70+ MPH - Sotion Powered Razor Electric Dirt Bike! Bolt On Kit - 70+ MPH

[@VoltronWatts]

Wanna build an electric mini bike of your own, head over to Voltronwatts.com 🚀

[@markgonzalez4070]

Keep these videos rolling!!! Me and kids can’t get enough of them

[@VoltronWatts]

I appreciate you and your families support Mark! 👊

[@asian_raisin]

That is wild! I can't believe how fast that little bike is going 😆

[@VoltronWatts]

These electric bikes are super fun!

[@SCJcontent]

So darn cool, I love this Sotion series

[@VoltronWatts]

Sotion has been releasing some bangers for sure!

[@SINcityBigLOU]

Brother! 💪 you look stronger in person! 😮😊 702 ❤

[@VoltronWatts]

Haha! I appreciate you!

[@wattleyracing]

Also are you using the 96680 just cause you plan on going with a 96v battery? The 72680 and 96680 are the same price so would it just be better to grab the bigger controller?

[@VoltronWatts]

I got the 96v controller because I planned to run a 96v battery at some point. And I did get a 96v battery and I got a 961800HR controller instead 😂

[@wattleyracing]

@@VoltronWatts makes sense, I really wanna do a 96v setup but not sure yet lol

[@QWERTY-zy5zt]

What front wheel are you using? I am getting that swingarm but I do not want my front tire to be too small and I need my brake rotor to fit.

[@VoltronWatts]

amzn.to/3NEzDxZ

[@Turbskiiii]

Just ordered on a few days ago after watching this! Do you know the length of the phase extensions? Was thinking about picking about one of the surron phase extensions, but I'm not sure if they would be long enough.

[@VoltronWatts]

Hey man, thanks for watching! I don’t know the exact length. I’ve made my own phase extensions in the past and cut them the exact length 👌

[@nathanwill1880]

New to this and I want to build one but I can’t decide on which setup. Sotion & Fardriver or EC4P & Noisy Cricket. Which would you recommend?

[@VoltronWatts]

You can’t go wrong with either man 👌

[@iii_diesel_iii8134]

Hi man just a question would the nd72450 work with the sotion fw01 motor thanks

[@VoltronWatts]

Totally!

[@BoltsNVolts]

Great informative content sir! Glad to see you all geared up brother!

[@VoltronWatts]

Thanks Andrew! Need to find a gear sponsor for the channel to get a set of leathers!💪

[@MattPresby]

So what would you have to modify to get the fw01 kit on razor pro?

[@VoltronWatts]

The swing arm

[@Mattoutdoors.]

What controller and motor will you do for a 48v budget set up?

[@VoltronWatts]

Go FASTER for CHEAP! 48 Volt Budget Build! Beginners Guide To Building A Modified Razor MX650, SX500 kzbin.info/www/bejne/r3m4pJh_mq2brKc

[@raderws]

Dude your killing me these razor mods are breaking me lol fantastic video by the way sorry you jacked up your ride.

[@VoltronWatts]

Live and learn. Came out with minimal damage and got back on the horse! Thank you for watching! 🤜🤛

[@shotsofvaca]

THIS HAS ME TOOO EXCITED TO SEE THE 96V SETUP!!!!! Great video

[@VoltronWatts]

Hell yea brother! Thanks for watching!🍻

[@brettwalker4950]

Is it longer than, how much longer is that swing arm vs stock?

[@VoltronWatts]

Prolly 5” I’d guess

[@brettwalker4950]

@@VoltronWatts nice! Thanks, VDub! Seems like I’m leaning towards that setup and ready to get it moving. 🤤

[@wattleyracing]

Does this motor get hot pretty quickly or nah

[@VoltronWatts]

Nope

[@oem_spec]

Tempting 😈 imo they should have an option for welded freewheel on this kit. Tried the welded freewheel on my 76v ec4p & noisy cricket setup & man what a game changer, smoothness feels like a surron & i gotta remind myself not to beat on the throttle too much lol

[@VoltronWatts]

I think the torque on this motor would destroy a freewheel.

[@oem_spec]

@@VoltronWatts big facts! 🤙🏽

[@VoltronWatts]

💪

[@tranht1]

How did the 72v 40ah fit in the bike? I called Amorge and they said the dimension is 6”x9”x10”. Seems too big

[@VoltronWatts]

It fits 🤷🤣

[@VoltronWatts]

I will say tho, mine does not have the metal case around it. Adding the metal case does add some dimension

[@anthonymoy4471]

What cells are in that amorge battery? What bms did you go with ?

[@VoltronWatts]

2170 lishen and ANT BMS

[@anthonymoy4471]

@@VoltronWatts how's the voltage sag on the 2170la lishen? I'm debating those or samsung 50g cell... from amorge for my ebox 2.0 how much range do you get out of the amorge battery

[@Bassin07Si]

I'd recommend some kind of steering damper for future top speed runs just to be safe. You got balls of steel going almost 80 on a razor.. lol

[@VoltronWatts]

Hahah! Steering dampener is in the works 💪

[@MattPresby]

Can you do a build with razor pro and the sotion fw01swing arm kit upgraded controller and 96 volt battery see if you can pull 80s 90s that would be cool to see !

[@VoltronWatts]

That’s a huge request! 😂

[@Nouri_TV]

would the fw01 work with a fardriver 72450?

[@VoltronWatts]

Yup!

[@Jonvrooms]

Just got mine hooked up with the eforce jetpack controller thing is a beast .

[@VoltronWatts]

I’ve been wanting to get my hands on one of those controllers!

[@Watts_garage]

It’s so small

[@VoltronWatts]

Still like it?

[@Watts_garage]

yea the fardrivers are sometimes to big with all the new 6g battery wires hard to tuck those away @@VoltronWatts

[@VoltronWatts]

@Watts_garage agreed

[@MattPresby]

Will the fw01 kit fit on razor pro??

[@VoltronWatts]

No. Not without modification. The FW11 will tho 🫡

[@ebRyder]

Can you suggest a source for the phase wire extensions?

[@VoltronWatts]

I made my own with 4g copper phase wire extensions.

[@ebRyder]

So 4awg stranded copper wire and 4awg lugs?

[@Aidenononewheel]

Do you know if the TruMoto controller would work?

[@VoltronWatts]

Sure will. TruMoto is a VESC controller so, the TruMoto app might not be the move but there are VESC apps that will allow you to use the controller with different motors. However, I think if you tune outside the TruMoto app and use a 3rd party tuning solution you may void your E&C warranty

[@Y-U-MAD-4-BO]

I need this in my life!! i wish they would make a upgraded motor for the fist gen mototec. thanks for the review

[@VoltronWatts]

I think there are some great motors for the bike. I think Sotion makes an FW11 version that will fit your bike. 🍻

[@Y-U-MAD-4-BO]

@@VoltronWatts Awesome ,Thanks man!! I'm gonna have to look into the fw11 for my 48v mototec. waiting on my 72v to come in and gonna push the stock motor for a little while. Love watching your videos and learning these bikes with you in these e-bike groups. keep em comin!!

[@VoltronWatts]

100% will! Keep building man 💪

[@DescartesRenegade]

Lightning rod's big block XL motor fits with a little modification. It's rated at 13kw.

[@VoltronWatts]

@DescartesRenegade I’ve never tried out a LR motor. Would like to tho.

[@Aidenononewheel]

Can you make a video on how you put the controller and motor connection on?

[@VoltronWatts]

How to extend the phase wires?

[@ebRyder]

Have you come up with a kickstand solution for this yet?

[@VoltronWatts]

Nope. Havnt really looked into it honestly

[@mikestrain7791]

It’s called whisky throttle haha I didn’t know that ya I done that before just kept trying to grab that throttle side to get ahold of the bike it’s pretty funny

[@VoltronWatts]

lol! I had control for a second and if you hear the video you hear it rev up again and that’s where it sent itself into the ditch 🚀

[@jeffnagy2032]

What jacket is that? ❤

[@VoltronWatts]

Triumph branded jacket 🤙

[@69Savage.]

can you do this a tutiio? we are looking up to you big bro. keep it up!!!

[@VoltronWatts]

With enough design for sire! Out of the box, it’s not available… yet 😂

[@fortnite123-t8w]

Should I get the 650 or the 500 I’m 5’1

[@VoltronWatts]

They are about the same dimensions really. Get the one you like the looks of! 🫡

[@imwiththebusiness]

i fucking love “grey” area toys. gotta get myself one of these. dont think ill ever go that fast but i love having the choice lol

[@VoltronWatts]

Hell yea brother! Never heard the term “grey area toys” but I love it 💜

[@ryanbroesche1711]

Yea mon sending it careful out there brother

[@VoltronWatts]

Hell yes boss!

[@TreYay83]

Looks like the shock mount revision will hit the spring on that strut

[@VoltronWatts]

No telling till it’s actually done. They may have even changed the design after I was provided the revised picture.

[@DoubleOTEN]

You the champ !!!!💪🏽🔥🔥🔥🔥

[@VoltronWatts]

Hahaha! Thanks boss 👊

[@00TreadStone]

great video bro!! thanks for the awesome content!

[@VoltronWatts]

My please boss! Thanks for watching and commenting 🤜🤛

[@ebRyder]

Hall or Encoder motor?

[@VoltronWatts]

Hall

[@PizzaCologne3]

looks like my next purchase

[@VoltronWatts]

You’re not ready 😂 full send!!🚀

[@ebRyder]

Update: It comes with a 428 chain now...

[@VoltronWatts]

Thank you for the update! 👊

[@DescartesRenegade]

For ~850, this kit is a steal. A custom swingarm would already be 450+. 12" wheel kit is ~100. The only problem is the size of my balls. Theyre not big enough to keep the front end down when pushed to the limits

[@VoltronWatts]

Haha! Just because you have the power doesn’t mean you gotta use it all. It’s a great value

[@kingk7613]

Kraaazy 🔥🔥🔥🔥

[@VoltronWatts]

Great set up!

[@jojojeff1366]

how many watts?

[@VoltronWatts]

Right at 22,000

[@xpndblhero5170]

I want to do this... 😮❤❤

[@VoltronWatts]

No reason not to!🚀

[@xpndblhero5170]

@@VoltronWatts - The cost is one thing holding me back.... The Mrs thinking I'm going to die riding something like this is another. 😅 😂

[@lutherchastain9880]

looks sweet

[@VoltronWatts]

Thanks Luther! 🤙

[@AngelVazquez-l1g]

❤️‍🔥❤️‍🔥

[@VoltronWatts]

🫡🚀

[@anthonymoy4471]

Faster than a grom should have been the title

[@VoltronWatts]

That’s a great point!

[@PatOutdoors]

This build is a little insane..

[@VoltronWatts]

Hahaha! I agree. That’s why I love it 😂 thanks for watching Pat 🤜🤛

[@keithkingsley6503]

Bro looks like Shawn from Life After Lockup

[@VoltronWatts]

Bro, no!

[@tonyquintana0714]

Bad ass !

[@VoltronWatts]

Thanks Tony!

[@DescartesRenegade]

Time to use those low level e-brake connections, lol.

[@VoltronWatts]

😂🚀

[@romeinc]

What if u die who will make mx pro video

[@VoltronWatts]

Hahaha! Great point! No clue 😂

[@shaner.5]

Can we get away from the super minibikes, aka razor, and go with a kx65, rm65, ktm65, pick your favorite flavor. You're a big MAN step up to a kx85 or similar. let's put the toys back on the shelf and get something considered a dirt bike. This is supposed to be for fun riding with your knees spread like... well you can finish that joke is not comfortable. Take that same setup and drop it in an old kx85 frame now you're having fun and there is room for improvement. Taking a razor and replacing everything on it and putting razor stickers on it don't make it a razor. I get it! but let's up the game for us adults. I heard you say once these are not for kids, so let's stop trying to be 80 lbs. children and step up the Challege just one maybe two notches, is it really that much to ask your talking about doing 75 to 90 mph. The cheapest 65 will always beat a razor the cheapest 85 will always beat a 65 a 125 will aways beat an 85 its the hierarchy of life. instead of creating a new platform (redesign a razor) let use what's already been on the market for 25+ years. I am not saying go buy a Stark Varg here, but maybe that would be money better spent for some of ya. If ya want a dirt bike with 80hp well stop playing around, it's called a Stark Varg and it the sexiest bike ever.

[@VoltronWatts]

Thank you for watching and thank you for the feedback 🤜🤛

[@MoneyMakinJay]

Sign me up and take my money 🙌🏼

[@VoltronWatts]

Seriously!

[@joeyb7084]

@@VoltronWatts I’ve seen a electro and co build and it’s way more expensive. Why’s this one cheaper?

[@VoltronWatts]

I don’t have a good answer for you there. I’m 😞 sorry

[@mrludicrous1670]

60 on minibike💀

[@VoltronWatts]

🚀😁

[@blairakana9984]

Certain high speeds on that little bike can kill you and you need to realize that small bike is not made to go 90 mph. Things can happen and failures can happen to the bike.

[@VoltronWatts]

Thanks for watching 🤜🤛

[@ShotTheoryPB]

Thanks dad

[@VoltronWatts]

@ShotTheoryPB Gotch you fam 👊

[@hunterjackson80]

You don’t have to watch lol

[@VoltronWatts]

🩵💜

[@burn1gotbeats]

😎🫡

[@VoltronWatts]

🍻🍻

[@DylanKessler-rm2lx]

Do you have a link for everything?

[@VoltronWatts]

18b524-be.myshopify.com/

[@VoltronWatts]

And E&C forks Discount code for E&C is “Voltron5” 👌

[@DylanKessler-rm2lx]

@VoltronWatts what Controller did you go with? And is the motor on the rim?!?!

[@SkrmodOfficial]

so cool, get it going !!!!!!!!!!!!!!!!

[@VoltronWatts]

Thanks for watching! 🍻