Рет қаралды 445
Found it! After much searching I now have a 701 warp 9 kickstand foot that adds back a little length to the kickstand and a lot more stability to the bike.
If you're looking to turn your Husqvarna 701 or KTM 690 enduro, into a fully capable Adventure Motorcycle chances are you will be happier if you lower your Husqvarna 701 at least a little. Adding an aftermarket comfort seat tends to add to the height, and this machine is tall to begin with compared with most adventure bikes. Fortunately thanks to Koubalink and Warp 9 lowering your Husqvarna 701 is actually not very technical, and is a modification that most riders can easily do in the comfort of their own garage.
The only challenge has been that finding a warp 9 kickstand foot has been almost impossible because of the unique round shaped foot at the end of the kickstand.
More info on this and other topics at dualsportgarage.com
Consider supporting this channel by picking up merch at www.dualsportgarage.etsy.com
Thanks for watching!
You can find the kickstand foot here:
amzn.to/3ERQJ74
Round hacksaw blade here:
amzn.to/3RzRhpQ
and you can find the double sided close cell foam rubber tape here:
amzn.to/462jABG
00:00 Introduction
01:03 Check your orientation
02:15 Plan your cut
03:08 Mark your cut
03:24 Tools needed
03:54 Cutting and Shaping
04:26 Test fit
05:15 Install
06:02 the finished product
06:29 Summary
Note: I received no free product and I was not paid to make this video. This channel is subsidized in part by small commissions paid on some, not all, product links. And as an Amazon Associate, I earn from qualifying purchases. So it is helpful and very much appreciated when you use these links to support this channel.