same as he did but it keeps telling me procedure failed, what do I do now

[@MichaelBill-el2kz]

Does Alpha OBD work with iPhone?

[@filipjambres6994]

Hi , i have an issue, i did everything like on the video but it keeps on showing me procedure failed msg after 30 sec waiting time and pressing ok for odometer change

[@mikemcdaniel2570]

I didn't see where you could pick up the alpha OBD where can you get one and how much do they cost also did you take engineering in school . Love your channel

[@BoostedMotorsports]

Top comment and description

[@IEatDirt-jy7iv]

Anyone know if i can install the premium cluster in a 2012 ram??? Forums say its not possible but they were all back in 2015-18. Not sure if anyone has figured anything out yet

[@PugJudge]

Will this work on a 2011 ram ?

[@DaisyGarcia-mc7tk]

What if the screen isn’t turning on, is there a way to fix that??

[@JavierHernandez-qf7nm]

Can i swap my 2010 cluster to a 2014 ? I have a laramie edition

[@rf4c1018]

How hard is it to replace 4.7 with 5.7 Hemi?

[@david14fan]

If it’s a cluster before 15 you’ll run into issues I have a 17 cluster in mines and had no issues programming but what I can recommend ppl just wait 5 minutes in between changes and they always get it or they just keep doing the same process 5 times. Edit: pre 2014 clusters will only have the ram head 13-14 are the years to avoid anyway if you have TPMS if you manage to find a 2014 cluster with TPMS you are good

[@HTX_Epicenter]

You think I can put the same cluster from the video to my truck it's a 2011 ram 1500 and It has the simple cluster the one that does not have a screen, but do you think I can add this cluster without problems? And can I add a cluster for a 2500 or it needs to be for 1500 for it to work on my truck?

[@jumboslash]

Where could I get one of does?

[@angelgrauvelazquez2671]

Hi I have a 2010 Ram 2500 diesel , Can I do this Upgrade??

[@djjuniorquijano3959]

Bro which state are you located ??

[@mariof3823]

I have a rebel guage cluster but nothing to put it on hahaha

[@matthewcampisi7359]

Has anyone had an issue where the mileage won’t adjust with Alfaobd. It’s not working for me.

[@joshuadaniely9737]

I take it that that particular cluster has to be bought from eBay or something? I have a 2014 1500 tradesman and I’ve watched your videos for a long time for mod ideas. I’ve always wanted to change my cluster, so seeing you do it, is refreshing.

[@reaver357]

eBay, offer up, fb market place or scrap yards. Boosted has another video where he links all the places he gets stuff. Craigslist is good place to check also…don’t just look for cluster though, find the salvage or parts only listings and ask the seller. I found that cluster when looking for tailgate and asked if they had other parts. My .02c though

[@BoostedMotorsports]

Reaver hooked me up with this one but like he said those are all good places to shop for one ☝️

[@joshuadaniely9737]

@@reaver357 definitely appreciate your suggestion. I’ll definitely get to hunting for them. The current cluster is just boring lol. Thank you again.

[@halecj1]

My 2013 Ram 1500 still registers 0 idle/engine hours with over 90k miles (same 7" cluster).

[@325spoon]

Off topic idea: Can you convert a 4th gen to mimic the look of the warlock? Gives it that sporty off road look even though it can be a grocery getter

[@hunterdan2002]

You can, just need the bumper, grille, lights and some other stuff.

[@billyclaysr.5785]

Would of been nice if you added years💯?

[@mauriciobsr.2430]

Omg. Wish I could do this but I have a 2012😢

[@robinronald3054]

This doesn’t work anymore, bought a new cluster for my 2019 dodge ram classic, bought the obd2 dongle and bought the app to my surprise it just always says “procedure failed” glad I spent my money on that

[@johnsineni]

I am wondering if the PCM has that data in it as well, meaning mileage and run times. If that is the case I wonder why the dash isn't a slave of the PCM and just would read it from the PCM. I know you have been in HP tuners like to one of these PCMs and have seen some of the info in there, did you see mileage and run times?

[@BoostedMotorsports]

It does wheel speed sensors log as well in another module 😏 👍

[@stephentaylor9988]

Maybe I missed it being said; but if it's a easy as alpha obd to change your mileage on the cluster. That must be a used vehicle dealers dream?

[@reaver357]

Technically, yes and no. If you’re swapping to do an upgrade, as seen in this video, no harm at all…as the original miles and info were used. However, if you choose to “roll back” miles… service records, vin checks, title and registration verification will raise a flag and if your numbers don’t add up at time of sale…you could be f#%cked. It’s a federal offense…ask me how I know 🤣🤣

[@manuel141]

It’s there a way to installed to a 2012 Ram

[@Devilspocket2002]

Wouldn't the life time engine hours be the sum of idle and drive? seems there needs to be a drive hours change. I dont really know my truck already has the 7 inch cluster just spitballing at this point. maybe its causing a conflict with the ecm?

[@hunterdan2002]

You're 100% correct

[@BoostedMotorsports]

Yeah you might be right on adding the two together for the lifetime but either way it wouldn’t take the programming. Another KZbinr was able to input arbitrary numbers and it saved on his. I have something else I’m going to try today I’ll post a follow up video if it works

[@hunterdan2002]

@@BoostedMotorsports I've had some issues trying to write the hours into a buddy's truck. Sometimes it seemed like the order of operations made a difference, (lifetime first, then idle, but it does seem to be hit and miss. Even when trying to write the hours to the old base cluster.

[@nyenergytrader]

I have a question about some work you did, how can I reach you?

[@miker4990]

Hey John great video, I'm curious will the 7 inch cluster work on 2010 dodge ram or is it a totally different electronic system?

[@BoostedMotorsports]

09-12 is different than 13+ trucks. The “brain” on the 12 and older stuff is the fuse box where as the 13+ trucks have a BCM and a bunch of computers that talk to each other via canbus signals

[@Spoofaged]

Pretty sure 9-12 are stuck with the 3.5" gauge cluster from that era. I tried to find an upgrade for mine but already had the "premium" cluster which really isn't all that premium

[@miker4990]

Thanks John, would have been nice to install that cluster is sweet

[@Tomas22106]

@@BoostedMotorsports I have a 2012 dodge ram, I already purchased the evic cluster for the truck, what steps are next to get things to work

[@Dannyhrnndz]

@@Tomas22106did it work for you? or did you have to refund it?