"Make sure to use the right phillips head" Dirtbags, how about shipping quality screws!? I used the correct one and they still stripped like a 99cents store toy 🤨
@ScubaSteveFLA893 жыл бұрын
Yup. That’s what I’m dealing with right now. Screws were shit.
@IMPERIALPIXELMEDIA6 жыл бұрын
Ordered mine online. It arrived damaged/used, with visible scratches and paint stripping off, etc.... And with no build instructions. Will be taking it to get Rhino-Lined after I zinc it. I know the price point for MaxxHaul is buyer friendly, but - there is no excuse for lack of quality control.
@xcrucialx4 жыл бұрын
the screws dont easily go in, I had to make the holes a bit bigger. the instructions are trash, I wasted so much goddamn time getting this put together
@Name-ps9fx3 жыл бұрын
Lots of good tips! Thanks!
@fizzymouse81645 жыл бұрын
Started assembly today and it took an hour to connect the back to the middle section. The middle section was slightly bent and made it very difficult to line up. I will definitely paint it before I attached to the cross bars. The product is scratched and looks like it will rust. I think a textured paint or Flex Seal would do the trick. What do the rest of you think about using Flex Seal to protect the rack?
@StingyOLanigan5 жыл бұрын
How are you finally able to get the center section to line up?
@anthonyfesta7010 Жыл бұрын
Does it fit on-a 2022 Hyundai Kona? They have fixed crossbars on them can’t adjust spacing? There made by OEM model J9F21-ACOO
@joejosepf27093 жыл бұрын
THANKS..great video..do you think it will fit on my Rav 4 , so I can load up my kayak to go fishing in the Gulf of Mexico, here in Florida.???thanks Buddy..how can I buy it.????
@seanduncan962327 күн бұрын
didn't use the oil like we were suppose to in instructions....;.lol thanks
@davidgrizzle96825 ай бұрын
Thanks for this. I got my rack today and there were no instructions with it. This is a life saver!
@dgden84834 жыл бұрын
What's the deal with the rubber washers? I was putting it together today and these rubber washers are a joke...a bunch of them just slipped right off the screw heads as I was tightening the screws and the rest kind of wrap around the screw hanging on a word. Even the screws from the front factory sign plate have exactly the same issue with one washer mostly off. Seriously guys if you think you need the rubber washers use screws with larger heads or include metal washers to go on top of the rubber ones.
@hufcat66702 жыл бұрын
My roof bars are 37” apart at the closest setting. The bar pads are 32” apart at the furthest setting
@jonirice71344 жыл бұрын
One of my lower small bars doesn’t line up with the end piece. The others fit fine. It’s off about a 16th of an inch.
@phoebed44632 жыл бұрын
Got it put together in about 30 minutes. Holes lined up just fine. Had to move the bars on the car but that only added a few more minutes. The video helped. Thanks.
@slacker6977 ай бұрын
What if the crossbars are not adjustable?
@rohitke345 жыл бұрын
The middle bar was not easy to fix to the third one. Already we have to bend it hard to fit
@omahaikk21914 ай бұрын
You have the locking bracket assembly kits installed at the inner rack bars but somehow finished them at outer most bars, which is of course the most stable points. Thanks for your instruction throughout. I wonder if the deflector plate can be painted and personalized with something.
@HUGO-me7js5 жыл бұрын
Gracias por el tutorial buen producto por el valor que tiene vale la pena 👍🏻😁🌟🌟🌟🌟🌟
@MiladJP4 ай бұрын
I can highly recommend to use some lubricant for the rubber parts.
@TracyJordan21223 жыл бұрын
The screws in this video look like way better quality than the ones sent :(. The ones I have from you guys are soft and so if the screw driver slips just once or twice then it starts stripping already. Two of the screws won't even go in all the way no matter how hard I try holding it down from stripping
@claysmith7469 ай бұрын
The screws are bad. Needed WD40 for the rubber sleeves
@rcrdl54735 жыл бұрын
LOL!
@joerobertson70474 жыл бұрын
Do you make extensions? I have this basket, but wish it was longer.
@patrickpatterson37354 жыл бұрын
Joe Robertson I just received my 56x40 rack 😎😎
@livelonger253 жыл бұрын
How much did it cost
@JuliusKashihakumwa Жыл бұрын
where did you purchase yours, link, please
@kellyblackmon2805 Жыл бұрын
Will this work with round bars?
@Kike02263 жыл бұрын
Thank to you now i know that i been doing wrong all this year thank for uploaded this video
@jayson87295 жыл бұрын
this basket rust, you gonna damage your car roof paint
@shari_lynn74543 жыл бұрын
That's why you use the rubber gaskets and some berliner spray!
@robertdavies49852 жыл бұрын
Does WD40 spray work to lubricate the gaskets or do I need a special grease?
@hhazelhoff1363 Жыл бұрын
Use KY jelly and go in the back door. Some force may be required
@rhcp72188 Жыл бұрын
Thanks man
@sonidoxxkandalo2 жыл бұрын
Thanks
@XenaFresh3 жыл бұрын
Thank you for this easy video!
@ocramas5 жыл бұрын
Don't buy this crap, mine is rusted after having rain last week. I have had mine for 3 weeks.
@jess222_5 жыл бұрын
How many inches in height
@MarkCadle4 жыл бұрын
Good job, young man!
@MrCano-oh4vu6 жыл бұрын
How Width is the rack?
@4RT01195 жыл бұрын
39 in
@moonbiter3230 Жыл бұрын
Down voted since he both forgot to mention the greasing the gaskets before installing them & putting on the protective covers at the end. Not a big deal but for a simple install I’d say it should’ve definitely been mentioned.
@shalom90dk4 жыл бұрын
Awesome video! I assembled mine and installed on my toyota 4runner watching this!
@Paul-The-Searchlightpiper4 жыл бұрын
How strong is it Can i put my roof top tent on top of it open it up and sleep two people
@NoBullFitness3 жыл бұрын
Yes. It’ll fit 2 normal sized people or 1 American.
@jrtolber3 жыл бұрын
@@NoBullFitness 😂
@Yachiruxunohana2 жыл бұрын
Worry about the rust? Galvanize it lol
@joejosepf27093 жыл бұрын
Hey Buddy, I want to get this roof rack but was worried about going through a car wash..what’s your opinion and advice??? Thanks for the great video.
@jasminepetal39723 жыл бұрын
Why r u worried about going thru a car wash w this ?
@joejosepf27093 жыл бұрын
@@jasminepetal3972 thanks Jas, I trust your opinion, but will double check with our local car wash place..(I pay $$$ per month for unlimited car washes visits) .thanks again Buddy..I don’t want to start washing my car here at home, just because I have a really cool roof rack..MaxxHaul all the way..from Amazon.com
@joejosepf27093 жыл бұрын
@@jasminepetal3972 I was thinking the car wash brushes might get damaged, or the brushes might damage my new roof rack, as they spin and pass over the roof of my car..while moving through the car wash tunnel..Thanks for responding