72 MM throttle body install

72 MM throttle body install
While part 3 on my turbo is in the works, i figured id share this little install i had done a while ago, so In this video i installed my bigger throttle body.

[@RazoE]

I thought I didn't need the coolant hoses until I took my Speed out here (it's literally snowing this moment), went WOT and the throttle stuck open 😬. I had to stomp on the pedal to unstick it.

[@Luminary_Industries]

It's a design meant for low temp locations, so it prevents that from occurring. Aftermarket are for "racing purposes". Which means, get a daily for the daily haha

[@RazoE]

@@Luminary_Industries it sucks because it's perfect boost weather 😞

[@Luminary_Industries]

@RazoE that it is good sir. 🐌

[@DonJulio6]

Do you know if you need anything else other then a tune if you put this on a Mazdaspeed 6? I have a couple bolts on it vut have a stock block.

[@Luminary_Industries]

If I understood correctly. For install.. you don't need much, but the bolts supplied with the tb. If you're on stock intake manifold, you will need to bypass the coolant hose. As the cs tb will not have that option available anymore. You can also run this without a tune, but cs recommends a tune.

[@DonJulio6]

@@Luminary_Industries thanks for the reply bro

[@Luminary_Industries]

@@DonJulio6 of course. Goodluck!

[@josenhernandez8388]

Hey I’m new to the speed 3 what is some good and easy mods for gen 1

[@Luminary_Industries]

Well, I always recommend an accessport, (Hpfp) high-pressure fuel pump internals. They are both easy. The (hpfp) can be done with ease following a video for reference. The next easy thing to do is a (rmm) rear motor mount to help with wheel hop and some of that torque steer. If you're freshly new to one, I'd recommend doing the usual maintenance to the car and have it on record, such as motor and transmission oil changes, spark plugs and so on. I have a few videos that you may use at your discretion for reference. Any other questions, feel free to ask.

[@AmanecerTropical1]

Y este throttle no lleva conectadas las cooling hose ?

[@Luminary_Industries]

No, esata se quita. Necisitas hacer el bypass.

[@AmanecerTropical1]

@@Luminary_Industries ah ok gracias Gran Jorgiie

[@Luminary_Industries]

@@AmanecerTropical1 de nada amigo!

[@AmanecerTropical1]

Ah Ta Chingon! Jorgiie Este necesita tune ?

[@Luminary_Industries]

No es necesario pero si se puede ser Mas mejor con tune. Perro si serve sin un tune.

[@AmanecerTropical1]

@@Luminary_Industries ah ok Jorgiie Soy yo Franky_ms3_sti 😎

[@Luminary_Industries]

@@AmanecerTropical1 la se whey jaja

[@joseluishernandezcotto9674]

Cuanto vale

[@Luminary_Industries]

Cuesta come 350. Puedes ir al website y mirar, no estoy seguro

[@joseluishernandezcotto9674]

Solo para el motor turbo

[@Luminary_Industries]

Si