Nice purchase! Those machines have a good reputation for reliability.
@jordangaribay9608 Жыл бұрын
Yea they are really reliable
@Deerrus Жыл бұрын
I’m blown away by your work and craftsmanship. I wish I had your talents!
@jordangaribay9608 Жыл бұрын
Thank You very much!
@danhooper3819 Жыл бұрын
I had a 2005 Yamaha Big Bear as a spare ride, that machine was bullet proof....I would love to come across a deal like this 350.
@gabrielarsenault4175 Жыл бұрын
Nice i bought a 94 for 400$ like 6 years ago realy clean and still going strong
@jordangaribay9608 Жыл бұрын
Nice and yea these quads are super reliable
@Lee-mmg Жыл бұрын
I bought a 1997 BIg Bear 350. It needs some work - so I am going to just do what I can. I've got a new battery (a trickle charger and fast connect - auto shut off), 2 new headlights. New material to cover seat. Oil, oil filter, air filter. Gonna clean up front and back rack and paint. and just go from there. Glad to see this. I think mine had a lot more riding done on it - than this one. But looking forward to seeing how it turns out. Thanks much! clean the whole body - get some shine back. Looks good. good job.
@jordangaribay9608 Жыл бұрын
Appreciate it! Glad to help
@markalan4026 Жыл бұрын
You did a good job cleaning it up too 👍🏻
@jordangaribay9608 Жыл бұрын
Thanks!
@michaelshubr4084 Жыл бұрын
I rebuilt a 2004 Big Bear, and just finished a 86 Moto 4 for my daughter-very good value for used ATV’s, and parts are both cheap and available!
@jordangaribay9608 Жыл бұрын
Nice!
@AquatechnicLive Жыл бұрын
Im working on a project big bear 400, where do you source your parts from? im having a rough time finding what i need
@jordangaribay9608 Жыл бұрын
@@AquatechnicLive go on Ebay pull find everything on there
@michaelshubr4084 Жыл бұрын
@@AquatechnicLive Ebay had most everything I needed to include upper cylinder head and piston, and lower crankcase / transmission. Some parts were Yamaha, and some Chinese knock offs, but my Big Bear and my daughter’s 86 Moto 4 are 100% working order! Would like to find a 90’s Moto 4 350 Big Bear-the early ones had a much heavier frame, and front end with grease zerts on everything.
@davidrussell2032 Жыл бұрын
I just got ahold of a Yamaha big bear 350!. Needs some work though!.
@jordangaribay9608 Жыл бұрын
Nice! they’re good quads.
@soapy3204 Жыл бұрын
Resurrection complete 🎉💎
@jordangaribay9608 Жыл бұрын
Thanks!
@juliusgreen7495 Жыл бұрын
Thanks jordon
@jordangaribay9608 Жыл бұрын
Your welcome
@munchfishing57632 жыл бұрын
amazing vid thanks for the help jordan
@purplehayze420 Жыл бұрын
They sent you a warrior carb
@jordangaribay9608 Жыл бұрын
Yea, I ended up returning it
@tommygunss4576 Жыл бұрын
YES! sweet success! nice job!
@jordangaribay9608 Жыл бұрын
Thanks!
@burtlade1705 Жыл бұрын
Check the pumpkins!
@smorblom Жыл бұрын
Nice job!
@jordangaribay9608 Жыл бұрын
Thanks!
@franklinfalconi3610 Жыл бұрын
Do you still have it? I just got one but cant info on it. Do you have a model number for it for me to look up parts?
@jordangaribay9608 Жыл бұрын
What year is yours I sold the one in the video but I got another one
@franklinfalconi3610 Жыл бұрын
@@jordangaribay9608 i dont have nothing,only the engine number and cant get no info on it.
@franklinjoyce8238 Жыл бұрын
when u put the tires back on the rotation is backwards lol
@jordangaribay9608 Жыл бұрын
Oh yea I didn’t notice haha.
@lonestaroutdoorsman96522 жыл бұрын
Awesome deal
@HectorGarcia-eo1lq2 жыл бұрын
Awesome.
@travharrell1713 Жыл бұрын
Does anybody know where the serial number for the rear diff is on the 1998 big bear 350 4wd? I have ordered the All Balls Racing rear diff seal and bearing kit from Partzilla and it has the wrong bearing. I sent it back and they sent another and it still has the wrong bearing. I talked to someone at All Balls Racing and he says that it is the right bearing. He thinks that the previous owner replaced the rear diff with one from different model. I don't think so because when I bought it, it was only 5-6years old so I don't think it was. I am trying to get in touch with the guy I bought it from but that was 18 years ago. I found on the Yamaha website what the serial number is for the rear diff but not where the serial number is. I can't see, I am going to try to clean it up some more and see if I can find it but any help would be appreciated.
@jordangaribay9608 Жыл бұрын
I don’t sorry, I sold it a while back
@graafinhetbos Жыл бұрын
The tyres are in the wrong direction i think 🤔 i have a timberwolf 250 ,love the old yamaha qoads !
@jordangaribay9608 Жыл бұрын
Yea they probably were, I took them off to paint them. I guess i put them on wrong haha.
@leighco911 ай бұрын
Ran across your video. Where is the battery located? Thanks
@jaapconijn781811 ай бұрын
I havé à 1988 big bear,thé startmotor doesn’t move thé cilinder?
@benpuentes8838 Жыл бұрын
my new carb idles high any suggestions
@jordangaribay9608 Жыл бұрын
Have you tried adjusting the idle or the throttle cable?
@charles-gabrielvanhoutte8502 жыл бұрын
nice
@juliusgreen7495 Жыл бұрын
I have one of these big bear four wheeler does anyone know where I could find a original Japan carburetor please let me know thanks
@jordangaribay9608 Жыл бұрын
You can get a used one in good condition on eBay but they are pricey.
@ukaszukus51398 ай бұрын
Witam to jest śmieszne że macie tak tanie quady 700 dolarów amerykańskich to na złotówki 2700 a u nas chodzą takie po 6, 7 tysięcy i więcej
@RichValentine19722 ай бұрын
Very nice
@project4stroke8762 жыл бұрын
do people not now how to clean a damn carb?!?!?!?!? OEM is the best way to go for one of these machines....
@jordangaribay96082 жыл бұрын
It already had a Chinese one on, I know how to clean them. But buying a whole new carb was cheaper then rebuilding the one it had on and less work. And oem is the best.
@gamepower69.2 жыл бұрын
@@jordangaribay9608agreed but you should enjoy the process of cleaning it and working on it, its satisficing and ez
@oscars63662 жыл бұрын
@@jordangaribay9608 where you buy the carb at bro?
@jordangaribay96082 жыл бұрын
@@oscars6366 I bought it on Ebay
@1991enduro2 жыл бұрын
@@jordangaribay9608 how much
@bluflame4594 Жыл бұрын
bro why would u buy a new carb the old one looks just as good lmao like a light cleaning with some brake cleaner n boom good as new now if ti was all corroded and rusty and seized then yea buy a new one butthe one that was on it looks dam near brand new
@jordangaribay9608 Жыл бұрын
Yea your right, that’s what I ended up doing and I returned the new one I bought
@melvinyosten3776 Жыл бұрын
If you buy a $30. Pos you're better oh rebuilding the old one. Those cheap ones are never jetted right and just are no good. Stick with the factory ones
@jordangaribay9608 Жыл бұрын
@@melvinyosten3776 The one it had on when I bought it was Chinese to but it ran good
@tucut80545 ай бұрын
Was the new carb good aftermarket used or new?
@jordangaribay96085 ай бұрын
New
@tucut80545 ай бұрын
OK@@jordangaribay9608
@juliusgreen7495 Жыл бұрын
Chinese carburetor doesn’t work
@jordangaribay9608 Жыл бұрын
It had one on there already, I ended up using it and it ran great. They don’t really work for 2 strokes though.