72cc HONDA DIO / ELITE ENGINE BUILD PART 1 | AF16 Full Circle Crank, Crank Bearings, Motor Mounts

the Purp Piece getting major upgrades. We drop the engine, split the cases throw in a new Malossi full circle crank, new seals & bearings and much needed motor mount replacement!
#MOPBOYZ GEAR : www.mopboyz.com/
USE CODE "MOPBOYZ" and SAVE MONEY ON SCOOTER PARTS: scooterswapsho...
S23 PIPE NOW AVAILABLE!! :scooterswapsho...
PREVIOUS VIDS: this MADE my HONDA ELITE way FASTER! New Pipe on the 2 Stroke 50cc Scooter!
• this MADE my HONDA ELI...
--- it RUNS! Honda Elite 50cc 2 stroke Wheelie scooter build
• it RUNS! Honda Elite 5...
RIDEOUT : INSANE TWIN ENGINE 2 Stroke Scooter | 100cc Zuma
• INSANE TWIN ENGINE 2 S...
FAST 2 Stroke Scooters take over the City!
• FAST 2 Stroke Scooters...
Chucks FAST 120cc Honda Elite Stroker
• Chucks FAST 120cc Hond...
More on the stroker Scooters:
120cc Stroker Honda Elite is SO FAST! First Rips! 2 stroke
• 120cc Stroker Honda El...
doing 90MPH+ on a MOPED!! 120cc STROKER HONDA ELITE speed runs:
• 93MPH on a SCOOTER! To...
#2stroke #hondaelite #moped #120cc #stroker #fast #honda #short #dio #dd50 #stuntscooter #gy6 #150cc #moped #wheelies

[@JonahNAloha]

The shop looks good Braddah,

[@andyproctor3588]

Definitely looking good guys pretty excited to see that boy roll we appreciate the video as always turning some of my Big bike guys on to your Channel watching you on the big screen outside with a few adult beverages waving her hands from down here in Florida

[@MOPBOYZ]

appreciate your support man !

[@snoopysrc]

MopBoyz that's pretty awesome I bet you can't wait to ride you should make it your daily driver

[@PabloEscobar-mx2eu]

Y’all gotta come down to oahu for the moped outlaw cruises. I got a faded black E with a scorpion pipe.

[@radio-180cc]

2:41 lmao 😂

[@vinnyl.3931]

I remeber doing motor mounts on my af16, it was a tough job without that tool

[@MOPBOYZ]

that tool saved a lot of time

[@jamiemiller1448]

Still looking foreward for Chuck to put on the S23 Pipe and see the difference.

[@sdugasjr]

Just got done doing an almost identical setup to my AF16, got it swapped into my 87 Elite and now I’m working on breaking it in. Sick build man!

[@sdugasjr]

Also, I’m running an Arrow pipe and it’s dripping oil from the slip fitting, how do I stop it from doing that?

[@MOPBOYZ]

throw some honda bond in there

[@sdugasjr]

@@MOPBOYZ bet, thank you bro 🙏🏻

[@ogKEGGY]

@@sdugasjr you still have the original AF05 gears from the 87? I need a set as long as they're the right ones.

[@sdugasjr]

@@ogKEGGY I’d gladly let you take them but the 05E is gonna go in a spree for my pops, sorry man

[@2slow2stroke]

2:40 the side eye 😂

[@bryantremols5644]

Sick vid bro what other engine fits a yahmaha scooter? Need a lil help

[@ogKEGGY]

@scooterswapshop send this man a crank puller! 😂

[@MOPBOYZ]

im saying

[@Scooterswapshop]

we tried, he wants to use the torch, helps him look like more of a manly man

[@fares-220]

Yes sir

[@stuntbiker88]

i love it bro wow

[@MetalDestruction]

thats weird because scooter swap shop said you can run a big bore kit with no issues on the stock crankshaft on my 99 zuma

[@MOPBOYZ]

you can but the stock prebug cranks are weak and wouldnt last long

[@MetalDestruction]

@@MOPBOYZ well they would have sold me a crank to if that was the case wouldn't you think? I mean they are a pretty reputable shop Arnt they?

[@BigEpinstriping]

Will those clear front turn signals fit the SB50 handlebar plastics? BTW, thanks for the tip on the Super Clean! gotta go to my local O'Rileys to pick some up today! lots of 2-stroke sludge on my project.

[@MOPBOYZ]

the clear fronts are the same yessir

[@louismoore3314]

Rock on

[@inagoodschmude9550]

I love my ‘01 Elite. Already have arrow pipe and stock carb jetted to match. Planning to do Corsa BBK this summer, should I keep stock crank in there or go straight to a full circle crank? Thanks!

[@kody5779]

😭 I've install my malossi MHR crank and it ain't spinning freely in the case like yours is, with bolts loose, yes, tight/ no.

[@mortenpoulsen8434]

dude can you help me with my gy6? it runs awful but if i brake it runs normal xD

[@retrosmoke]

Yo man I’m looking for one of these elites in the U.K, don’t think we have them… is it the same as the Honda vision?! The seat looks too big on the vision in comparison..

[@MOPBOYZ]

yea i believe theyre called honda visions on other countries, they probably have minor differences

[@retrosmoke]

@@MOPBOYZ cheers man gonna have a punt on one

[@Jay.ahamay]

Fireeee

[@Rawboh]

Is there a reason he put the gasket maker or Honda bond on the outside instead of between the case halves where crank goes?

[@MOPBOYZ]

you 100% have to put it in between the cases, which i did in the vid @ 9:39, you just missed it. you can run it on outside too just to be double safe, but definitely not needed.

[@Rawboh]

@@MOPBOYZ Damn I definitely missed it 🤣 I was like are scooter cases that smooth??! I don’t know anything about them besides what I see on your channel

[@bradentibbles]

can you link that bushing tool? I already got new bushings but couldn't get the old ones out.

[@MOPBOYZ]

www.ebay.com/itm/193182689014

[@scout2m448]

radical

[@reidkotyk7568]

hey i got a 2 stroke ae 50 and cant find any parts do you have any suggestions on any mods or anything

[@MOPBOYZ]

the suzuki ? nope never seen anything on those

[@JonahNAloha]

When installing the crank, do you need to heat up the motor case also like you did the bearings?

[@MOPBOYZ]

no but i typically will heat up the bearing inner ring lightly so it helps get over the crank part.

[@JonahNAloha]

How can I get some mop boys merch? I wanna rock one of those shirts here in Hawaii.

[@MOPBOYZ]

www.mopboyz.com bros

[@zalmanfans1334]

Could you make some videos that are a little longer ? I know making videos is stressful but I'd like some longer videos

[@joshuataft5541]

Bro I need you help I have a grom clone scooter.i rode all last year. It ran for a bit this year but now won't start.. everything is new and I went through everything..it turns over but won't start..I used starting fluid before but it's not working now..I heard mayb compression but I'm no mechanic..I'm gna have to get a real bike so it starts

[@maxjohnson3196]

Adjust your valve lash

[@joshuataft5541]

@@maxjohnson3196 what do you mean..what's that...and thanx for the tip I will have to check..I'm so upset..it was going so good and was reliable..then all of a sudden..I wasn't sure if it was Biden gas..that's the only thing different..

[@joshuataft5541]

@@maxjohnson3196 I got it going buddy .I think the airbox hose wansnt a good seal..if that would make it not run...It looked a little bic crooked.. but it was running the other day..I'm jst glad it's running..I sat it in the sun for a while after and it came to life...hope it stays reliable

[@danielyemane9171]

Hi, would this crank go into a af 05 vision ?

[@MOPBOYZ]

no af05 is different

[@danielyemane9171]

@@MOPBOYZ Thanks

[@brmotoren9889]

Those dio engines and peugeot verticaal engines are almost identical, so you know

[@maxjohnson3196]

Lol been pushin my stock prebug crank to 11k. Gotta replace it soon i bet 🥴

[@MOPBOYZ]

didnt yours blow up on ferry2ferry?

[@bainislavas116]

do you know how to get the perfect belt lenght and width?

[@MOPBOYZ]

buy oem honda belt & shims

[@bainislavas116]

@@MOPBOYZ i have the BETA ARK its a minarelli engine and an oem belt is too short for them

[@ogKEGGY]

You want to sell the stock front shocks?

[@MOPBOYZ]

i have a few elite front ends id sell

[@ogKEGGY]

@@MOPBOYZ I'll shoot you a message.

[@maxjohnson3196]

Me love you very long time! 5$!

[@everestreagal8913]

You’re working on an elite brother, no DIo insight of that garage let alone a af18/27 engine .

[@MOPBOYZ]

I have 3 dios in my attic and 5 more in the seat of my elite, you dont know me

[@everestreagal8913]

Post one and I’ll cash app you 100$ and not chucks homeboys black dio 😂😂😂 it’s kool bro DIo are rare no need to cap

[@bainislavas116]

first

[@juicyj3989]

Where did you get the one piece license plate thing ?